Resumen del contenido incluido en la página 1
Product Manual
SV35.5 Series SATA
ST31000525SV
ST3500410SV
ST3250311SV
100562053
Rev. A
March 2009
Resumen del contenido incluido en la página 2
Revision history Revision Date Sheets affected or comments Rev. A 03/06/09 Initial release. Copyright © 2009 Seagate Technology LLC. All rights reserved. Printed in U.S.A. Publication number: 100562053, Rev. A March 2009 Seagate, Seagate Technology and the Wave logo are registered trademarks of Seagate Technology LLC in the United States and/or other countries. SV35.5 Series, SeaTools and SeaTDD are either trademarks or registered trademarks of Seagate Technology LLC or one of its affiliated c
Resumen del contenido incluido en la página 3
Contents 1.0 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.1 About the Serial ATA interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2.0 Drive specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2.1 Specification summary tables . . . . . . . . . . . . . . .
Resumen del contenido incluido en la página 4
ii SV35.5 Series SATA Product Manual, Rev. A
Resumen del contenido incluido en la página 5
List of Figures Figure 1. Attaching SATA cabling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 Figure 2. Mounting dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 SV35.5 Series SATA Product Manual, Rev. A iii
Resumen del contenido incluido en la página 6
Resumen del contenido incluido en la página 7
1.0 Introduction This manual describes the functional, mechanical and interface specifications for the following Seagate TM SV35.5 Series model drive: ST31000525SV ST3500410SV ST3250311SV These drives provide the following key features: • Designed with low spin-up power for optimization in surveillance applications • Uncompromising reliability supports flexible surveillance design, with case temperatures up to 70º C • Performance-tuned for seamless video applications • Built-in error recovery
Resumen del contenido incluido en la página 8
1.1 About the Serial ATA interface The Serial ATA interface provides several advantages over the traditional (parallel) ATA interface. The primary advantages include: • Easy installation and configuration with true plug-and-play connectivity. It is not necessary to set any jump- ers or other configuration options. • Thinner and more flexible cabling for improved enclosure airflow and ease of installation. • Scalability to higher performance levels. In addition, Serial ATA makes the transition f
Resumen del contenido incluido en la página 9
2.0 Drive specifications Unless otherwise noted, all specifications are measured under ambient conditions, at 25°C, and nominal power. For convenience, the phrases the drive and this drive are used throughout this manual to indicate the following drive model: ST31000525SV ST3500410SV ST3250311SV 2.1 Specification summary tables The specifications listed in the following tables are for quick reference. For details on specification measure- ment or definition, see the appropriate section of thi
Resumen del contenido incluido en la página 10
Table 1: Drive specifications summary for 1 Tbyte models Drive specification ST31000525SV Formatted capacity (512 bytes/sector)* 1 Tbyte Guaranteed sectors 1,953,525,168 Heads 4 Discs 2 Bytes per sector 512 Default sectors per track 63 Default read/write heads 16 Default cylinders 16,383 Recording density 1,474 kbits/in max Track density 236 ktracks/in avg 2 Areal density 345 Gbits/in avg Internal data transfer rate 1,628 Mbits/sec max Sustained data transfer rate 140 Mbytes/sec max I/O data-tr
Resumen del contenido incluido en la página 11
Drive specification ST31000525SV Vibration, nonoperating 5-22 Hz: 2.0 Gs, Limited displacement 22-350 Hz: 5.0 Gs 350-500 Hz: 2.0 Gs Drive acoustics, sound power Idle** 2.7 bels (typical) 2.9 bels (max) Seek 2.8 bels (typical) 3.0 bels (max) 14 Nonrecoverable read errors 1 per 10 bits read Annualized Failure Rate (AFR) 0.80% Warranty To determine the warranty for a specific drive, use a web browser to access the following web page: www.seagate.com/support/service/ From this page,
Resumen del contenido incluido en la página 12
Table 2: Drive specifications summary for 500 and 250 Gbyte models Drive specification ST3500410SV ST3250311SV Formatted capacity (512 bytes/sector)* 500 Gbytes 250 Gbytes Guaranteed sectors 976,773,168 488,397,168 Heads 2 1 Discs 1 Bytes per sector 512 Default sectors per track 63 Default read/write heads 16 Default cylinders 16,383 Recording density 1,474 kbits/in max Track density 236 ktracks/in avg 2 Areal density 345 Gbits/in avg Internal data transfer rate 1,628 Mbits/sec max Sustained da
