Resumen del contenido incluido en la página 1
75000 SERIES B
Mainframes
E1300B and E1301B
User’s Manual
Copyright © Agilent Technologies, Inc., 1989, 1990, 1991, 2006
Manual Part Number: E1300-90005 Printed: February 2006 Edition 3
Microfiche Part Number: E1300-99005 Printed in U.S.A. E 0206
Resumen del contenido incluido en la página 2
Resumen del contenido incluido en la página 3
Certification Agilent Technologies certifies that this product met its published specifications at the time of shipment from the factory. Agilent Tech- nologies further certifies that its calibration measurements are traceable to the United States National Institute of Standards and Tech- nology (formerly National Bureau of Standards), to the extent allowed by that organization’s calibration facility, and to the calibration facilities of other International Standards Organization members. Warra
Resumen del contenido incluido en la página 4
Printing History The Printing History shown below lists all Editions and Updates of this manual and the printing date(s). The first printing of the man- ual is Edition 1. The Edition number increments by 1 whenever the manual is revised. Updates, which are issued between Editions, contain replacement pages to correct the current Edition of the manual. Updates are numbered sequentially starting with Update 1. When a new Edition is created, it contains all the Update information for the previou
Resumen del contenido incluido en la página 5
Declaration of Conformity according to ISO/IEC Guide 22 and EN 45014 Manufacturer’s Name: Agilent Technologies, Inc. Loveland Manufacturing Center Manufacturer’s Address: 815 14th Street S.W. Loveland, Colorado 80537 declares, that the product: Product Name: 75000 Series B VXI Mainframe Model Number: Agilent E1300B/E1301B Product Options: All conforms to the following Product Standards: Safety: IEC 1010-1:1990+A2:1996/EN61010-1:1993 Canada: CSA 556B UL 3111 EMC: CISPR 11:1990/EN55011:1991: Grou
Resumen del contenido incluido en la página 6
Agilent 75000 Series B Documentation Manual Descriptions Installation and Getting Started Guide. Contains step-by-step instructions for all aspects of plug-in module and mainframe installation. This guide also contains introductory programming information and examples. Agilent E1300B/E1301B Mainframe User’s Manual. Contains programming information for the mainframe, front panel operation information (for the Agilent E1301B mainframe), and general programming information for instruments installed
Resumen del contenido incluido en la página 7
1 Related Documents Agilent Instrument BASIC User’s Handbook. Includes three books: Agilent Instrument BASIC Programming Techniques , Agilent Instrument BASIC Interfacing Techniques, and Agilent Instrument BASIC Language Reference. Using Agilent Instrument BASIC with the E1405. Contains information on the version of Agilent Instrument Basic which can be installed in ROM in your E1405B Command Module. Beginner’s Guide to SCPI. Explains the fundamentals of programming instruments with Standard
Resumen del contenido incluido en la página 8
About this Manual Manual Content This manual shows how to use the Agilent E1300/E1301 Mainframe and how to operate and program instruments within the mainframe using SCPI (Standard Commands for Programmable Instruments) commands and IEEE 488.2 Common Commands. For installation and configuration information refer to the "Agilent 75000 Series B Installation and Getting Started Guide". Chapter 1: This chapter contains a mainframe description, discusses the instrument Getting Started concept, and c
Resumen del contenido incluido en la página 9
Table of Contents 1. Getting Started Using This Chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Mainframe Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Optional Mainframe Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Instrument Definition . . . . . . . . . . . . . . . . . . . .
Resumen del contenido incluido en la página 10
Using Supported Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-16 The Supported Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-16 Using the HP 700/22 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-17 Using the WYSEØ WY-30œ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-19 Usin
Resumen del contenido incluido en la página 11
The Service Request Bit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-5 Clearing the Service Request Enable Register . . . . . . . . . . . . . . . . . . . . 6-5 Standard Event Status Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-6 Unmasking Standard Event Status Bits . . . . . . . . . . . . . . . . . . . . . . . . 6-6 Reading the Standard Event Status En
Resumen del contenido incluido en la página 12
*SRE < mask> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-70 *SRE? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-71 *STB? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-71 *TRG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Resumen del contenido incluido en la página 13
C. Connecting and Configuring a Display Terminal Using this Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-1 Connecting a Terminal to the Mainframe . . . . . . . . . . . . . . . . . . . . . . . . . C-1 Configuring a Terminal for the Mainframe . . . . . . .
Resumen del contenido incluido en la página 14
6 - Table of Contents
Resumen del contenido incluido en la página 15
Chapter 1 Getting Started Using This Chapter This chapter describes the Agilent E1300B/E1301B Mainframe, defines the instrument concept, and explains how plug-in modules are designated as instruments in the mainframe. This chapter also contains introductory programming examples showing how to read and set the mainframe’s clock and calendar. This chapter contains the following sections: • Mainframe Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 • Instrument Def
Resumen del contenido incluido en la página 16
Trig Out: Allows an instrument to output a negative-going pulse to indicate the occurrence of some event such as closing a channel on a Switchbox Instrument. The signal levels are standard TTL (0V to 5V). This pulse can be used to synchronize external equipment to the instrument (see Chapter 5 for examples). You direct the pulse from the appropriate instrument to the Trig Out port using the OUTP:STAT ON command. Pacer Out: Allows you to output a square wave signal to trigger or pace external e
Resumen del contenido incluido en la página 17
1 Instrument SCPI-compatible plug-in modules installed in the mainframe are treated as independent instruments each having a unique secondary GPIB address. As Definition shown in Figure 1-3, each instrument is assigned a dedicated error queue, input and output buffers, status registers and, if applicable, dedicated mainframe memory space for readings or data. An instrument may be composed of a single plug-in module (such as a counter) or multiple plug-in modules (for a Switchbox or Scanning Vo
Resumen del contenido incluido en la página 18
Instrument Logical Instruments are identified by a logical address which directly relates to its GPIB secondary address. Instruments come from the factory with a preset logical Addresses address. You can change the factory setting during installation (see the "Agilent 75000 Series B Installation and Getting Started Guide" for instructions). A single-module instrument must have its logical address set to an integer multiple of 8 (0, 8, 16, 24, ... 240). In a multiple-module instrument, only one
Resumen del contenido incluido en la página 19
Example: Reading the Time This program reads and prints the time from the System Instrument’s internal clock. The computer used in the example is an Agilent Series 200/300 computer with Agilent BASIC as the program language. The computer interfaces to the mainframe using the General Purpose Interface Bus (GPIB). The GPIB interface select code is 7, the GPIB primary address is 09, and the GPIB secondary address is 00 (System Instrument). Resulting in a combined address of 70900. 10 OUTPUT 70900;"
Resumen del contenido incluido en la página 20
1-6 Getting Started
