Resumen del contenido incluido en la página 1
LBPS310A-KIT
LBPS311A
LBPS312A
Hardened PoL PoE Ethernet Extenders
Hardened PoL PoE Ethernet Extenders
®
Extends Power over Ethernet up to 1.2 km over ordinary
BLACK BOX
voice-grade copper wire.
Features Ethernet extension up to 2.2 km.
Customer Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S.
Support call 724-746-5500) • FREE technical support 24 hours a day,
Information 7 days a week: Call 724-746-5500 or fax 724-746-0746
• Mailing address: Black Box Corporation, 1000 P
Resumen del contenido incluido en la página 2
10/100Base-TX Hardened PoL/PoE Ethernet Extender Quick Start Guide This quick start guide describes how to install and use the Hardened Ethernet Extender. This is the Hardened Ethernet Extender of choice for harsh environments constrained by space. Installation Transmitter: This is a PoL (Power over Link) transmitter. Data and power can be delivered at the same time through one pair copper wire to turn on and communicate with a Receiver via an RJ-11 phone jack or a 2-pin Terminal Block
Resumen del contenido incluido en la página 3
10/100Base-TX Hardened PoL/PoE Ethernet Extender ∞ Connect one end of the one pair copper wire to the RJ-11 phone jack or 2-pin Terminal Block interface of the Transmitter and connect the other end to RJ-11 phone jack or 2-pin Terminal Block interface of the Receiver. ∞ Data can be transmitted between the Transmitter and the Receiver via copper wire. Physical Description The Port Status LEDs and Power Inputs Transmitter Receiver ∞ DC Terminal Block Power Inputs: 2.5A @ 48VDC (P
Resumen del contenido incluido en la página 4
10/100Base-TX Hardened PoL/PoE Ethernet Extender Power Input Assignment Power1 48VDC DC Jack T:46-57V / R:46-57V DC Power2 Power Ground Terminal T:46-57V / R:46-57V DC Power3 Block Power Ground Earth Ground DIP Switch Down Up Transmitter PoL Disable Power over Link Enable Power over Link Std (Standard) Per (Performance) Type Standard line speed Better line speed Better noise immunity Poor noise immunity Receiver Loc (Local) Rmt (Remote) Mode Set Receiver to Local Mod
Resumen del contenido incluido en la página 5
10/100Base-TX Hardened PoL/PoE Ethernet Extender Power over Link (PoL) Enabled Distance Data Rate Receiver PoE Output 300M 100Mbps 30.0W 400M 90Mbps 15.4W 600M 60Mbps 14.0W 800M 45Mbps 9.5W 1000M 35Mbps 7.0W 1200M 20Mbps 5.0W Power over Link (PoL) Disabled Power Supply Applied on Receiver Distance Data Rate Receiver PoE Output 1400M 15Mbps 30.0W 1600M 10Mbps 30.0W 1800M 3Mbps 30.0W Up to 2200M 1Mbps 30.0W The Reference Performance is tested on 24AWG Telephone wire (0.5
Resumen del contenido incluido en la página 6
10/100Base-TX Hardened PoL/PoE Ethernet Extender Ethernet Extender Connection The RJ-11 and Terminal Block port pinouts: Pin 3: Tip, Pin 4: Ring. Use a telephone line to connect two RJ-11 or Terminal Block ports between two Hardened Ethernet Extenders. Functional Description ∞ Meets EN61000-6-2 & EN61000-6-4 EMC Generic Standard Immunity for industrial environment. ∞ Ethernet port: Supports IEEE802.3/802.3u/802.3x. Auto-negotiation: 10/100Mbps, full/half-duplex; Auto MDI/MDIX.
Resumen del contenido incluido en la página 7
10/100Base-TX Hardened PoL/PoE Ethernet Extender Preface This manual describes how to install and use the Hardened Ethernet Extender. The Hardened Ethernet Extender introduced here provides one channel for Ethernet over existing voice grade copper wire. The Hardened Ethernet Extender fully complies with IEEE802.3 10Base-T and IEEE802.3u 100Base-TX standards. In this manual, you will find: ∞ Product overview ∞ Features on the Hardened Ethernet Extender ∞ Illustrative LED functions
Resumen del contenido incluido en la página 8
10/100Base-TX Hardened PoL/PoE Ethernet Extender Table of Contents Quick Start Guide............................................................................. 1 Installation........................................................................................ 1 Physical Description........................................................................ 2 The Port Status LEDs and Power Inputs ..................................... 2 10/100Base-TX and Ethernet Extender Connectors .......
