Resumen del contenido incluido en la página 1
Introduction Hardware Setup BIOS Setup Driver & Utility CD Appendix
AW9D-MAX
AW9D
Motherboard
Socket 775
Intel Core 2 Duo (Extreme Edition)
Intel Pentium Extreme Edition
Intel Pentium D
Intel Pentium 4
User’s Manual
LGA775 ATX Motherboard
Intel 975X / ICH7R
1066MHz FSB
Dual DDR2 800
Dual PCI-E X16 Graphics Slots
Dual GbE LAN (AW9D-MAX)
8x SATA 3Gb/s (AW9D-MAX)
IEEE 1394 (AW9D-MAX)
About this Manual:
This user’s manual contains all the information you
Resumen del contenido incluido en la página 2
AW9D-MAX, AW9D User’s Manual st English, 1 Edition August, 2006 Copyright and Warranty Notice The information in this document is subject to change without notice and does not represent a commitment on part of the vendor, who assumes no liability or responsibility for any errors that may appear in this manual. No warranty or representation, either expressed or implied, is made with respect to the quality, accuracy or fitness for any particular part of this document. In no
Resumen del contenido incluido en la página 3
Introduction Hardware Setup BIOS Setup Driver & Utility CD Appendix Contents 1. Introduction..................................................................... 1-1 1.1 Features & Specifications .............................................................1-1 1.2 Motherboard Layout.....................................................................1-3 1.2.1 AW9D-MAX.........................................................................1-3 1.2.2 AW9D ..............................
Resumen del contenido incluido en la página 4
3.1.2 ABIT EQ .............................................................................3-4 3.2 Standard CMOS Features............................................................3-11 3.3 Advanced BIOS Features............................................................3-14 3.4 Advanced Chipset Features.........................................................3-18 3.5 Integrated Peripherals................................................................3-20 3.6 Power Management Setup....
Resumen del contenido incluido en la página 5
Introduction 1. Introduction 1.1 Features & Specifications CPU Designed for Intel Pentium 4 LGA775 processor with 1066/800 MHz FSB Supports Intel Core 2 Duo(Extreme Edition), Pentium Extreme Edition, Pentium D, & Pentium 4 Processors Supports Enhanced Intel Speedstep Technology (EIST) Supports Intel Extended Memory 64 Technology (EM64T) Supports Intel Virtualization Technology Supports Intel Execute Disable Bit capability Supports Intel Hyper-Threading Technology Chi
Resumen del contenido incluido en la página 6
7x SATA connectors (For model “AW9D-MAX” only) 4x SATA connectors (For model “AW9D” only) 2x USB 2.0 headers 2x IEEE1394 headers Rear Panel I/O 1x PS/2 Keyboard connector 1x PS/2 Mouse connector 1x eSATA connector (For model “AW9D-MAX” only) 4x USB 2.0 connectors 2x RJ-45 Gigabit LAN connectors (For model “AW9D-MAX” only) 1x RJ-45 Gigabit LAN connector (For model “AW9D” only) Serial ATA - Connector “SATA1” ~ “SATA4”: 4x SATA 3Gb/s offered by Intel ICH7R suppo
Resumen del contenido incluido en la página 7
Introduction 1.2 Motherboard Layout 1.2.1 AW9D-MAX AW9D-MAX, AW9D 1-3
Resumen del contenido incluido en la página 8
1.2.2 AW9D 1-4 AW9D-MAX, AW9D
Resumen del contenido incluido en la página 9
Hardware Setup 2. Hardware Setup In this chapter we will elaborate all the information you need upon installing this motherboard to your computer system. ※ Always power off the computer and unplug the AC power cord before adding or removing any peripheral or component. Failing to so may cause severe damage to your motherboard and/or peripherals. Plug in the AC power cord only after you have carefully checked everything. The motherboard and its component layouts illustrated in this cha
Resumen del contenido incluido en la página 10
To install this motherboard: 1. Locate all the screw holes on the motherboard and the chassis base. 2. Place all the studs or spacers needed on the chassis base and have them tightened. 3. Face the motherboard’s I/O ports toward the chassis’s rear panel. 4. Line up all the motherboard’s screw holes with those studs or spacers on the chassis. 5. Install the motherboard with screws and have them tightened. ※ To prevent shorting the PCB circuit, please REMOVE the metal studs or space
Resumen del contenido incluido en la página 11
Hardware Setup 2.3.1 CMOS Memory Clearing Header and Backup Battery The time to clear the CMOS memory occurs when (a) the CMOS data becomes corrupted, (b) you forgot the supervisor or user password preset in the BIOS menu, (c) you are unable to boot-up the system because the CPU ratio/clock was incorrectly set in the BIOS menu, or (d) whenever there is modification on the CPU or memory modules. This header uses a jumper cap to clear the CMOS memory and have it reconfigured to the defau
