Resumen del contenido incluido en la página 1
1.1.1.1.1.1.1.1 TOSHIBA
TOSHIBA
Hard Disk Drive Specification
1.8 inch Hard Disk Drive
MK6006GAH/MK4006GAH
/MK3006GAL
Rev. 01
REF 360050398
Toshiba Corporation Digital Media Network Company
Page 1 of 153
© 2003, Copyright TOSHIBA Corporation All Rights Reserved
Resumen del contenido incluido en la página 2
Revision History 1.8 inch Hard Disk Drive MK6006GAH/MK4006GAH/MK3006GAL Product Specification Revision Date 00 2004-07-01 Initial issue 01 2004-08-10 Toshiba Corporation Digital Media Network Company Page 2 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved
Resumen del contenido incluido en la página 3
The hard disk drive and product specifications contain essential information for the protection of users and others from possible injury and property damage and to ensure correct handling. Please check that you fully understand the definition of the following messages (signs and graphical symbols) before going on to read the text, and always follow the instructions. Please describe requirements in the instruction manual of the product in which the drive is mounted and ensure tha
Resumen del contenido incluido en la página 4
USAGE RESTRICTIONS Since the drive is not designed or manufactured to be used for a system including equipment (*1) directly linked with human life, etc., Toshiba Corporation shall not be liable for this type of use. *1: Equipment directly linked with human life, etc. corresponds to the following. Medical equipment such as life support systems, equipment used in operations etc. When the drive is to be used for a system including equipment (*2) l
Resumen del contenido incluido en la página 5
SAFETY Do not disassemble, remodel or repair. Disassembly, remodeling or repair may cause injury, failure, or data loss. Do not drop. Dropping may cause injury. Do not touch sharp edges or pins of the drive. Sharp protrusions etc. may cause injury. Hold the drive by both sides when carrying it. Toshiba Corporation Digital Media Network Company Page 5 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved
Resumen del contenido incluido en la página 6
SAFETY Observe the following to prevent failure, malfunction or data loss. NOTE Follow the specifications for 7. POWER SUPPLY (page17), 9. ENVIRONMENT (page 22, 23), etc. when using. Failure to do so may cause damage to the drive. Observe cautions in 8.3 MOUNTING INSTRUCTION (page18) and 10.6 LOAD / UNLOAD (page27 ) when handling, setting up, or using the drive. Take anti-static measures in order to avoid damage to the drive when handling it. The drive uses parts susc
Resumen del contenido incluido en la página 7
TABLE OF CONTENTS 1. SCOPE........................................................................................................................................................ 11 2. GENERAL DESCRIPTION....................................................................................................................... 11 3. KEY FEATURES ....................................................................................................................................... 13 4. BASIC SPE
Resumen del contenido incluido en la página 8
10.4 HOST INTERFACE TIMING........................................................................................................................ 35 10.4.1 Program I/O Write Timing............................................................................................................. 35 10.4.2 Program I/O Read Timing.............................................................................................................. 36 10.4.3 Multiword DMA Write Timing .......................
Resumen del contenido incluido en la página 9
10.8.35 Set Features (EFh)....................................................................................................................96 10.8.36 SECURITY SET PASSWORD (F1h) .......................................................................................97 10.8.37 SECURITY UNLOCK (F2h).....................................................................................................98 10.8.38 SECURITY ERASE PREPARE (F3h) ..................................................
Resumen del contenido incluido en la página 10
Table of Figures FIGURE 1 MK3006GAL DIMENSIONS................................................................................................................20 FIGURE 2 MK6006GAH/MK4006GAH DIMENSIONS ............................................................................21 FIGURE 3 ATA INTERFACE CONNECTOR................................................................................................................................30 FIGURE 4 PASSWORD SET SECURITY MODE POWER-ON FL
Resumen del contenido incluido en la página 11
2. SCOPE This document describes the specifications of the following model, MK3006GAL /MK4006GAH/MK6006GAH of 1.8- inch type Winchester disk drives. . Factory Number Sales Number HDD1442 MK3006GAL HDD1564 MK4006GAH HDD1544 MK6006GAH 3. GENERAL DESCRIPTION The MK3006GAL/MK4006GAH/MK6006GAH which is noted hereinafter as MK3006GAL/MK4006GAH/MK6006GAH or as the drive comprises a series of intelligent disk drives . The drive features an ATA-2 / 3 / 4 / 5 / 6 interface embedded c
Resumen del contenido incluido en la página 12
SAFETY Do not disassemble, remodel or repair. Disassembly, remodeling or repair may cause injury, failure, or data loss. NOTE There is a certain probability of the drive causing failure including data error or data loss. Take preventive steps such as backing up data etc. without exception in order to prevent loss etc. in cases where data loss may result in loss or damage. Do not touch the top cover since application of force to it may cause damage to the drive.