Resumen del contenido incluido en la página 9
10/100Base-TX Hardened PoL/PoE Ethernet Extender Introduction The Hardened Ethernet Extender provides one channel for Ethernet over existing voice grade copper wire. This Hardened Ethernet Extender solution works in industrial applications or rugged environments. Product Overview Transmitter Receiver Product Features ∞ Meets EN61000-6-2 & EN61000-6-4 EMC Generic Standard Immunity for industrial environment. ∞ Ethernet port: Supports IEEE802.3/802.3u/802.3x. Auto-negotiati
Resumen del contenido incluido en la página 10
10/100Base-TX Hardened PoL/PoE Ethernet Extender ∞ Supports Power over Ethernet applications up to 1,200 meters (3,937ft.) for Max. 5 watts of power consumed by PoE powered devices. ∞ Power consumption: - Enable Power over Link (PoL) function: Max. 65Watts - Disable Power over Link (PoL) function: Transmitter: Max. 5W. Receiver: Max. 35W with PoE output, Max. 5W without PoE output. ∞ Power Supply: Redundant T:46-57V / R:46-57V DC Terminal Block power inputs and 48 VDC Latched DC JACK in
Resumen del contenido incluido en la página 11
10/100Base-TX Hardened PoL/PoE Ethernet Extender One-Channel Hardened Ethernet Extender Ports The Hardened Ethernet Extender provides TX ports and one Ethernet Extender port. For the TX ports, it uses RJ-45 connectors and auto senses the speed of 10/100 Mbps. For the Ethernet Extender port, it uses RJ-11 and Terminal Block connectors and auto senses the speed of Link (below 20)/20/40/60/80/100Mbps. Ethernet Extender Mode Settings Ethernet Extender mode settings are simple using a DI
Resumen del contenido incluido en la página 12
10/100Base-TX Hardened PoL/PoE Ethernet Extender Front Panel & LEDs LED Indicators The LED indicators give you instant feedback on the status of the Hardened Ethernet Extender: LEDs State Indication Power Steady Power received 1/2/3 Off Power off Power Ethernet extension interface function is Steady enabled PoL No power is transmitted over Ethernet Off extension interface Steady Powered device (PD) is connected PoE Off Powered device (PD) is disconnected Steady A valid Ex
Resumen del contenido incluido en la página 13
10/100Base-TX Hardened PoL/PoE Ethernet Extender Power over Link (PoL) Disabled Power Supply Applied on Receiver Distance Data Rate Receiver PoE Output 1400M 15Mbps 30.0W 1600M 10Mbps 30.0W 1800M 3Mbps 30.0W Up to 2200M 1Mbps 30.0W The Reference Performance is tested on 24 AWG Telephone wire (0.5 mm diameter, 1-pair wire, Cable impedance: 100 ohm). 10/100Base-TX and Ethernet Extender Connectors 10/100Base-TX Connection: The following table lists the pinouts of a 10/100Ba
Resumen del contenido incluido en la página 14
10/100Base-TX Hardened PoL/PoE Ethernet Extender Installation This chapter gives step-by-step installation instructions for the Hardened Ethernet Extender. Selecting a Site for the Equipment As with any electric device, you should place the equipment where it will not be subjected to extreme temperatures, humidity, or electromagnetic interference. Specifically, the site you select should meet the following requirements: ∞ The Surrounding Air temperature should be between -40 to +167
Resumen del contenido incluido en la página 15
10/100Base-TX Hardened PoL/PoE Ethernet Extender User’s Manual 14
Resumen del contenido incluido en la página 16
10/100Base-TX Hardened PoL/PoE Ethernet Extender Connecting to Power Redundant DC Terminal Block Power Inputs or 48-VDC DC Jack: Redundant DC Terminal Block Power Inputs Two pairs of power inputs can be used to power up this device. You only need to have one power input connected to run the Hardened Ethernet Extender. Step 1: Connect the DC power cord to the pluggable terminal block on the Hardened Ethernet Extender, and then plug it into a standard DC outlet. Step 2: Disconnect t
Resumen del contenido incluido en la página 17
10/100Base-TX Hardened PoL/PoE Ethernet Extender Power Input Assignment Power1 48VDC DC Jack T:46-57V / R:46-57V DC Power2 Power Ground T:46-57V / R:46-57V DC Terminal Power3 Block Power Ground Earth Ground User’s Manual 16
Resumen del contenido incluido en la página 18
10/100Base-TX Hardened PoL/PoE Ethernet Extender Specifications Applicable Standards IEEE802.3 10Base-T, IEEE802.3u 100Base-TX Fixed Ports 10/100Mbps Ethernet ports with RJ-45 connectors 1 x Ethernet Extender port with RJ-11 and Terminal Block connectors Speed 10Base-T 10/20Mbps for half/full-duplex 100Base-TX 100/200Mbps for half/full-duplex Ethernet Extender Link (Below 20), 20, 40, 60, 80, 100Mbps Switching Method Store-and-Forward Forwarding rate 14,880/148,810pps for 10/100Mbps
Resumen del contenido incluido en la página 19
10/100Base-TX Hardened PoL/PoE Ethernet Extender Operating Temperature -40 ~ 75 (-40 ~ 167 ) Tested for functional operation @ -40 ~ 85 (-40 ~ 185 ) Storage Temperature -40 ~ 85 (-40 ~ 185 ) Humidity 5 ~ 95%, non-condensing EMI FCC Part 15, Class A EN61000-6-4: EN55022, EN61000-3-2, EN61000-3-3 EN61000-6-2: EMS EN61000-4-2 (ESD Standard) EN61000-4-3 (Radiated RFI Standards) EN61000-4-4 (Burst Standards) EN61000-4-5 (Surge Standards) EN61000-4-6 (Induced RFI Standards
Resumen del contenido incluido en la página 20
Black Box Tech Support: FREE! Live. 24/7. Tech support the way it should be. Great tech support is just 30 seconds away at 724-746-5500 or blackbox.com. About Black Box Black Box provides an extensive range of networking and infrastructure products. You’ll find everything from cabinets and racks and power and surge protection products to media converters and Ethernet switches all supported by free, live 24/7 Tech support available in 30 seconds or less. ® © Copyright 2013. Black Box C
