Manual de instrucciones de Addonics Technologies ADI2S3GPX1-2E

Resumen del contenido incluido en la página 1

Overview



IDE Channel


Internal
SATA ports



Addonics
T E C H N O L O G I E S

eSATA

Ports


SATA/IDE RAID PCI-E Controller


Model: ADI2S3GPX1-2E


Note: The IDE devices attach to the IDE channel must be set as a master and

slave pair.






Jumper Pins
User’s Guide
Version 1.0

CON1

CON3


CON2
FCC Warning Statement
CON4

This equipment has been tested and found to comply with the limits for a class B digital
device pursuant to Pa

Resumen del contenido incluido en la página 2

Detailed View of Jumper Pins 6. Use arrow keys � and � to select chunk size from 4K, 8K, 16K, 32K, 64K Pin 1 or 128K, then press Enter. 7. Input the RAID size, press Enter. J4 8. When asked Create RAID on the select HDD (Y/N)?, press Y to accept. J3 9. At the next screen select Save And Exit Setup, press Enter. 10. When asked Save to disk &Exit (Y/N)?, press Y to exit the RAID BIOS. J2 J1 Pin 1 RAID 1 (Mirroring) 1. Press Ctrl+J when prompted to enter the RAID BIOS. J8 2. A

Resumen del contenido incluido en la página 3

Delete RAID Disk Drive Steps: 1. Press Ctrl+J when prompted to enter the RAID BIOS. 2. At the next screen select Delete RAID Disk Drive, press Enter. 1. JMB36X RAID Configurer installation 3. Use arrow keys � and � to select the array you want to delete, use the Note: To create raid volumes and monitor the status of your raid set, you need to install the JMB36X RAID Configurer. Install the utility from the CD “space” key to mark the selected array, then press DEL. 4. When asked ALL DA

Resumen del contenido incluido en la página 4

Driver Installation For A New Fresh Windows Install A new installation requires a floppy disk for the driver Technical Support installation. To make this floppy disk, copy the contents of the “Drivers\JMB36X\WIN2K_XP_2003_VISTA\Floppy32” folder, found on the If you need assistance to get your unit functioning properly, please call Addonics driver CD, onto a blank floppy disk then follow the directions below. Technical Support. Our technical staff will be happy to assist you, but they will