Resumen del contenido incluido en la página 1
USB to Serial Adapter Hub
(ID-SC0511-S1/ID-SC0611-S1/ID-SC0711-S1/ID-SC0811-S1)
1
Resumen del contenido incluido en la página 2
Copyright Statement No part of this publication may be reproduced in any form by any means without the prior written permission. Other trademarks or brand names mentioned herein are trademarks or registered trademarks of their respective companies. Disclaimer Information in this document is subject to change without notice. The manufacturer does not make any representations or warranties (implied or otherwise) regarding the accuracy and completeness of this document and shall in no even
Resumen del contenido incluido en la página 3
1. Introduction USB-to-Serial converter provides an easy solution connection serial port as needed for systems. USB-to-Serial functions as a converter between a USB port and standard serial ports. We can easily connect this converter to the USB port on your PC or USB hub and get access to any RS-232 devices such as PDAs, scanners, printers, etc. This device is suitable for portable devices, equipments, sales-end applications. Features Compliant with USB 2.0 specification,Hi-Speed U
Resumen del contenido incluido en la página 4
System Requirement IBM compatible computer or Mac Windows 2000, Windows XP, Windows Vista 32/64-bit, Windows 7, Mac 10.x An available USB port 64 MB RAM or higher Pentium 233 MHz or higher 4
Resumen del contenido incluido en la página 5
2. Specifications 1xRS-232 (ID-SC0511-S1) 2xRS-232 (ID-SC0611-S1) Serial Ports 4xRS-232 (ID-SC0711-S1) 8xRS-232 (ID-SC0811-S1) DB9 male (ID-SC0511-S1/SC0311-S1/SC0411-S1) Connectors 8-pin RJ-45 (ID-SC0811-S1) FIFO Buffers 512 bytes ESD Protection 15 KV ESD Serial Communication Speed 50 b/s ~ 921.6Kb/s Interface USB 2.0 Interface Connector USB-B female Bus-Power (ID-SC0511-S1/SC0311-S1/SC0411-S1) Power Requirements 5V/3A DC (ID-SC0811-S1) Operation Temperature 0℃ to 55℃ Operatin
Resumen del contenido incluido en la página 6
USB to 1-port RS-232 Hub Hardware Dimension 100mm 6
Resumen del contenido incluido en la página 7
Hardware Introduction 7
Resumen del contenido incluido en la página 8
USB to 2-port RS-232 Hub Hardware Dimension 8
Resumen del contenido incluido en la página 9
Hardware Introduction 9
Resumen del contenido incluido en la página 10
USB to 4-port RS-232 Hub Hardware Dimension 10
Resumen del contenido incluido en la página 11
Hardware Introduction 11
Resumen del contenido incluido en la página 12
USB to 8-port RS-232 Hub Hardware Dimension 12
Resumen del contenido incluido en la página 13
Hardware Introduction RJ45 to RS-232 Cable (ID-SC0811-S1 only) 13
Resumen del contenido incluido en la página 14
RJ45 Pin Assignment 3. Installation On Windows 2000/ Windows XP/ Windows Vista / Windows 7 Note: DO NOT connect the Serial to USB Device to computer before installing the driver. 1. Please insert the provided CD into CD-ROM and click driver setup file to install. 14
Resumen del contenido incluido en la página 15
2. Please click “Finish” to process driver installation. When the installation completed, please connect the USB to Serial Converter to available USB port. 15
Resumen del contenido incluido en la página 16
Installation Verification To verify your installation, please launch Device Manager as following: Under Windows 2000/ Windows XP operating system: Right-Click My Computer and select Properties > System > (Hardware) > Device Manager. Under Windows Vista / Windows 7 operating system: Right-Click My Computer and select Properties > Device Manager The High-Speed USB Serial Port should be displayed under the Ports (COM & LPT) group. 16
Resumen del contenido incluido en la página 17
On Mac OS X Support Mac Driver Installation: Mac OS X v10.1 and later for PowerPC Mac Mac OS X v10.4 and later for Intel Mac Installation: 1. Insert the provided driver CD into your CD-ROM drive. Double-click the CD and navigate to the directory of \Driver\Mac\Mac_OS X 10.x\/MCS7840InstallDisk 10.4 zip. Please extract the zip file first. 2. Please click “Continue” to install driver. 17
Resumen del contenido incluido en la página 18
3. When the screen below appears, please choose the destination volume that you want to install and click Continue. 4. Please click “Install” to perform a basic installation. 18
Resumen del contenido incluido en la página 19
5. Please enter your password as prompted. 6. Please select Continue Installation to install the software when the screen below prompted. 7. Please click Restart to reboot the Mac. 19
Resumen del contenido incluido en la página 20
8. Please connect the device to available USB port to your Mac. 9. Installation Verification: Please key in “kextstat” to terminal bash. When above dialog box appears, it means the driver installation has been installed successfully. 20
