Resumen del contenido incluido en la página 1
Product Manual
®
Pulsar XT.2 SAS
Standard Models Self-Encrypting Drive Models
ST400FX0002 ST400FX0012
ST200FX0002
ST100FX0002
100647497
Rev. B
June 2011
Resumen del contenido incluido en la página 2
Revision history Revision Date Sheets affected or comments Rev. A 03/16/11 Initial release. Rev. B 06/01/11 34. (7mm weight correction) © 2011 Seagate Technology LLC. All rights reserved. Publication number: 100647497, Rev. B June 2011 Seagate, Seagate Technology and the Wave logo are registered trademarks of Seagate Technology LLC in the United States and/or other countries. Pulsar and SeaTools are either trademarks or regis- tered trademarks of Seagate Technology LLC or one of its affiliated
Resumen del contenido incluido en la página 3
Contents 1.0 Seagate Technology support services. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2.0 Scope. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 3.0 Applicable standards and reference documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 3.1 Standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Resumen del contenido incluido en la página 4
6.3.7 Product warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 7.0 Physical/electrical specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 7.1 Power specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 7.1.1 Power consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Resumen del contenido incluido en la página 5
11.2 Dual port support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 11.3 SCSI commands supported. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 11.3.1 INQUIRY data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 11.3.2 MODE SENSE data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Resumen del contenido incluido en la página 6
iv Pulsar XT.2 SAS Product Manual, Rev. B
Resumen del contenido incluido en la página 7
List of Figures Figure 1. Current profiles for 400GB models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Figure 2. Current profiles for 200GB models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Figure 3. Current profiles for 100GB models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Figure 4. 400GB (at 6Gb) DC current and power vs. input/output operations
Resumen del contenido incluido en la página 8
Resumen del contenido incluido en la página 9
1.0 Seagate Technology support services SEAGATE ONLINE SUPPORT and SERVICES For information regarding products and services, visit http://www.seagate.com/www/en-us/about/contact_us/ Available services include: Presales & Technical support Global Support Services telephone numbers & business hours Authorized Service Centers For information regarding Warranty Support, visit http://www.seagate.com/www/en-us/support/warranty_&_returns_assistance For information regarding Data Recovery Services,
Resumen del contenido incluido en la página 10
2.0 Scope ® ® This manual describes Seagate Technology LLC, Pulsar XT.2 SAS (Serial Attached SCSI) drives. Pulsar XT.2 drives support the SAS Protocol specifications to the extent described in this manual. The SAS Interface Manual (part number 100293071) describes the general SAS characteristics of this and other Sea- gate SAS drives. The Self-Encrypting Drive Reference Manual, part number 100515636, describes the inter- face, general operation, and security features available on Self-Encryptin
Resumen del contenido incluido en la página 11
3.0 Applicable standards and reference documentation The drives documented in this manual have been developed as system peripherals to the highest standards of design and construction. The drives depend on host equipment to provide adequate power and environment for optimum performance and compliance with applicable industry and governmental regulations. Special attention must be given in the areas of safety, power distribution, shielding, audible noise control, and temper- ature regulation.
Resumen del contenido incluido en la página 12
3.1.2 Electromagnetic compliance Seagate uses an independent laboratory to confirm compliance with the directives/standards for CE Marking and C-Tick Marking. The drive was tested in a representative system for typical applications. The selected sys- tem represents the most popular characteristics for test platforms. The system configurations include: • Typical current use microprocessor • Keyboard • Monitor/display • Printer •Mouse Although the test system with this Seagate model complies with
Resumen del contenido incluido en la página 13
3.1.4 China Restriction of Hazardous Substances (RoHS) Directive This product has an Environmental Protection Use Period (EPUP) of 20 years. The following table contains information mandated by China's "Marking Requirements for Control of Pollution Caused by Electronic Information Products" Standard. "O" indicates the hazardous and toxic substance content of the part (at the homogenous material level) is lower than the threshold defined by the China RoHS MCV Standard. "X" indicates the hazard
Resumen del contenido incluido en la página 14
4.0 General description Pulsar XT.2 drives provide high performance, high capacity data storage for a variety of systems with a Serial Attached SCSI (SAS) interface. The Serial Attached SCSI interface is designed to meet next-generation com- puting demands for performance, scalability, flexibility and high-density storage requirements. Pulsar XT.2 drives are random access storage devices designed to support the Serial Attached SCSI Protocol as described in the ANSI specifications, this documen
Resumen del contenido incluido en la página 15
• Automatic data encryption/decryption • Controlled access • Random number generator • Drive locking • 16 independent data bands • Cryptographic erase of user data for a drive that will be repurposed or scrapped • Authenticated firmware download 4.2 Media description The media used on the drive consists of Single Layer Cell (SLC) NAND Flash for improved reliability and per- formance. 4.3 Performance • Programmable multi-segmentable cache buffer • 600MB/s maximum instantaneous data transfers. •
Resumen del contenido incluido en la página 16
4.5 Formatted capacities Standard OEM models are formatted to 512 bytes per block. The block size is selectable at format time and must be a multiple of 4 bytes. Users having the necessary equipment may modify the data block size before issuing a FORMAT UNIT command and obtain different formatted capacities than those listed. To provide a stable target capacity environment and at the same time provide users with flexibility if they choose, Seagate recommends product planning in one of two mod
Resumen del contenido incluido en la página 17
4.8 Thin Provisioning 4.8.1 Logical Block Provisioning The drive is designed with a feature called Thin Provisioning. Thin Provisioning is a technique which does not require Logical Blocks to be associated to Physical Blocks on the storage medium until such a time as needed. The use of Thin Provisioning is a major factor in SSD products because it reduces the amount of wear leveling and garbage collection that must be performed. The result is an increase in the products endurance. For mor
Resumen del contenido incluido en la página 18
When a region of LBA's are erased via cryptographic erase, as part of the erase, the drive shall unmap those LBAs. If the host attempts to access an unmapped or trimmed LBA, the drive shall return scrambled data. For a given LBA, the data shall be identical from access to access, until that LBA is either updated with actual data from the host or that LBA is cryptographically erased. The drive shall report a value of '0' in the LBPRZ field returned in the READ CAPACITY (16) parameter data. If
Resumen del contenido incluido en la página 19
5.0 Performance characteristics This section provides detailed information concerning performance-related characteristics and features of Pul- sar XT.2 drives. Note. Data provided is based on format at 512-bytes. 5.1 Internal drive characteristics ST400FX0002 ST200FX0002 ST100FX0002 ST400FX0012 Drive capacity 400 200 100 GB (formatted, rounded off value) Flash Memory Type NAND SLC Emulated LBA Size 512, 520, 524, 528, 4096, 4160, 4192, or 4224 Native Programmable Page Size 4096 User Bytes Defa
Resumen del contenido incluido en la página 20
5.2.2 FORMAT UNIT command execution time for 512-byte LBA’s (minutes) The device may be formatted as either a Thin Provisioned device or a Fully Provisioned device. The default format is Thin Provisioned and is recommended for most applications. Thin Provisioning provides the most flexibility for the device to manage the flash medium to maximize endurance. Table 5: Maximum FORMAT UNIT Times (minutes) Format Mode DCRT Bit IP Bit 400GB 200GB 100GB Configuration Non-SED (Default) Thin Provisioned
