Resumen del contenido incluido en la página 1
LE-363
3.5 inch Embedded Motherboard
User’s Manual
Edition 1.0
2005/9/16
Resumen del contenido incluido en la página 2
LE-363 User’s Manual Copyright Copyright 2004 - 2005. All rights reserved. This document is copyrighted and all rights are reserved. The information in this document is subject to change without prior notice to make improvements to the products. This document contains proprietary information and protected by copyright. No part of this document may be reproduced, copied, or translated in any form or any means without prior written permission of the manufacturer. All tradem
Resumen del contenido incluido en la página 3
LE-363 User’s Manual Packing List Please check the package before you starting setup the system Hardware: LE-363 little board x 1 Cable Kit: 44-pin 40-pin 44-pin 44-pin ATA33 IDE Cable x 1 USB Cable x 1 COM port & Printer Port Cable x 1 PS/2 keyboard & mouse cable x 1 Audio Cable x 1 Floppy Cable x 1 1 to 3 power output cable Other Accessories: Divers CD (including User’s Manual) x 1 Printed User’s Manual x 1 3
Resumen del contenido incluido en la página 4
LE-363 User’s Manual Index Chapter 1 ...............................................................6 1.1 ......................................................................6 1.2 .................................................................7 1.3 ..................................................................9 1.4 .........................................................................10
Resumen del contenido incluido en la página 5
LE-363 User’s Manual A.2 ..............................................................................34 A.3 .................................................................................34 A.4 < VGA Port >...............................................................................34 A.5 ................................................................................35 A.6 ............................
Resumen del contenido incluido en la página 6
LE-363 User’s Manual Introduction Chapter 1 1.1 LE-363 is the 3.5 inches embedded motherboard with AMD Geode GX533 platform, with onboard VGA, AC97 audio, dual LAN and DC 12V input interface. Based on the AMD Geode GX533 processor, the board provides many advanced features for reduced power consumption, fanless design and high cost/price rate of production. Low Power Consumption Based on the AMD Geode GX53
Resumen del contenido incluido en la página 7
LE-363 User’s Manual Introduction 1.2 General Specification Form Factor 3.5 inches embedded motherboard CPU Embedded AMD Geode GX533 400MHz Fanless with heatsink only Memory 1 x 200-pin DDRSO-DIMM up to 512MB Unbufferred, none-ECC memory supported only Chipset AMD Geode CS5535 USB Port Two internal USB1.1 ports BIOS Phoenix-Award PnP flash BIOS Green Function Power saving mode includes doze, standby and suspend mod
Resumen del contenido incluido en la página 8
LE-363 User’s Manual Introduction Ethernet Interface Controller Dual PCI based REALTEK 8100B controller Type 10Base-T / 100Base-TX, auto-switching Fast Ethernet Full duplex, IEEE802.3U compliant Connector Two external RJ45 jack on I/O panel Audio Interface Controller REALTEK ALC201A AC97 codec Output Interface Line-in, Line-out, CD-in, MIC-in Connector Onboard 10-pin header Expansion Interface Mini PCI Onboard Mini PCI socket for Type I
Resumen del contenido incluido en la página 9
LE-363 User’s Manual Introduction 1.3 Mechanical Drawing 9
Resumen del contenido incluido en la página 10
LE-363 User’s Manual Introduction 1.4 AMD Geode GX533 Processor VGA monitor TTL/LVDS LCD DDR SO-DIMM up to 512MB PCI/33Mhz Ultra DMA33 IDE USB1.1 X 2 Arbitor IT8209 8100B AC97 Audio CS5535 Floppy 8100B Serial Port GPIO PCMCIA Parallel Port Mini PCI slot IrDA BIOS 10 Block Diagram
