Resumen del contenido incluido en la página 1
1.1.1.1.1.1.1.1 TOSHIBA
TOSHIBA
Hard Disk Drive Specification
2.5 inch Hard Disk Drive
MK1032GAX
Rev. 00
REF 360051242
Toshiba Corporation Digital Media Network Company
Page 1 of 159
© 2004, Copyright TOSHIBA Corporation All Rights Reserved
Resumen del contenido incluido en la página 2
Revision History 2.5 inch Hard Disk Drive MK1032GAX Product Specification Revision Date 00 2004-09-28 Initial issue Toshiba Corporation Digital Media Network Company Page 2 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved
Resumen del contenido incluido en la página 3
The hard disk drive and product specifications contain essential information for the protection of users and others from possible injury and property damage and to ensure correct handling. Please check that you fully understand the definition of the following messages (signs and graphical symbols) before going on to read the text, and always follow the instructions. Please describe requirements in the instruction manual of the product in which the drive is mounted and ensure t
Resumen del contenido incluido en la página 4
USAGE RESTRICTIONS Since the drive is not designed or manufactured to be used for a system including equipment (*1) directly linked with human life, etc., Toshiba Corporation shall not be liable for this type of use. *1: Equipment directly linked with human life, etc. corresponds to the following. Medical equipment such as life support systems, equipment used in operations etc. When the drive is to be used for a system including equipment (*2) l
Resumen del contenido incluido en la página 5
SAFETY Do not disassemble, remodel or repair. Disassembly, remodeling or repair may cause injury, failure, or data loss. Do not drop. Dropping may cause injury. Do not touch sharp edges or pins of the drive. Sharp protrusions etc. may cause injury. Hold the drive by both sides when carrying it. Toshiba Corporation Digital Media Network Company Page 5 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved
Resumen del contenido incluido en la página 6
SAFETY Observe the following to prevent failure, malfunction or data loss. NOTE Follow the specifications for 7. POWER SUPPLY (page16), 9. ENVIRONMENT (page 22, 23), etc. when using. Failure to do so may cause damage to the drive. Observe cautions in 8.4 MOUNTING INSTRUCTION (page17) and 10.6 LOAD / UNLOAD (page26 ) when handling, setting up, or using the drive. Take anti-static measures in order to avoid damage to the drive when handling it. The drive uses parts susc
Resumen del contenido incluido en la página 7
TABLE OF CONTENTS 1. SCOPE ........................................................................................................................................................................... 11 2. GENERAL DESCRIPTION ........................................................................................................................................ 11 3. KEY FEATURES...................................................................................................................
Resumen del contenido incluido en la página 8
10.3.3 Signal Treatment..................................................................................................................................................31 10.3.4 Series resistance ..................................................................................................................................................32 10.3.5 Signal Description ............................................................................................................................
Resumen del contenido incluido en la página 9
10.8.32 SET MAX ADDRESS EXT (37h) ..................................................................................................................... 96 10.8.33 Read Native Max Address (F8h) ................................................................................................................ 97 10.8.34 Read Native Max Address EXT (27h)......................................................................................................... 97 10.8.35 Set Features (EFh).....
Resumen del contenido incluido en la página 10
Table of Figures FIGURE 1 MK1032GAX DIMENSIONS................................................................................................................................19 FIGURE 2 MOUNTING RECOMMENDATION .........................................................................................................................21 FIGURE 3 ATA INTERFACE CONNECTOR ............................................................................................................................2
Resumen del contenido incluido en la página 11
2. SCOPE This document describes the specifications of the following model, MK1032GAX of 2.5- inch type Winchester disk drives. . Factory Number Sales Number HDD2D08*ZE MK1032GAX 3. GENERAL DESCRIPTION The MK1032GAX which is noted hereinafter as MK1032GAX or as the drive comprises a series of intelligent disk drives . The drive features an ATA-2 / 3 / 4 / 5 / 6 interface embedded controller that requires a simplified adapter board for interfacing to an AT or AT compatible bus
Resumen del contenido incluido en la página 12
SAFETY Do not disassemble, remodel or repair. Disassembly, remodeling or repair may cause injury, failure, or data loss. NOTE There is a certain probability of the drive causing failure including data error or data loss. Take preventive steps such as backing up data etc. without exception in order to prevent loss etc. in cases where data loss may result in loss or damage. Do not touch the top cover since application of force to it may cause damage to the drive.
