Resumen del contenido incluido en la página 1
XP-P5CM-GV/
XP-P5CM-GL
® ®
Intel Pentium 4 LGA775 Processor Motherboard
User's Manual
M-050501
Resumen del contenido incluido en la página 2
Copyright Declaration © 2005 Gigatrend Technology Co., Ltd. All rights reserved. No part of this manual may be reproduced, copied, translated, or transmitted in any form or by any means without express permission from Gigatrend Technology. Companies and product names mentioned in this document are trademarks or registered trademarks of their respective owners. Legal Disclaimer The information and content of this document is provided "as is", without warranty of any kind, express or implied, inc
Resumen del contenido incluido en la página 3
Contents Motherboard Layout ......................................................................... 4 1. Product Introduction .................................................................. 5 1.1. Feature Summary ............................................................................. 5 1.2. I/O Back Panel and Connectors&Jumper Setting ........................... 6 1.2.1. I/O Back Panel ....................................................................................... 6 1.2.2. Con
Resumen del contenido incluido en la página 4
Motherboard Layout KB_MS CPU_FAN LGA775 FDD ATX_12V ATX R_USB Intel 915GV j/ Intel 915GLk F_AUDIO AUDIO SUR_CEN IDE1 PCIE_16 BIOS PCI1 RTL8100C SATA2 ICH6 GEAR SATA0 CODEC PCI2 BAT CLR_CMOS PWR_LED CD_IN F_USB1 F_PANEL Only for XP-P5CM-GV. Only for XP-P5CM-GL. 4 English VGA -GV j / USB COM1 GLk LAN LPT XP-P5CM DIMM1 DIMM2 IT8712F SYS_FAN
Resumen del contenido incluido en la página 5
English 1. Product Introduction The user manual provides steps related to quick installation. If you wish to view complete product information, please select the " ",open User Manual button located on the driver CD or link to our website at http://www.axper.com to received the most up-to-date information. 1.1. Feature Summary ® ® CPU LGA775 for Intel Pentium 4 Processor ® ® Intel Pentium 4 533/800MHz FSB L2 cache depends on CPU ® Chipset North Bridge: Intel 915GV /GL ® South Bridge: Intel I
Resumen del contenido incluido en la página 6
1.2. I/O Back Panel and Connectors&Jumper Setting 1.2.1. I/O Back Panel Parallel Port LAN PS/2 Mouse Line In USB Line Out MIC In PS/2 Keyboard COM1 VGA USB PS/2 Keyboard Connects PS/2 standard keyboard and PS/2 standard PS/2 Mouse connector mouse Parallel port (LPT) Connects to printer COM1 (Serial port) Connects to serial-based mouse or data processing de- vices VGA port Connects to 15-pin D-Sub device such as a monitor USB Prior to use, please make sure that your system as well (Universal Seri
Resumen del contenido incluido en la página 7
English CPU_FAN (CPU Fan Power Connector); SYS_FAN (System Fan Power Connector) The cooler fan power connector supplies a +12V power voltage via a 3-pin/4-pin(only for CPU_FAN) power connector and possesses a ful-proof connection design. Most coolers are designed with color-coded power connector wires. A red power connector wire indi- cates a positive connection and requires a +12V power voltage. The black connector wire is the ground wire (GND). Please remember to connect the power to the cool
Resumen del contenido incluido en la página 8
F_PANEL (Front Panel Control Connector) The F_Panel Control Connector connects to certain connectors on the front panel of the system casing such as IDE Hard Disk Active LED, speaker, reset, and power on/off connectors. You can use the schematic diagram below as the basis for connection. PIN SIGNAL HD IDE Hard Disk Active LED SPK Speaker Connector 2 20 RES Reset Switch 1 19 PW Soft Power Connector MSG Message LED/Power/Sleep LED NC NC SATA0/SATA2 (Serial ATA Connector, controlled by ICH6) The SA
Resumen del contenido incluido en la página 9
English F_USB1 (Front USB Connector) Connects to the USB connector located on the front panel of the system casing (dependent on case design). Note: Please make sure that each USB connection matches its designated position. If connections are made incorrectly, the result can lead to inability to use the function or even damage. PIN SIGNAL PIN SIGNAL 6 USB Dy+ 1 POWER 2 POWER 7 GND 9 1 10 2 3 USB Dx- 8 GND 4 USB Dy- 9 NO PIN 10 NC 5 USB Dx+ SUR_CEN (Surround Center Connector) Please contact the
Resumen del contenido incluido en la página 10
2. Hardware Installation 1. Please make sure that the CPU used is supported by your motherboard. 2. Please be aware of the placement position of the CPU. If the CPU does not insert properly, do not apply force but check the placement position. 3. Please make sure that an even layer of heat sink paste is added between the CPU and the fan sink. 4. Please do not turn on the power prior to installing the fan sink. Doing so can result in overheating and lead to permanent damage to the CPU. 5. Pleas
Resumen del contenido incluido en la página 11
