Resumen del contenido incluido en la página 1
IMB200
®
Intel PentiumD/Pentium4/Celeron D
Industrial ATX Motherboard
User’s Manual
Resumen del contenido incluido en la página 2
Disclaimers The information in this manual has been carefully checked and is believed to be accurate. AXIOMTEK Co., Ltd. assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use. AXIOMTEK assumes no responsibility for any inaccuracies that may be contained in this document. AXIOMTEK makes no commitment to update or to keep current the information contained in this manual. AXIOMTEK reserves the right to make improvements to
Resumen del contenido incluido en la página 3
ESD Precautions Integrated circuits on computer boards are sensitive to static electricity. To avoid damaging chips from electrostatic discharge, observe the following precautions: Do not remove boards or integrated circuits from their anti-static packaging until you are ready to install them. Before handling a board or integrated circuit, touch an unpainted portion of the system unit chassis for a few seconds. This helps to discharge any static electricity on your body. Wear
Resumen del contenido incluido en la página 4
T a b l e o f C o n t e n t s Disclaimers .................................................................... ii ESD Precautions ........................................................... iii Chapter 1 Introduction........................................................ 1 1.1 General Description ............................................. 1 1.2 Specifications ...................................................... 2 1.3 Utilities Supported....................
Resumen del contenido incluido en la página 5
4.11 Audio Jack (Line-in/Line-Out/MIC)-CN3................. 27 4.12 ATX12V CPU Power Connector: CN14 .................. 27 4.13 Serial ATA Connectors-CN28/CN29 ...................... 28 4.14 PS/2 Keyboard/Mouse connector-CN4 .................. 29 4.15 Digital I/O Connector-CN38 .................................. 29 4.16 CD/In Connector-CN9 ........................................... 30 4.17 CPU/System FAN Connector-CN23/CN24 ............. 31 Chapter 5 Installing VGA driver..........
Resumen del contenido incluido en la página 6
On Board Device IRQ Routing ....................... 69 AppendixC Detailed memory Addess Mapping ................ 70 AppendixD I/O Shield........................................................ 71 vi
Resumen del contenido incluido en la página 7
IMB200 LGA775 ATX MB User Manual Chapter 1 Introduction 1.1 General Description The IMB200 supports LGA775-pin Intel® Pentium® D (Intel Dual-Core) processor up to 3.6GHz with a 533/800MHz front side bus (FSB), and features an Intel® 865G + ICH*5 chipset. With Intel dual-core processing technology, the IMB200 provides the excellent performance to handle multitasking and to run multiple applications simultaneously. The IMB200 is specially suited for the solutions which need more e
Resumen del contenido incluido en la página 8
IMB200 LGA775 ATX MB User Manual 1.2 Specifications ® Processor: Intel Pentium D/Pentium4/Celeron ® North Bridge: Intel 82865G ® South Bridge: Intel 82801EB(ICH5) CPU Socket: LGA775 FSB: 533/800 Mhz L2 Cache: Integrated in CPU(Depend on CPU) BIOS: Phoenix Award BIOS Rev.6.00 System Memory: Support Dual Channel DDR 266/333/400 memory and the maximum capacity up to 4GB. CPU FSB DDR Type DDR Frequency 800MHz PC3200/PC2700/PC2100 400/333*/266MHz 533MHz PC2700/PC2100 333/266MH
Resumen del contenido incluido en la página 9
IMB200 LGA775 ATX MB User Manual CF Socket: Support CF Type II Socket USB Interface: 4 USB ports; USB Spec. Rev. 2.0 compliant. Hardware Monitoring: Winbond W83627HG-AW detection of CPU temperature, System temperature, Power failure and Fan speed. Watchdog Timer: Software programmable time interval and hardware reset Only (1~255 seconds) Dimensions:304.8mmx243.8mm(4 Layer)-ATX Former Environmental: Operating temperature 0 degrees to 60 degrees(Depends on CPU) CPU Relati
Resumen del contenido incluido en la página 10
IMB200 LGA775 ATX MB User Manual 1.4 Board Dimensions 4 Introduction
Resumen del contenido incluido en la página 11
IMB200 LGA775 ATX MB User Manual Chapter 2 Jumpers and Connectors 2.1 Board Layout Jumpers and Connectors 5
Resumen del contenido incluido en la página 12
IMB200 LGA775 ATX MB User Manual 2.2 Jumper Settings Followed as below detailed description for Jumper setting and installed the IMB200 for your application Jumper Setting Jumper Default Setting JP2 Watchdog Trigger Mode : OPEN Disable Short 1-2 for NMI Short 2-3 for Reset JP4 Short 3-5,4-6(Default) Short 1-3 , 2-4 for RS422/485 JP5 Short 1-2 ,7-8(Default) Short 3-4 , 7-8 for RS422 Short 5-6 , 7-8 for RS485 Com 1 RS232/422/485 Setting JP6 Short 3-5,4-6(Default) Short
Resumen del contenido incluido en la página 13
IMB200 LGA775 ATX MB User Manual 2.2.2 COM1 RS232/422/485 Settings: JP4, JP5, JP6 COM1 JP4 JP5 JP6 RS-232 Short 3-5,4-6 Short 1-2,7-8 Short 3-5,4-6 (Default) RS-422 Short 1-3,2-4 Short 3-4,7-8 Short 1-3,2-4 RS-485 Short 1-3,2-4 Short 5-6,7-8 Short 1-3,2-4 2.2.3 Clear CMOS Setting: JP7 Options Settings Normal 1-2(Default) Clear CMOS 2-3 2.2.4 CF Master/Slave Setting: JP8 Options Settings Master Short(Default) Slave Open Jumpers and Conne
Resumen del contenido incluido en la página 14
IMB200 LGA775 ATX MB User Manual 2.2.5 CF Power Setting: JP9 Options Settings 3.3V 1-2(Default) 5V 2-3 8 Jumpers and Connectors
Resumen del contenido incluido en la página 15
IMB200 LGA775 ATX MB User Manual 2.3 Connectors The following table lists the function of each connector on the IMB200. Connectors Label Connectors Label General Output CN37 Primary IDE IDE1 Connector Connector Printer Port Connector CN5 Secondary IDE IDE2 Connector COM1 CN2 Compact Flash CN26 Connector COM2 CN33 S-ATA Port 1 SATA 1 Connector COM3 CN25 S-ATA Port 2 SATA Connector 2 COM4 CN27 FDD Connector FDD USB Port 1, 2 Connector CN6 IrDA Connector CN12 USB Port 3, 4 Connecto
Resumen del contenido incluido en la página 16
IMB200 LGA775 ATX MB User Manual Connectors Label Connectors Label ATX Power Connector CN31 PCI Slot PCI1~ 5 LGA775 CPU Socket U22 AGP Slot AGP8 X1 DIO Connector CN38 10 Jumpers and Connectors
Resumen del contenido incluido en la página 17
IMB200 LGA775 ATX MB User Manual Chapter 3 Installation Before installing the processor, Please pay more attention on Intel website and obtained more information http://www.intel.com. 3.1 CPU Installation The LGA775 processor socket comes with a lever to protect the processor. Please pay more attention as below. Follow the pictures and place the processor into CPU socket. . Installation 11
Resumen del contenido incluido en la página 18
IMB200 LGA775 ATX MB User Manual . 12 Installation
Resumen del contenido incluido en la página 19
IMB200 LGA775 ATX MB User Manual Installation 13
Resumen del contenido incluido en la página 20
IMB200 LGA775 ATX MB User Manual 14 Installation
