Manual de instrucciones de Vantec MRK-103F

Resumen del contenido incluido en la página 1

EZ •Swap Quick Installation Guide
Model MRK-103F



1. Front Panel Description
6
1. HDD Access indicator
5
2. Power indicator
3. Active-handle
4. Handle
5. Cartridge frame
6. Key lock

4
1 2 3
2. Function Settings and Operation
2-1 Power Indicator and HDD Access indicator
When power is turned on, the indicator will displays the following

Item Indicator
Power Indicator Green LED
HDD A

Resumen del contenido incluido en la página 2

Model MRK-103F 1-2. Pull the handle outwards to remove the carrier body away from the cartridge frame. (Fig.2) Fig. 2 Step 2 2-1. Push the release latch to slide the top cover backwards and remove. (Fig.3) PUSH Fig. 3 Step 3 3-1. Insert the DC power cable and IDE cable on the HDD. (Fig.4) Fig. 4 3-2. Position the HDD into carrier body and secure the HDD using the four 6#-32 screws provided. (Fig.5) Fig. 5 Step 4 4-

Resumen del contenido incluido en la página 3

Model MRK-103F Step 5 5-1. Slide the carrier body back into the cartridge frame. (Fig.7) Fig. 7 5-2. Push carrier body further into cartridge frame until fully inserted. (Fig. 8) Fig. 8 Step 6 6-1. Install the module into a 5.25” half-height expansion bay. Insert the DC power cable and the IDE cable of the user’s chassis to connectors located at the back plane of the cartridge frame. Then, fully secure the module to the chassis by usi