Resumen del contenido incluido en la página 1
Product Manual
Pipeline HD Mini Series SATA
ST9500323CS ST9250311CS
ST9320328CS ST91603110CS
100560196
Rev. E
December 2010
Resumen del contenido incluido en la página 2
Revision history Revision Date Sheets affected or comments Rev. A 03/26/09 Initial release. Rev. B 04/15/09 4 and 8. Rev. C 05/01/09 fc, 1, 3-6, 13, 15 and 289-30. Rev. D 05/12/09 4 & 8. Rev. E 12/15/10 Updated AFR information; added section 2.13.1. Copyright © 2010 Seagate Technology LLC. All rights reserved. Printed in U.S.A. Publication number: 100560196, Rev. E December 2010 Seagate, Seagate Technology and the Wave logo are registered trademarks of Seagate Technology LLC in the United Stat
Resumen del contenido incluido en la página 3
Pipeline HD Mini Series SATA Product Manual, Rev. E i
Resumen del contenido incluido en la página 4
ii Pipeline HD Mini Series SATA Product Manual, Rev. E
Resumen del contenido incluido en la página 5
Contents 1.0 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.1 About the Serial ATA interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2.0 Drive specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2.1 Specification summary table . . . . . . . . . . . . . . . .
Resumen del contenido incluido en la página 6
iv Pipeline HD Mini Series SATA Product Manual, Rev. E
Resumen del contenido incluido en la página 7
List of Figures Figure 1. Typical +5V only startup and operation current profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Figure 2. Attaching SATA cabling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Figure 3. Mounting dimensions—top, side and end view. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Pipeline HD Mini Series SATA Product Manual, Rev. E v
Resumen del contenido incluido en la página 8
Resumen del contenido incluido en la página 9
Seagate Technology Support Services For information regarding online support and services, visit http://www.seagate.com/www/en-us/about/contact_us/ Available services include: • Presales & Technical support • Global Support Services telephone numbers & business hours • Authorized Service Centers For information regarding Warranty Support, visit http://www.seagate.com/www/en-us/support/warranty_&_returns_assistance For information regarding data recovery services, visit http://www.i365.com For
Resumen del contenido incluido en la página 10
viii Pipeline HD Mini SATA Product Manual, Rev. E
Resumen del contenido incluido en la página 11
1.0 Introduction This manual describes the functional, mechanical and interface specifications for the following Seagate ® Pipeline HD Mini Series SATA model drives: • ST9500323CS • ST9320328CS • ST9250311CS • ST91603110CS These drives provide the following key features: • 5,400-RPM spindle speed. • 8-Mbyte buffer. • Quiet operation. Fluid Dynamic Bearing (FDB) motor. • High instantaneous (burst) data rate 3.0 Gbits/sec default, 1.5 Gbit/sec available via Seagate specific SCT com- mand. • Perpe
Resumen del contenido incluido en la página 12
In addition, Serial ATA makes the transition from parallel ATA easy by providing legacy software support. Serial ATA was designed to allow you to install a Serial ATA host adapter and Serial ATA disc drive in your current sys- tem and expect all of your existing applications to work as normal. The Serial ATA interface connects each disc drive in a point-to-point configuration with the Serial ATA host adapter. There is no master/slave relationship with Serial ATA devices like there is with para
Resumen del contenido incluido en la página 13
2.0 Drive specifications Unless otherwise noted, all specifications are measured under ambient conditions, at 25°C, and nominal power. For convenience, the phrases the drive and this drive are used throughout this manual to indicate the Pipeline HD Mini Series SATA models. 2.1 Specification summary table The specifications listed in this table are for quick reference. For details on specification measurement or definition, see the appropriate section of this manual. Table 1: Drive specificati
Resumen del contenido incluido en la página 14
Table 1: Drive specifications Drive specification ST9500323CS ST9320328CS ST9250311CS ST91603110CS IDEMA 3 Stream power (typical) 1.7 watts 1.6 watts Idle mode, low power (typical) 0.72 watts 0.67 watts Standby mode 0.40 watts (typical)*** Sleep mode 0.40 watts (typical)*** Voltage tolerance (including noise) +5V ± 5% Baseplate temperature 0° to 70°C (operating), –40° to 70°C (nonoperating) Temperature gradient 20°C (operating) (°C per hour max) 35°C (nonoperating) Relative humidity 5% to 95%
Resumen del contenido incluido en la página 15
2.2 Formatted capacity Model Formatted capacity* Guaranteed sectors Bytes per sector ST9500323CS 500 Gbytes 976,773,168 ST9320328CS 320 Gbytes 625,142,448 512 ST9250311CS 250 Gbytes 488,397,168 ST91603110CS 160 Gbytes 312,581,808 *One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting. 2.2.1 LBA mode When addressing these drives in LBA mode, all blocks (sectors) are consecutively numbered from 0
Resumen del contenido incluido en la página 16
2.4 Physical organization Drive model Read/write heads Number of discs ST9500323CS 4 2 ST9320328CS 3 ST9250311CS 2 1 ST91603110CS 2.5 Recording and interface technology Interface Serial ATA (SATA) Recording method Perpendicular Recording density BPI (bits/inch avg) 1,490k Track density TPI (tracks/inch avg) 265k 2 Areal density (Gbits/inch avg) 394 Spindle speed (RPM) (± 0.2%) 5,400 Maximum Internal transfer rate (Mbits/sec) 1,175 I/O data-transfer rate (Mbytes/sec max) 300 default / 150 avail
Resumen del contenido incluido en la página 17
Table 2: Typical seek times Track-to-track (typical) 1 Average (typical) 14 Full-stroke (max) 30 Average latency 5.56 Note. These drives are designed to consistently meet the seek times represented in this manual. Physical seeks, regardless of mode (such as track-to-track and average), are expected to meet the noted val- ues. However, due to the manner in which these drives are formatted, benchmark tests that include command overhead or measure logical seeks may produce results that vary from
Resumen del contenido incluido en la página 18
During Standby mode, the drive accepts commands, but the drive is not spinning, and the servo and read/write electronics are in power-down model Table 3: DC power +5V input average (25° C) Power dissipation ST9500323CS and ST9320328CS ST9250311CS and ST91603110CS Spinup (max) 1 amp Seek 1.54 watts IDEMA 3 Stream 1.7 watts 1.6 watts Idle, performance* 1.5 watts Idle, active* 0.90 watts 0.81 watts Idle, low power mode* 0.72 watts 0.67 watts Standby** 0.40 watts Sleep 0.40 watts *During periods of
Resumen del contenido incluido en la página 19
2.9.2 Conducted noise Input noise ripple is measured at the host system power supply across an equivalent 15-ohm resistive load on the +5 volt line. Using 5-volt power, the drive is expected to operate with a maximum of 100 mV peak-to-peak square-wave injected noise at up to 10 MHz. Note. Equivalent resistance is calculated by dividing the nominal voltage by the typical RMS read/write cur- rent. 2.9.3 Voltage tolerance Voltage tolerance (including noise): 5V ± 5% 2.9.4 Power-management modes T
Resumen del contenido incluido en la página 20
• Idle and Standby timers Each time the drive performs an Active function (read, write or seek), the standby timer is reinitialized and begins counting down from its specified delay times to zero. If the standby timer reaches zero before any drive activity is required, the drive makes a transition to Standby mode. In both Idle and Standby mode, the drive accepts all commands and returns to Active mode when disc access is necessary. 2.10 Environmental specifications 2.10.1 Base plate temperatu