Resumen del contenido incluido en la página 1
COMPONENT
.com Technisches Handbuch / Technical Manual
Systembaugruppe / Systemboard D1386
Resumen del contenido incluido en la página 2
Are there ... ... any technical problems or other questions which you would like to be clarified? Please contact: your sales partner your sales outlet Further information can be found in the "Safety and Ergonomics" manual. The latest information on our products, tips, updates, etc., can be found on the internet under: http://www.fujitsu-siemens.com Are there ... ... any technical problem or other question you need clarified? Please contact: your sales partner your sales outlet You will f
Resumen del contenido incluido en la página 3
Resumen del contenido incluido en la página 4
Dieses Handbuch wurde auf Recycling-Papier gedruckt. This manual has been printed on recycled paper. Ce manuel est imprimé sur du papier recyclé. Este manual ha sido impreso sobre papel reciclado. Questo manuale è stato stampato su carta da riciclaggio. Denna handbok är tryckt på recyclingpapper. Dit handboek werd op recycling-papier gedrukt. Herausgegeben von/Published by Fujitsu Siemens Computers GmbH Bestell-Nr./Order No.: A26361-D1386-Z120-1-7419 Printed in the Federal Republic of Germany AG
Resumen del contenido incluido en la página 5
German English Systembaugruppe D1386 System Board D1386 Technisches Handbuch Technical Manual Ausgabe April 2002 April 2002 edition
Resumen del contenido incluido en la página 6
Pentium and Celeron are registered trademarks of Intel Corporation, USA. Microsoft, MS, MS-DOS and Windows are registered trademarks of Microsoft Corporation. PS/2 and OS/2 Warp are registered trademarks of International Business Machines, Inc. All other trademarks referenced are trademarks or registered trademarks of their respective owners, whose protected rights are acknowledged. Copyright Fujitsu Siemens Computers GmbH 2002 All rights, including rights of translation, reproduction by print
Resumen del contenido incluido en la página 7
Contents Introduction........................................................................................................................................1 Notational conventions ..............................................................................................................1 Important notes..................................................................................................................................1 Information about boards...................................
Resumen del contenido incluido en la página 8
Resumen del contenido incluido en la página 9
Introduction Depending on the configuration chosen, some of the hardware components described may not be available on your system board. i You will find further information in the "BIOS Setup" description. Further information about drivers is provided in the readme files on the hard disk, on the supplied drivers diskettes, on the "Drivers & Utilities" or on the "ServerStart" CD. Notational conventions The meanings of the symbols and fonts used in this manual are as follows: Pay particular atte
Resumen del contenido incluido en la página 10
Important notes The shipped version of this board complies with the requirements of the EEC directive 89/336/EEC "Electromagnetic compatibility". Compliance was tested in a typical PC configuration. When installing the board, refer to the specific installation information in the Operating Manual or Technical Manual for the receiving device. Connecting cables for peripherals must be adequately shielded to avoid interference. Components can become very hot during operation. Ensure you do not touch
Resumen del contenido incluido en la página 11
Features Features The components and connectors marked are not necessarily present on the system board. System board in ATX format Intel processor Pentium 4 from 1.4 GHz and with 400 /533 MHz Front Side Bus. Pentium 4 processors support MMX technology and Intel Streaming SIMD Extensions. The size and frequency of first-level cache and second-level cache are dependent upon the processor used. Intel chipset 845G Intel 82559ET LAN controller (10/100 Mbit/s) with RJ45 interface WOL with Magi
Resumen del contenido incluido en la página 12
Features 1 AGP slot The AGP slot supports 4x AGP mode. Only AGP boards with 1.5 V are supported. IDE hard disk controller connected to PCI bus for up to four IDE drives (e.g. IDE hard disk drives, ATAPI CD-ROM drives) The IDE hard disk controller are ATA100, ultra DMA capable and support PIO modes 0-4. Floppy disk drive controller (possible formats: 720 KB, 1.44 MB, 2.88 MB) The system board supports booting from a 120 MB IDE floppy disk drive. Real-time clock/calendar with integrated
Resumen del contenido incluido en la página 13
Features Internal ports and connectors 12 4 5 6 7 8 3 9 DIMM 2 10 DIMM 1 11 12 16 15 14 13 1 = Power supply ATX 9 = Fan 3 2 = Floppy Disk Drive 10 = USB ports C / D 3 = IDE drives 3 and 4 (secondary) 11 = USB ports E / F 4 = Connector for front panel 12 = Cover monitoring 5 = IDE drives 1 and 2 (primary) 13 = SP/DIF (digital Audio) 6 = OEM LED 14 = Audio front panel 7 = COM2 15 = CD audio input 8 = Fan 2 16 = Power supply +12 V The components and connectors marked are not necessa
Resumen del contenido incluido en la página 14
Features Hard disk connection An ultra ATA/66 or ultra ATA/100 hard disk must be connected with a cable especially designed for the ultra ATA/66or ultra ATA/100 mode. Ê Connect the end of the cable marked with blue to the system board. LAN connector This system board has an optional Intel 82550ET LAN controller which supports transfer speeds of 10 Mbit/s and 100 Mbit/s. The LAN controller is equipped with a 3 KB transmission and receiving buffer (FIFO) and supports WOL function through Magic Pac
Resumen del contenido incluido en la página 15
Features Screen resolution Depending on the operating system used, the screen resolutions in the following table refer to the system board screen controller. If you are using an external screen controller, you will find details of supported screen resolutions in the Operating Manual or Technical Manual supplied with the controller. Screen resolution Refresh rate (Hz) bpp Colour 1024 x 768 120 32 16 bit 1280 x 1024 100 32 16 bit 1600 x 1200 85 32 16 bit PCI bus interrupts The following table show
Resumen del contenido incluido en la página 16
Settings with switches and jumpers Settings with switches and jumpers Switch 1 = must always be set to off Switch 2 = System BIOS recovery ON Switch 3 = must always be set to off 12 3 4 Switch 4 = must always be set to off The clock frequency of the processor is set automatically. i Recovering System BIOS - switch 2 Switch 2 enables recovery of the old system BIOS after an attempt to update has failed. To restore the old system BIOS you need a Flash BIOS Diskette (please call our customer servic
Resumen del contenido incluido en la página 17
Add-on modules Add-on modules Exit Suspend mode, switch off the device and remove the power plug from the mains supply, before carrying out any of the procedures described in this chapter! ! Even when you have switched off the device, parts (e.g. memory modules, AGP and PCI extension boards) are still supplied with power. All PCI slots support 3.3 V main and auxiliary voltages. AGP boards support 1,5 V main and auxiliary voltages. 4 DIMM 2 3 DIMM 1 2 1 6 5 1 = Socket for processor with heat sink
Resumen del contenido incluido en la página 18
Add-on modules Installing and removing processors 22 33 44 55 11 A A Ê Pull the lever in the direction of the arrow (1) and lift it as far as it will go (2). Ê Remove the old processor from the socket (3). Ê Insert the new processor in the socket so that the angled corner of the processor matches the coding on the socket (A) with regard to the position (4). The angled corner of the processor may be covered by the heat sink. In this case let yourself be guided by the marking in the rows of pins o
Resumen del contenido incluido en la página 19
Add-on modules Upgrading main memory These slots are suitable for 128, 256, 512 and 1024 Mbyte DDR memory modules of the DIMM format. Memory modules with different memory capacities can be combined. You may only use unbuffered 2,5 V memory modules. Buffered memory modules are not supported. ! DDR-DIMM memory modules must meet the PC2100 specification. Installing a memory module 2 2 Ê Push the holders on each side of the memory compartment outwards. Ê Insert the memory module into the location (1
Resumen del contenido incluido en la página 20
Add-on modules Replacing the lithium battery Incorrect replacement of the lithium battery may lead to a risk of explosion. ! The lithium battery must be replaced with an identical battery or a battery type recommended by the manufacturer (CR2032). Do not throw lithium batteries into the household waste. They must be disposed of in accordance with local regulations concerning special waste. Ensure that you insert the battery the right way round. The plus pole must be on the top! The following g