English 4. Make sure the CPU is properly installed and then close the load plate. Lower the socket lever and engage it to lock the CPU in place. 2.1.2. Installation of Fan Sink 1. Apply a thin coating of thermal paste to complete cover the surface of the CPU. 2. Align the four fasteners of the fan sink with the four holes around the CPU socket. Push down each fastener and you should hear a "click" when the fastener is attached. Make sure the four fasteners are attached securely. Prior to install
Resumen del contenido incluido en la página 12
2.2. Installation of Memory 1. Before installing or removing memory, please make sure that the computer power is turned off to prevent hardware damage. 2. Please make sure that the memory used is supported by the motherboard. 3. Memory modules have a foolproof insertion design. The memory can be in stalled only when facing the correct position. If you cannot insert the module, please switch directions. 4. It is recommended that memory of similar capacity, specifications and brand be used. The
Resumen del contenido incluido en la página 13
English 2.3. Installation of the Graphics Card 1. Before installing the graphics card, please carefully read the accompanying user manual. As well, make sure the computer power is turned off. 2. If you install a PCI Express x 16 card and wish to remove it, please gently press the latch to release the card as the picture below shows before removal. To install or remove an AGP graphics card, first pull out the white GEAR knob before insertion or removal. Releasing the GEAR knob will hold the graph
Resumen del contenido incluido en la página 14
Figure 1-2. 4X AGP Card Graphics Chip Maker Model Name Nvidia Gigabyte GV-GF2010D Gigabyte GA-GF3000D Gigabyte GV-GF1280-32E Gigabyte GV-GF1280T-32P Gigabyte GV-GF3200TF Gigabyte GV-GF3500TF-GH ELSA Gladiac Ultra ELSA Gladiac 517 ELSA Gladiac 517vivo ELSA Gladiac 525 A128 Leadtek WinFast A170 TH Leadtek WinFast A250 TO Leadtek WinFast A250 Ultra ATi Gigabyte GV-AR64DL-T-SI Gigabyte GV-AR64S-H Gigabyte GV-AP64D Gigabyte GV-AP64DH Gigabyte GV-AP128DG-H Gigabyte GV-AF128D-GH SiS Prolink SiS315 64MB
Resumen del contenido incluido en la página 15
English Figure 3. PCI Express x16 Card Graphics Chip Maker Model Name Nvidia Gigabyte GV-NX53128D Gigabyte GV-NX57128D Gigabyte GV-NX59128D Gigabyte GV-NX62128D Gigabyte GV-NX66256D Gigabyte GV-NX66T128VP Gigabyte GV-NX66T128D Gigabyte GV-NX68T256DH Gigabyte GV-NX55128DP Gigabyte GV-NX68U256D Gigabyte GV-NX62TC256D ASUS EN6600/TD/128 ATi Gigabyte GV-RX30S128D Gigabyte GV-RX60P128D Gigabyte GV-RX60X128V Gigabyte GV-RX70128D Gigabyte GV-RX70P128D Gigabyte GV-RX80T256V Gigabyte GV-RX80L256V Gigabyt
Resumen del contenido incluido en la página 16
16 English
Resumen del contenido incluido en la página 17
English 3. BIOS Setup BIOS (Basic Input and Output System) stores all the information of the motherboard settings that is needed for system initiation within the CMOS. The CMOS SETUP utility allows the user to make changes in BIOS configurations that are required or to activate certain features. The CMOS SETUP saves each item configuration in the CMOS SRAM of the motherboard. When the power is turned off, the battery on the motherboard supplies the required power to the CMOS SRAM. When the power
Resumen del contenido incluido en la página 18
Gives the list of options available for each item Return to Optimized default values (not applicable to main setup screen) Enters BIOSNow! feature Displays system information Saves settings and exits setup 3.2. Standard CMOS Features ø Includes the settings for items such as date, time, floppy disk drive specifications, and hard drives connected to the IDE interface. CMOS Setup Utility-Copyright (C) 1984-2005 Award Software Standard CMOS Features Date (mm:dd:yy) Fri, Ja
Resumen del contenido incluido en la página 19
English Extended IDE Drive You can use one of two methods: Auto Allows BIOS to automatically detect IDE devices during POST(default) None Select this if no IDE devices are used and the system will skip the automatic detection step and allow for faster system start up. Access Mode Use this to set the access mode for the hard drive. The two options are:Large/Auto(default:Auto) Hard drive information should be labeled on the outside drive casing. Enter the appropriate option based on this inform
Resumen del contenido incluido en la página 20
3.3. Advanced BIOS Features ø Allows the configuration of advanced settings such as boot sequence, password check, etc. CMOS Setup Utility-Copyright (C) 1984-2005 Award Software Advanced BIOS Features } Hard Disk Boot Priority [Press Enter] Item Help First Boot Device [Floppy] Menu Level} Second Boot Device [USB-FDD] Third Boot Device [Hard Disk] Select Hard Disk Boot Password Check [Setup] Device Priority # CPU Hyper-Threading [Enabled] Limit CPUID Max. to 3 [Disabled] (Note) No-Execute Memor
