Resumen del contenido incluido en la página 1
Product Manual
Momentus 5400.6 SATA
ST9500325AS ST9500325ASG
ST9400326AS ST9320325ASG
ST9320325AS ST9250315ASG
ST9250315AS ST9160314ASG
ST9160314AS ST9120315ASG
ST9160301AS ST980313ASG
ST9120315AS
ST980313AS
100528359
Rev. E
September 2009
Resumen del contenido incluido en la página 2
Copyright © 2009 Seagate Technology LLC. All rights reserved. Printed in U.S.A. Publication number: 100528359, Rev. E, September 2009 Seagate, Seagate Technology and the Wave logo are registered trademarks of Seagate Technology LLC in the United States and/or other countries. Momentus, SeaTools and SeaTDD are either trademarks or registered trademarks of Seagate Technology LLC or one of its affiliated companies in the United States and/or other countries. All other trademarks or registered tr
Resumen del contenido incluido en la página 3
Contents 1.0 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.1 About the Serial ATA interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2.0 Drive specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2.1 Specification summary table . . . . . . . . . . . . . . . .
Resumen del contenido incluido en la página 4
ii Momentus 5400.6 SATA Product Manual, Rev. E
Resumen del contenido incluido en la página 5
List of Figures Figure 1. Typical +5V only startup and operation current profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Figure 2. Serial ATA connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Figure 3. Attaching SATA cabling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Figure 4. Mounting dimensions—top, side and end view . . . . . . . . .
Resumen del contenido incluido en la página 6
Resumen del contenido incluido en la página 7
1.0 Introduction This manual describes the functional, mechanical and interface specifications for the following Seagate ® Momentus 5400.6 SATA model drives: • ST9500325AS • ST9500325ASG • ST9400326AS • • ST9320325AS • ST9320325ASG • ST9250315AS • ST9250315ASG • ST9160314AS • ST9160314ASG • ST9160301AS • ST9120315AS • ST9120315ASG • ST980313AS • ST980313ASG These drives provide the following key features: • 5,400-RPM spindle speed. • 8-Mbyte buffer. • Free Fall Protection (on ST9500325ASG, ST93
Resumen del contenido incluido en la página 8
1.1 About the Serial ATA interface The Serial ATA interface provides several advantages over the traditional (parallel) ATA interface. The primary advantages include: • Easy installation and configuration with true plug-and-play connectivity. It is not normally necessary to set any jumpers or other configuration options. • Thinner and more flexible cabling for improved enclosure airflow and ease of installation. • Scalability to higher performance levels. In addition, Serial ATA makes the tran
Resumen del contenido incluido en la página 9
2.0 Drive specifications Unless otherwise noted, all specifications are measured under ambient conditions, at 25°C, and nominal power. For convenience, the phrases the drive and this drive are used throughout this manual to indicate the Momentus 5400.6 SATA models. 2.1 Specification summary table The specifications listed in this table are for quick reference. For details on specification measurement or defi- nition, see the appropriate section of this manual. . Table 1: Drive specifications
Resumen del contenido incluido en la página 10
Table 1: Drive specifications for 500, 400 and 320 GB models ST9500325AS ST9320325AS Drive specification ST9500325ASG ST9400326AS ST9320325ASG Average seek, read (msec typical) 14 Full-stroke seek, read (msec max) 30 Startup current, +5V (max) 1 amp Seek power (typical) 1.54 watts Read/write power (typical) Read: 1.40 watts; Write: 1.78 watts Idle mode, low power (typical) 0.67 watts Standby mode 0.20 watts (typical)*** Sleep mode 0.20 watts (typical)*** Voltage tolerance (including noise) +5V
Resumen del contenido incluido en la página 11
Table 2: Drive specifications for 250 and 160 GB models ST9250315AS ST9160314AS Drive specification ST9250315ASG ST9160314ASG ST9160301AS Formatted Gbytes (512 bytes/sector)* 250 160 Guaranteed sectors 488,397,168 312,581,808 Bytes per sector 512 Physical read/write heads 2 Discs 1 Cache (Mbytes) 8 Recording density in BPI (bits/inch avg) 1,490k 1,238k Track density TPI (tracks/inch avg) 265k 210k 2 Areal density (Gbits/inch avg) 394 269 Spindle speed (RPM) 5,400 Average latency (msec) 5.6 I
Resumen del contenido incluido en la página 12