Resumen del contenido incluido en la página 12
CMOS Backup Battery: An onboard battery saves the CMOS memory to keep the BIOS information stays on even after disconnected your system with power source. Nevertheless, this backup battery exhausts after some five years. Once the error message like “CMOS BATTERY HAS FAILED” or “CMOS checksum error” displays on monitor, this backup battery is no longer functional and has to be renewed. To renew the backup battery: 1. Power off the system and disconnect with AC power source. 2. Re
Resumen del contenido incluido en la página 13
Hardware Setup 2.3.2 Wake-up Header These headers use a jumper cap to enable/disable the wake-up function. USB-PWR1: Pin 1-2 shorted (Default): Disable wake-up function support at USB1 port. Pin 2-3 shorted: Enable wake-up function support at USB1 port. USB-PWR2: Pin 1-2 shorted (Default): Disable wake-up function support at USB2 port. Pin 2-3 shorted: Enable wake-up function support at USB2 port AW9D-MAX, AW9D 2-5
Resumen del contenido incluido en la página 14
2.4 Connecting Chassis Components 2.4.1 ATX Power Connectors These connectors provide the connection from an ATX power supply. As the plugs from the power supply fit in only one orientation, find the correct one and push firmly down into these connectors. ATXPWR1: ATX 24-Pin Power Connector The power supply with 20-pin or 24-pin cables can both be connected to this 24-pin connector. Connect from pin-1 for either type. However, a 20-pin power supply may cause the system unstable or
Resumen del contenido incluido en la página 15
Hardware Setup 2.4.2 Front Panel Switches & Indicators Headers This header is used for connecting switches and LED indicators on the chassis front panel. Watch the power LED pin position and orientation. The mark “+” align to the pin in the figure below stands for positive polarity for the LED connection. Please pay attention when connecting these headers. A wrong orientation will only cause the LED not lighting, but a wrong connection of the switches could cause system malfunction.
Resumen del contenido incluido en la página 16
2.4.3 FAN Power Connectors These connectors each provide power to the cooling fans installed in your system. CPUFAN1: CPU Fan Power Connector NBFAN1: Chipset Fan Power Connector SYSFAN1: System Fan Power Connector AUXFAN1~3, OTESFAN1~2: Auxiliary Fan Power Connector ※ These fan connectors are not jumpers. DO NOT place jumper caps on these connectors. 2-8 AW9D-MAX, AW9D
Resumen del contenido incluido en la página 17
Hardware Setup 2.5 Installing Hardware ※ DO NOT scratch the motherboard when installing hardware. An accidentally scratch of a tiny surface-mount component may seriously damage the motherboard. ※ In order to protect the contact pins, please pay attention to these notices: 1. A maximum 20 cycles of CPU installation is recommended. 2. Never touch the contact pins with fingers or any object. 3. Always put on the cap when the CPU is not in use. 2.5.1 CPU Socket 775 1. Place the board so
Resumen del contenido incluido en la página 18
4. Visually inspect if the CPU is seated well into the socket. The alignment key must be located in the notch of package. 5. Use your left hand to hold the load plate, and use your right thumb to peel the cap off. ※ The cap plays an important role in protecting contact pins. In order to prevent bent pin, PUT ON the cap after operation or testing. 6. Lower the plate onto the CPU package. Engage the load lever while gently pressing down the load plate. 7. Secure the lever wi
Resumen del contenido incluido en la página 19
Hardware Setup 8. Place the heatsink and fan assembly onto the socket. Align the four fasteners toward the four mounting holes on the motherboard. 9. Press each of the four fasteners down into the mounting holes. Rotate the fastener clock-wise to lock the heatsink and fan assembly into position. 10. Attach the four-pin power plug from the heatsink and fan assembly to the CPU FAN connector. ※ The installation procedures vary with different types of CPU fan-and-heatsink ass
Resumen del contenido incluido en la página 20
2.5.2 DDR2 Memory Slots This motherboard provides four 240-pin DIMM slots for Dual Channel DDR2 800/667 memory modules with memory expansion size up to 8GB. To reach the optimum performance in dual-channel configurations, install identical DDR2 DIMM pairs for each channel. Install DIMMs with the same CAS latency. To reach the optimum compatibility, obtain memory modules from the same vendor. Due to chipset resource allocation, the system may detect less than 4GB of system mem