Resumen del contenido incluido en la página 13
Drive specification ST3500410SV ST3250311SV Vibration, nonoperating 5-22 Hz: 2.0 Gs, Limited displacement 22-350 Hz: 5.0 Gs 5-350 Hz: 5.0 Gs 350-500 Hz: 2.0 Gs 350-500 Hz: 1.0 Gs Drive acoustics, sound power Idle** 2.7 bels (typical) 2.5 bels (typical) 2.9 bels (max) 2.8 bels (max) Seek 2.8 bels (typical) 2.6 bels (typical) 3.0 bels (max) 2.8 bels (max) 14 Nonrecoverable read errors 1 per 10 bits read Annualized Failure Rate (AFR) 0.80% Warranty To determine the warranty for a spec
Resumen del contenido incluido en la página 14
2.2 Formatted capacity Formatted Guaranteed Model capacity* sectors Bytes per sector ST31000525SV 1 Tbyte 1,953,525,168 ST3500410SV 500 Gbytes 976,773,168 512 ST3250311SV 250 Gbytes 488,397,168 *One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting. 2.2.1 LBA mode When addressing the drive in LBA mode, all blocks (sectors) are consecutively numbered from 0 to n–1, where n is the number of gua
Resumen del contenido incluido en la página 15
2.5 Physical characteristics 1 TB model 500 GB model 250 GB model Maximum height 26.1 mm (1.028 inches) 20.20 mm (0.794 inches) Maximum width 101.85 mm (4.010 inches) Maximum length 146.99 mm (5.787 inches) Typical weight 677 grams (1.493 lb.) 544 grams (1.199 lb.) 380 grams (0.838 lb.) Cache buffer 16 Mbytes (16,384 kbytes) 8 Mbytes (8,192 kbytes) 2.6 Seek time Seek measurements are taken with nominal power at 25°C ambient temperature. All times are measured using drive diagnostics. The spec
Resumen del contenido incluido en la página 16
2.8 Power specifications The drive receives DC power (+5V or +12V) through a native SATA power connector. See Figure 1 on page 20. 2.8.1 Power consumption Power requirements for the drives are listed in the table on page 9. Typical power measurements are based on an average of drives tested, under nominal conditions, using 5.0V and 12.0V input voltage at 25°C ambient temperature. • Spinup power Spinup power is measured from the time of power-on to the time that the drive spindle reaches operat
Resumen del contenido incluido en la página 17
2.8.4 Power-management modes The drive provides programmable power management to provide greater energy efficiency. In most systems, you can control power management through the system setup program. The drive features the following power-management modes: Power modes Heads Spindle Buffer Active Tracking Rotating Enabled Idle Tracking Rotating Enabled Standby Parked Stopped Enabled Sleep Parked Stopped Disabled • Active mode The drive is in Active mode during the read/write and seek operation
Resumen del contenido incluido en la página 18
2.9 Environmental specifications 2.9.1 Drive case temperature Above 1,000 feet (305 meters), the maximum temperature is derated linearly to 112°F (44°C) at 10,000 feet (3,048 meters). Drive case temperature should be measured at the location indicated in Figure 2 on page 21. Operating (Drive case temperature) 0° to 70°C (32° to 158°F) Nonoperating (Drive case temperature) –40° to 70°C (–40° to 158°F) 2.9.2 Temperature gradient Operating: 20°C per hour (68°F per hour max), without condensati
Resumen del contenido incluido en la página 19
2.9.5 Shock All shock specifications assume that the drive is mounted securely with the input shock applied at the drive mounting screws. Shock may be applied in the X, Y or Z axis. 2.9.5.1 Operating shock The drives comply with the performance levels specified in this document when subjected to a maximum oper- ating shock of 63 Gs based on half-sine shock pulses of 2 msec. Shocks should not be repeated more than two times per second. 2.9.5.2 Nonoperating shock 2 disk models The nonoperating s
Resumen del contenido incluido en la página 20
2.10 Acoustics emissions Drive emission of sound is measured consistent with the ECMA-74 and its referenced standards. Testing is conducted at room temperature (approximately 25 degrees C). Emission levels are reported as the total A-weighted sound power levels for, steady state, idle and active (seek) modes of operations. Table 3: Drive A-weighted Sound Power Levels (SWL, BA) [1] Seek Idle 2.7 bels (typ) 2.8 bels (typ) 1000 and 500 GB model 2.9 bels (max) 3.0 bels (max) 2.5 bels (typ) 2.6 be
