Manual de instrucciones de Microsoft GFK-1167B

Resumen del contenido incluido en la página 1

4
PLC CPUs
62
IC697CSE925
64 MHz, 32-Bit Floating Point Central Processing Unit
GFK-1167B
1 Mbyte Memory, State Logic
August 1997
64 MHz, 32-Bit Floating Point Central Processing Unit 1 Mbyte Memory, State Logic (IC697CSE925)
datasheet GFK-1167B
a45242
Features
Supports State Logic control programming
Supports floating point calculations

Single slot CPU.
OK

12K inputs and outputs (any mix).
RUN


ENABLED
Up to 8K analog I/O.
B

Resumen del contenido incluido en la página 2

2 PLC CPUs GFK-1167B 64 MHz, 32-Bit Floating Point Central Processing Unit August 1997 1 Mbyte Memory, State Logic and all of the IC697 family of discrete and analog I/O a45243 MEMORY PROTECT modules. KEY SWITCH User Memory Program and data memory for the CSE 925 is provided by a memory board with 1 Mbyte of battery-backed CMOS RAM. This memory board is an integral part of the CSE 925 module and does not need to be ordered separately. B A

Resumen del contenido incluido en la página 3

3 PLC CPUs GFK-1167B 64 MHz, 32-Bit Floating Point Central Processing Unit August 1997 1 Mbyte Memory, State Logic Make sure that rack power is off. Serial Port Install the CSE 925 module in slot 1 of rack 0 (see The 15-pin D-connector provides the connection to an Figure 2). RS-485 compatible serial port on the CPU as shown in Turn on power. Figure 2. The module should power up and the top LED should The serial connection is made from the serial port on the blink. When the diagnostic

Resumen del contenido incluido en la página 4

4 PLC CPUs GFK-1167B 64 MHz, 32-Bit Floating Point Central Processing Unit August 1997 1 Mbyte Memory, State Logic Table 1. References Reference Title 1 Programming Software User’s Manual 2 Programmable Controller Reference Manual 3 Programmable Controller Installation Manual 4 State Logic Control System User’s Manual Table 2. Specifications for IC697CSE925 Battery Shelf life 10 years at 20 C (68 F) Memory retention 6 months nominal without applied power. Current required from 5V bus