Resumen del contenido incluido en la página 11
LE-363 User’s Manual Hardware Setup Chapter 2 2.1 CN_IR IDE Mini PCI CD IN CN_USB JFRNT CN_LVDS CN_AUDIO CN_COM2 CN_LPT CN_LCD JRTC CN_SPWR CN_JVLCD CN_12V CN_INV CN_DIO DC_IN JCRT/TFTSEL SYSFAN PCMCIA CF Connector Location 11
Resumen del contenido incluido en la página 12
LE-363 User’s Manual Hardware Setup 2.2 Jumper Function JRTC RTC/CMOS Setting JVLCD LCD Driving Voltage Setting JCRT/TFTSEL Select CRT/TFT Setting JRTC JVLCD JCRT/TFTSEL 12 Jumper Location & Reference
Resumen del contenido incluido en la página 13
LE-363 User’s Manual Hardware Setup 2.3 2.3.1 Connector Function Remark DIMM Onboard 200-pin DDR SO-DIMM socket Standard IDE 44-pin primary IDE connector Slim FDD 26-pin slim type floppy connector Slim CN_12V 4-pin power supply connector Standard CN_AUDIO 5 x 2-pin audio connector Standard CDIN 4-pin CD-ROM audio input connector Standard CN_DIO 6 x 2-pin digital I/O connector Standard CN_USB 5 x
Resumen del contenido incluido en la página 14
LE-363 User’s Manual Hardware Setup 2.4 2.4.1 The board integrates AMD Geode GX533 400MHz processor with special design for power appliance. It requires only 8.4W power consumption at most, and is totally designed for fanless system. 2.4.2 Based on AMD GX533 processor with built-in memory controller, the board provides one 200-pin DDR SO-DIMM socket support up to 512MB of capacity. To install the DDR SO-DIMM
Resumen del contenido incluido en la página 15
LE-363 User’s Manual Hardware Setup 2.5 The board’s data of CMOS can be setting in BIOS. If the board refuses to boot due to inappropriate CMOS settings, here is how to proceed to clear (reset) the CMOS to its default values. Jumper: JRTC Type: Onboard 3-pin jumper JRTC Mode 1-2 Clear CMOS 2-3 Normal Operation Default setting JRTC 1 3 CMOS Setup 15
Resumen del contenido incluido en la página 16
LE-363 User’s Manual Hardware Setup 2.6 The board supports one Ultra DMA33 IDE interface, dual channel for 2 ATAPI devices. The board also provides a Compact Flash Type I socket on secondary IDE channel and one onboard type I/II PCMICA Card Bus on the solder side. 1 43 IDE 44 2 CF PCMCIA 16 Enhanced IDE & CF Interface
Resumen del contenido incluido en la página 17
LE-363 User’s Manual Hardware Setup 2.7 The board provides a slim type floppy port; please use the 26-pin ribbon cable in the package to connect the floppy device. FDD Floppy rear side 4. Lift up this plastic bar 5. Slot the cable in (Blue paste for outside) 6. Press back the plastic bar 1. Lift up the brown plastic bar 2. Slot the cable in (Blue paste for brown bar side) 3. Press back the plastic bar Floppy Port 17
Resumen del contenido incluido en la página 18
LE-363 User’s Manual Hardware Setup 2.8 The board integrates two PCI based Ethernet controller with REALTEK 8100B, full compliance with IEEE 802.3u 100Base-T specifications and IEEE 802.3x Full Duplex Flow Control. RJ45_2 RJ45_1 18 Ethernet Interface
Resumen del contenido incluido en la página 19
LE-363 User’s Manual Hardware Setup 2.9 The board integrates AMD Geode GX533 processor with built-in 2D video engine, to provide onboard DB15 VGA connector, 24-bit TTL and 18-bit/24-bit LVDS interface. The built-in 2D video engine supports following specified functions: High-performance 2D graphics controller Alpha BLT Integrated dot clock PLL 20 2 19 1 CN_LVDS 1 2 CN_LCD CRT 40 39 1 5 3 1 JVLCD 3 1 CN_INV
Resumen del contenido incluido en la página 20
LE-363 User’s Manual Hardware Setup In order to setup the LCD display well, please check the jumper setting before you use. Jumper: JVLCD Type: onboard 3-pin header JVOLT Mode 1-2 +5V 2-3 +3.3V Default setting Connector: CN_INV Type: onboard 5-pin header Pin Description 1 +12V 2 Ground 3 Ground 4 Ground 5 ENBKL Jumper: JCRT/TFTSEL Type: onboard 3-pin header JCRT/TFTSEL Description 1 VCC 2 VGASEL 3 Ground