Table 2: Drive specifications for 250 and 160 GB models ST9250315AS ST9160314AS Drive specification ST9250315ASG ST9160314ASG ST9160301AS Altitude, nonoperating –304.8 m to 12,192 m (–1000 ft to 40,000+ ft) (meters below mean sea level, max) Shock, operating (Gs max at 2 msec) 350 Shock, nonoperating (Gs max at 2 msec) 800 Shock, nonoperating (Gs max at 1 msec) 1,000 Shock, nonoperating (Gs max at 0.5 msec) 600 Vibration, operating 1.0 G (0 to peak, 5–500 Hz) Vibration, nonoperating 5.0 Gs (0
Resumen del contenido incluido en la página 13
Table 3: Drive specifications for 120 and 80 GB models ST9120315AS ST980313AS Drive specification ST9120315ASG ST980313ASG Formatted Gbytes (512 bytes/sector)* 120 80 Guaranteed sectors 234,441,648 156,301,488 Bytes per sector 512 Physical read/write heads 1 Discs 1 Cache (Mbytes) 8 Recording density in BPI (bits/inch avg) 1,490k Track density TPI (tracks/inch avg) 265k 2 Areal density (Gbits/inch avg) 394 Spindle speed (RPM) 5,400 Average latency (msec) 5.6 Internal transfer rate (Mbits/sec m
Resumen del contenido incluido en la página 14
Table 3: Drive specifications for 120 and 80 GB models ST9120315AS ST980313AS Drive specification ST9120315ASG ST980313ASG Shock, operating (Gs max at 2 msec) 350 Shock, nonoperating (Gs max at 2 msec) 800 Shock, nonoperating (Gs max at 1 msec) 1,000 Shock, nonoperating (Gs max at 0.5 msec) 600 Vibration, operating 1.0 G (0 to peak, 5–500 Hz) Vibration, nonoperating 5.0 Gs (0 to peak, 5–500 Hz) Drive acoustics, sound power (bels) Idle** 2.4 (typical) 2.6 (max) Performance seek 2.5 (typi
Resumen del contenido incluido en la página 15
2.2.1 LBA mode When addressing these drives in LBA mode, all blocks (sectors) are consecutively numbered from 0 to n–1, where n is the number of guaranteed sectors as defined above. See Section 4.3.1, "Identify Device command" (words 60-61 and 100-103) for additional information about 48- bit addressing support of drives with capacities over 137 Gbytes. 2.3 Default logical geometry Cylinders Read/write heads Sectors per track 16,383 16 63 LBA mode When addressing these drives in LBA mode, a
Resumen del contenido incluido en la página 16
2.6 Physical characteristics Drive specification Height (mm) 9.5 +/-0.2 (inches) 0.374 +/-0.0079 Width (mm) 69.85 +/-0.25 (inches) 2.75 +/-0.0098 Length (mm) 100.35 +0.20 / -0.25 (inches) 3.957 +0.0079 / -0.0098 Weight (max) ST9500325AS 98.8 grams ST9500325ASG 0.218 pounds ST9400326AS ST9320325AS ST9320325ASG ST9250315AS 93.5 grams ST9250315ASG 0.206 pounds ST9160314AS ST9160314ASG ST9120315AS ST9120315ASG ST980313AS ST980313ASG ST9160301AS 105 grams 0.23 po
Resumen del contenido incluido en la página 17
2.9 Power specifications The drive receives DC power (+5V) through a native SATA power connector. 2.9.1 Power consumption Power requirements for the drives are listed in the table on page 11. Typical power measurements are based on an average of drives tested, under nominal conditions, at 25°C ambient temperature. • Spinup power Spinup power is measured from the time of power-on to the time that the drive spindle reaches operating speed. • Seek mode During seek mode, the read/write actuator arm
Resumen del contenido incluido en la página 18
2.9.1.1 Typical current profile Figure 1. Typical +5V only startup and operation current profile 2.9.2 Deferred spinup Momentus 5400.6 SATA drives do not support the deferred spinup option. If you require this option, refer to the Momentus 5400.3 SATA Blade Server family of drives. 2.9.3 Conducted noise Input noise ripple is measured at the host system power supply across an equivalent 15-ohm resistive load on the +5 volt line. Using 5-volt power, the drive is expected to operate with a maximu
Resumen del contenido incluido en la página 19
2.9.5 Power-management modes The drive provides programmable power management to provide greater energy efficiency. In most systems, you can control power management through the system setup program. The drive features the following power-management modes: Table 6: Power management modes Power modes Heads Spindle Buffer Active (operating) Tracking Rotating Full power Idle, performance Tracking Rotating Self refresh—low power Idle, active Floating Rotating Self refresh—low power Idle, low power
Resumen del contenido incluido en la página 20
2.10 Environmental specifications 2.10.1 Ambient temperature Ambient temperature is defined as the temperature of the environment immediately surrounding the drive. Actual drive case temperature should not exceed 70°C (158°F) within the operating ambient conditions. Above 1,000 feet (305 meters), the maximum temperature is derated linearly by 1°C every 1000 feet. Operating: 0° to 60°C (32° to 140°F) Nonoperating: –40° to 70°C (–40° to 158°F) 2.10.2 Temperature gradient Operating 20°C per hour