Resumen del contenido incluido en la página 13
4. KEY FEATURES • High capacity in smallest size . 1.8 inch-type 2 platters accommodating formatted capacity of 60.0116GB (MK6006GAH)/40.000GB(MK4006GAH), 1 platter accommodating formatted capacity of 30.0058GB(MK3006GAL). . Slim ( MK3006GAL: 5 mm in height, MK6006GAH: 8mm in height) and light (MK3006GAL: 51 gram in weight, MK6006GAH/MK4006GAH: 62 gram in weight) design. • Fast access and fast transfer rate . Quick spin up of Spindle Motor 3 sec. . Average access time 15 m
Resumen del contenido incluido en la página 14
. Low power consumption by Adaptive Power Mode Control . Toshiba Corporation Digital Media Network Company Page 14 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved
Resumen del contenido incluido en la página 15
5. BASIC SPECIFICATION MODEL MK3006GAL MK6006GAH MK4006GAH Formatted Capacity 30.0058 60.0116 40.000 ( gigabytes ) Number of sectors 58,605,120 117,210,240 78,126,048 Servo design method Sector Servo Recording method 60/61 ME2PR4+MNP Recording density Track / mm (TPI ) 4704 (119.5k) 4331 (110k) typ. Bit / mm ( BPI ) 31.8k (808k ) max. 29.0k (737k ) max. Flux change / mm ( FRPI ) 32.3k (821k ) max. 29.5k (750k ) max. Number of disks 1 2 Number of data heads 2 4 Numb
Resumen del contenido incluido en la página 16
6. PERFORMANCE MK3006GAL MK6006GAH MK4006GAH Access time ( msec ) <*1> Track to track seek <*2> 3 Average seek <*3> 15 Max. seek <*4> 26 Rotation speed ( RPM ) 4,200 + 0.1% Average Latency Time ( msec ) 7.14 Internal Transfer rate ( Mbits / sec ) 131.1 283.3 155 265 Host Transfer rate ( Mbytes / sec ) Ultra DMA mode 100 PIO mode 16.6 Sector Interleave 1:1 Track skew Yes Buffer size ( Mbytes ) 2 2 or 8 2 Cache Read Ahead Cache Write Cache S
Resumen del contenido incluido en la página 17
7. POWER REQUIREMENTS 7.1 Supply Voltage Allowable voltage 3.3V + 5% Allowable noise/ripple 70 mV p-p or less (note 1) When DC power is interrupted,+3.3V voltage drop must be greater than or equal 0V. 7.2 Power Consumption Average(note 1) MK3006GAL MK6006GAH MK4006GAH Start 1.2 W Maximum Seek (note 2) 1.1 W Typical Read / Write(note 3) 1.1 W Typical Active idle (note 4 ) 0.4 W T
Resumen del contenido incluido en la página 18
8. MECHANICAL SPECIFICATIONS 8.1 Dimension and weight MK3006GAL MK6006GAH/MK4006GAH Width (mm) 54.0 ±0.2 5.0 + 0.15 8.0 + 0.15 Height (mm) Depth (mm) 78.5±0.3 Warpage (mm) Interconnected area Width (shorter side) 0.15 max. Depth (longer side) 0.35 max. Substrate area (thickness including warpage) 5.35 max. 8.35 max. Weight 51 max. 62 max. Figure 1 and Figure 2 show an outline of the drive. 8.2 Drive Orientation The drive can be installed in all axes (6 dir
Resumen del contenido incluido en la página 19
8.3.1 Installation 1) The drive should be interconnected of mounted carefully on the surface of 0.1mm or less flatness to avoid excessive distortion. 2) The drive can be easily damaged by shocks. In order to prevent the damege, avoid giving shock to the drive. 3) Don’t apply any force to the top cover. 4) The drive contains several parts which may be easily damaged by ESD(Electric Static Discharge). Avoid touching the interface connector pins and surface of PCB. 5) The temperature
Resumen del contenido incluido en la página 20
Figure 1 MK3006GAL Dimensions UNIT: mm Toshiba Corporation Digital Media Network Company Page 20 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved
