Manual de instrucciones de Dialogic Brooktrout 931-107-05

Resumen del contenido incluido en la página 1

6. Replace the cover.
System Requirements Setting Termination Jumpers
7. Turn on your computer.
Note: Dialogic® Brooktrout® boards should not be present in the
This board must be installed in an enclosure that
for the BRI Line
computer during the installation of any operating system.
meets the following specifications:
The operating system might misinterpret the board as being
Before installing your board, set termination for the
A Pentium or later host processor
some o

Resumen del contenido incluido en la página 2

Before using your BRI service, you must configure Board Status LED LEDs on the Dialogic® Brooktrout® Using the Dialogic® Brooktrout® certain parameters. See your LAN Fax documentation for details. Board Status LED Meaning Board TruFax® BRI Board See Figure 4 for pinout details for your board: Flashing yellow Board is powered up and is Once you have installed the TruFax® BRI board, install and The LEDs on the board provide information about the passing self test checks. configure your voice