Resumen del contenido incluido en la página 1
MSI
MICRO-STAR INTERNATIONAL
MS-6575 (v1.X) M-ATX Mainboard
Version 1.0
G52-MA00542
i
Resumen del contenido incluido en la página 2
Manual Rev: 1.0 Release Date: March 2002 FCC-B Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equip- ment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accor- dance with the ins
Resumen del contenido incluido en la página 3
Edition March 2002 Copyright Notice The material in this document is the intellectual property of MICRO-STAR INTERNATIONAL. We take every care in the preparation of this document, but no guarantee is given as to the correctness of its contents. Our products are under continual improvement and we reserve the right to make changes without notice. Trademarks All trademarks are the properties of their respective owners. ® ® Intel and Pentium are registered trademarks of Intel Corporation. ® PS/2 an
Resumen del contenido incluido en la página 4
Safety Instructions 1. Read the safety instructions carefully. 2. Save this Users Guide for possible use later. 3. Keep this equipment away from humidity. 4. Lay this equipment on a stable and flat surface before setting it up. 5. The openings on the enclosure are used for air convection and to prevent the equipment from overheating. Note: Do not cover the openings. 6. Make sure that the power voltage is within its safety range and has been adjusted properly to the value of 110/220V before con
Resumen del contenido incluido en la página 5
CONTENTS Chapter 1. Getting Started ........................................................................ 1-1 Mainboard Specification ...................................................................... 1-2 Mainboard Layout ............................................................................... 1-4 Quick Components Guide .................................................................... 1-5 Chapter 2. Hardware Setup .................................................................
Resumen del contenido incluido en la página 6
Connectors ......................................................................................... 2-14 Floppy Disk Drive Connector: FDD1 ........................................... 2-14 IrDA Infrared Module Header: IR1 .............................................. 2-14 Hard Disk Connectors: IDE1 & IDE2 ........................................... 2-15 CD-In Connector: CD_IN1 .......................................................... 2-16 CPUFAN1/CHSFAN1/PWRFAN1 ...............................
Resumen del contenido incluido en la página 7
Advanced Chipset Features............................................................... 3-12 Integrated Peripherals ........................................................................ 3-14 Power Management Setup ................................................................. 3-20 PNP/PCI Configurations ..................................................................... 3-24 PC Health Status ................................................................................ 3-26 Frequency/
Resumen del contenido incluido en la página 8
Getting Started Chapter 1. Getting Started 1 Getting Started Thank you for purchasing the MS-6575 v1.X M-ATX mainboard. The MS-6575 v1.X is based on SiS 645/650 & SiS 961 chipsets for optimal system ® ® efficiency. Designed to fit the advanced Intel Pentium 4 processors in the 478 pin package, the MS-6575 delivers a high performance and professional desktop platform solution. TOPICS Mainboard Specification 1-2 Mainboard Layout 1-4 Quick Components Guide 1-5 1-1
Resumen del contenido incluido en la página 9
Chapter 1 Mainboard Specification CPU ® Support Socket 478 for Intel Pentium 4 Williamette & Northwood processors Core Frequency from 1.7 GHz to 2.2 GHz Chipset SiS 645/650 HMAL/IGUI HMAL (702-pin BGA) - High performance host interface (400MHz) - 64-bit performance DDR333/DDR266/DDR200 memory controller - Integrated A.G.P. compliant target/66 MHz Host-to-PCI bridge - High throughput SiS HyperZip connect to SiS961 HyperZip Media I/O - Dedicated isochronous response queue SiS 961 HyperZip Media I/
Resumen del contenido incluido en la página 10
Getting Started On-Board IDE Dual IDE controllers integrated in SiS 961 Support P/O, Bus Master, Ultra DMA 66/100 operation Can connect up to four IDE devices. On-Board Peripherals On-board Peripherals include: - 1 floppy port supports 2 FDD with 360K, 720K, 1.2M, 1.44M and 2.88Mbytes - 2 serial ports COM A + COM B (for SiS645, optional) - 1 VGA port (for SiS 650, optional) - 1 parallel port - 1 RJ-45 LAN jack (optional) - 6 USB ports (Rear x 2/ Front x 4) - 1 Line-In/Line-Out/Mic-In/Game port
Resumen del contenido incluido en la página 11