Resumen del contenido incluido en la página 13
4. KEY FEATURES • High capacity in smallest size . 2.5inch-type 2 platters accommodating formatted capacity of 100.030GB(MK1032GAX) . Slim ( 9.5 mm in height ) and light ( MK1032GAX: 102gram in weight) design. • Fast access and fast transfer rate . Quick spin up of Spindle Motor 4 sec. . Average access time 12 msec enabled by optimized balance of a head actuator assembly and an efficiently designed magnet of rotary VCM. . Bus transfer rate up to 100 megabytes per second an
Resumen del contenido incluido en la página 14
5. BASIC SPECIFICATION MODEL MK1032GAX Formatted Capacity( gigabytes ) 100.030 Servo design method Sector Servo Recording method 60/61 ME2PR4+MNP Recording density Track / mm (TPI ) 4330(110k) Bit / mm ( BPI ) 29.8k(756k)max. Flux change / mm ( FRPI ) 30.3k(769k)max. Number of disks 2 Number of data heads 4 Number of user data cylinders 69,840 Bytes per sector 512 Toshiba Corporation Digital Media Network Company Page 14 of 159 © 2004, Copyright TOSHIBA Corporation All
Resumen del contenido incluido en la página 15
6. PERFORMANCE Access time ( msec ) <*1> Track to track seek <*2> 2 Average seek <*3> 12 Max. seek <*4> 22 Rotation speed ( RPM ) 5,400 + 0.1% Average Latency Time ( msec ) 7.14 Internal Transfer rate ( Mbits / sec ) 230.6 445.9 Host Transfer rate ( Mbytes / sec ) Ultra DMA mode 100 PIO mode 16.6 Sector Interleave 1:1 Track skew Yes Buffer size ( Kbytes ) 16,384 Cache Read Ahead Cache Write Cache Start time <*5> 4 sec ( Typical ) ( Up to Dri
Resumen del contenido incluido en la página 16
7. POWER REQUIREMENTS 7.1 Supply Voltage Allowable voltage 5V + 5% Allowable noise/ripple 100 mV p-p or less 7.2 Power Consumption Average (note 3) MK1032GAX Start 4.5W Peak,Maximum Seek (note 4) 2.4W Typical Read / Write(note 5) 2.0W Typical Active idle (note 1) 0.85W Typical Low power idle (note 6) 0.65W Typical Stand- by (note 2) 0.18W Typical Sleep 0.1W Typical (
Resumen del contenido incluido en la página 17
8. MECHANICAL SPECIFICATIONS 8.1 Dimension Width 69.85mm ( 2.75” ) Height 9.5 mm ( 0.37”) Depth 100.0 mm ( 3.94” ) Figure 1 and Table 8.4-1 show an outline of the drive. 8.2 Weight MK1032GAX 101 gram (typ. ) / 102 gram(max.) 8.3 Drive Orientation The drive can be installed in all axes (6 directions). 8.4 Mounting Instructions SAFETY NOTE Take anti-static measures in order to avoid damage to the drive when handling it. The drive uses parts susceptible to damage due to
Resumen del contenido incluido en la página 18
8.4.1 Screwing . . Four screws should be tightened equally with 0.39 N m ( 4 kgf cm ) torque. The depth should be 3.0 mm min. and 3.5 mm maximum. 8.4.2 Installation The drive should be mounted carefully on the surface of 0.1mm or less flatness to avoid excessive distortion. In order to prevent short-circuit under any circumstances, the space of 0.5mm or more should be kept under the PCB and the design have to be checked carefully (See fig. 2). Enough space should be kept around t
Resumen del contenido incluido en la página 19
Figure 1 MK1032GAX Dimensions Toshiba Corporation Digital Media Network Company Page 19 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved
Resumen del contenido incluido en la página 20
Table 8.4-1 Dimensions SFF-8200 Rev1.1(*) SFF-8201 Rev1.2 MK1032GAX SFF-8212 Rev1.2 (Differences only) Dimension Millimeters Inches Millimeters Inches A1 9.5 0.374 A2 0.20 0.008 A3 0.20 0.008 A4 69.85 2.750 A5 0.25 0.010 A6 101.85 max 4.010 max 100.00 ±0.41 3.973 ±0.016 A9 3.99 0.157 3.99 ±0.43 0.157 ±0.017 A10 10.14 0.399 10.14 ±0.27 0.399 ±0.011 A11 2.00 0.079 A12 2.00 0.079 A13 0.50 0.020 A14 0.05 0.002 A17 0.50 0.020 A18 0.05 0.002 A21