JPW1 Top : Game port Bottom: Line-Out JP1 SiS Line-In Mic 645/650 BIOS IR1 CHSFAN1 RTL 8139C Codec PCI Slot 3 JUSB1 JWL1 JAUD1 JUSB4 JSMI1 JCI1 Chapter 1 Mainboard Layout T: mouse B: keyboard CPUFAN1 ATX Power Supply PWRFAN1 CD_IN1 Winbond W83697HF AGP Slot PCI Slot 1 BATT + PCI Slot 2 JFP1 SiS 961 JABAT1 JWR1 CNR MS-6575 v1.X M-ATX Mainboard 1-4 IDE 2 IDE 1 FDD1 DDR 1 DDR 2
Resumen del contenido incluido en la página 12
Getting Started Quick Components Guide Component Function Reference CONN1 ATX 20-pin power connector See p. 2-7 JPW1 ATX 12V power connector See p. 2-7 JKBMS1 Mouse connector See p. 2-9 JKBMS1 Keyboard connector See p. 2-9 COM A & B (optional) Serial port connectors See p. 2-11 VGA Connector (optional) Connecting to VGA monitor See p. 2-11 LPT1 Parallel port connector See p. 2-12 FDD1 Floppy disk drive connector See p. 2-14 IR1 IrDA infrared module connector See p. 2-14 IDE1~ IDE2 Hard disk conn
Resumen del contenido incluido en la página 13
Hardware Setup Chapter 2. Hardware Setup 2 Hardware Setup This chapter provides you with the information about hardware setup procedures. While doing the installation, be careful in holding the components and follow the installation procedures. For some components, if you install in the wrong orientation, the components will not work properly. Use a grounded wrist strap before handling computer components. Static electricity may damage the components. TOPICS Central Processing Unit: CPU 2-2 Mem
Resumen del contenido incluido en la página 14
Chapter 2 Central Processing Unit: CPU ® ® The mainboard supports Intel Pentium 4 processor in the 478 pin package. The mainboard uses a CPU socket called PGA478 for easy CPU installation. When you are installing the CPU, make sure the CPU has a heat sink and a cooling fan attached on the top to prevent overheating. If you do not find the heat sink and cooling fan, contact your dealer to purchase and install them before turning on the computer. CPU Installation Procedures Open Lever 1. Pull the
Resumen del contenido incluido en la página 15
Hardware Setup Installing the CPU Fan As processor technology pushes to faster speeds and higher performance, thermal management becomes increasingly important. To dissipate heat, you need to attach the CPU cooling fan and heatsink on top of the CPU. Follow the instructions below to install the Heatsink/Fan: 1. Locate the CPU and its retention 2. Position the heatsink onto the re- mechanism on the motherboard. tention mechanism. retention mechanism 3. Mount the fan on top of the 4. Press the two
Resumen del contenido incluido en la página 16
Chapter 2 5. Connect the fan power cable from the mounted fan to the 3-pin fan power connector on the board. fan power cable CPU Core Speed Derivation Procedure If CPU Clock = 100MHz Core/Bus ratio = 14 then CPU core speed = Host Clock x Core/Bus ratio = 100MHz x 14 = 1.4GHz Overclocking This motherboard is designed to support overclocking. However, please make sure your components are able to WARNING! tolerate such abnormal setting, while doing overclocking. Any attempt to operate beyond pr
Resumen del contenido incluido en la página 17
Hardware Setup Memory The mainboard provides 2 slots for 184-pin, 2.5V unbuffered DDR DIMM with 4 memory banks. You can install PC1600/PC2100 DDR/PC2700 SDRAM modules on the DDR DIMM slots (DDR 1~2). To operate properly, at least one DIMM module must be installed. DDR DIMM Slots Introduction to DDR SDRAM DDR (Double Data Rate) SDRAM is similar to conventional SDRAM, but doubles the rate by transferring data twice per cycle. It uses 2.5 volts as op- posed to 3.3 volts used in SDR SDRAM, and requi
Resumen del contenido incluido en la página 18
Chapter 2 DDR Module Combination You can install either single-sided or double-sided 184-pin DDR DIMM modules into DDR DIMM slots to meet your needs. Different from the SDR DIMM, the DDR DIMM has only one notch on the center of module. The number of pins on either side of the breaks are different. The module will only fit in the right orientation. You can install memory modules in any combination as follows: Slot Momory Module Total Memory Slot 1 64MB, 128MB, 256MB, 64MB~1GB (Bank 0 & 1) 512M
Resumen del contenido incluido en la página 19
Hardware Setup Power Supply The mainboard supports ATX power supply for the power system. Be- fore inserting the power supply connector, always make sure that all compo- nents are installed properly to ensure that no damage will be caused. ATX 20-Pin Power Connector: CONN1 This connector allows you to connect to an ATX power supply. To con- nect to the ATX power supply, make sure the plugs of the power supply is inserted in the proper orientation and the pins are aligned. Then push down the powe
Resumen del contenido incluido en la página 20
Chapter 2 Back Panel The Back Panel provides the following connectors: For SiS 650 Chipset Mouse Parallel Port Midi/Joystick Lan Jack Keyboard COM A L-out L-in MIC USB Ports VGA For SiS 645 Chipset Mouse Parallel Port Midi/Joystick Lan Jack Keyboard COM A L-out L-in MIC USB Ports COM B 2-8
