Resumen del contenido incluido en la página 1
PRODUCT MANUAL
®
Momentus 5400.3 PSD SATA
ST91608220AS
ST91208220AS
ST91008220AS
ST9808212AS
ST9608210AS
100454328
Rev. A
April 2007
Resumen del contenido incluido en la página 2
©2007, Seagate Technology LLC All rights reserved. Publication number: 100454328, Rev. A April 2007 Seagate, Seagate Technology and the Wave logo are registered trademarks of Seagate Technology LLC in the United States and/or other countries. Momentus, SeaTools and SeaTDD are either trademarks or registered trademarks of Seagate Technology LLC or one of its affiliated companies in the United States and/or other countries. All other trademarks or registered trademarks are the property of the
Resumen del contenido incluido en la página 3
Revision status summary sheet Revision Date Notes Rev. A 04/13/07 Initial release. Momentus 5400.3 PSD SATA Product Manual, Rev. A i
Resumen del contenido incluido en la página 4
ii Momentus 5400.3 PSD SATA Product Manual, Rev. A
Resumen del contenido incluido en la página 5
Contents 1.0 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.1 About the Serial ATA interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 1.2 Non-volatile cache (NVC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2.0 Drive specifications . . . . . . . . . . . . . . . . . . . . . . . . . . .
Resumen del contenido incluido en la página 6
iv Momentus 5400.3 PSD SATA Product Manual, Rev. A
Resumen del contenido incluido en la página 7
List of Figures Figure 1. Typical +5V only startup and operation current profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Figure 2. Serial ATA connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Figure 3. Attaching SATA cabling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Figure 4. Mounting dimensions—top, side and end view . . . . . . . . .
Resumen del contenido incluido en la página 8
Resumen del contenido incluido en la página 9
1.0 Introduction This manual describes the functional, mechanical and interface specifications for the following Seagate ® Momentus 5400.3 PSD SATA model drives: � ST91608220AS � ST91208220AS � ST91008220AS � ST9808212AS � ST9608210AS These drives provide the following key features: � 5,400-RPM spindle speed. � 8-Mbyte buffer (SDRAM). � 256-Mbyte Non-volatile cache. � Quiet operation. Fluid Dynamic Bearing (FDB) motor. � High instantaneous (burst) data-transfer rates (up to 150 Mbytes per secon
Resumen del contenido incluido en la página 10
1.1 About the Serial ATA interface The Serial ATA interface provides several advantages over the traditional (parallel) ATA interface. The primary advantages include: � Easy installation and configuration with true plug-and-play connectivity. It is not normally necessary to set any jumpers or other configuration options. � Thinner and more flexible cabling for improved enclosure airflow and ease of installation. � Scalability to higher performance levels. In addition, Serial ATA makes the tran
Resumen del contenido incluido en la página 11
Provide power savings and battery life NVC decreases power consumption by reducing the amount of time the discs are spinning in the HDA. Improve reliability Shock and vibration impacts during writes is negligible when writing to NVC memory. This results in an overall Annualized Failure Rate (AFR) of less than 0.50%. Reduced acoustics Reads and writes from NVC memory may occur without the acoustic impact of spinning media and actuator movement. Momentus 5400.3 PSD SATA Product Manual, Rev. A 3
Resumen del contenido incluido en la página 12
4 Momentus 5400.3 PSD SATA Product Manual, Rev. A
Resumen del contenido incluido en la página 13
2.0 Drive specifications Unless otherwise noted, all specifications are measured under ambient conditions, at 25°C, and nominal power. For convenience, the phrases the drive and this drive are used throughout this manual to refer to the various models. 2.1 Specification summary table The specifications listed in this table are for quick reference. For details on specification measurement or defi- nition, see the appropriate section of this manual. Table 1: Drive specifications summary Dri
Resumen del contenido incluido en la página 14
Table 1: Drive specifications summary Drive specification ST91608220AS ST91208220AS ST91008220AS ST9808212AS ST9608210AS Full-stroke seek (msec) 22 (typical); 24 (max) Startup current, +5V (typical) 1.0 amps Seek power (typical) 2.0 watts Read/write power (typical) Read: 1.9 watts; Write: 1.8 watts Idle mode, low power (typical) 0.6 watts Standby mode 0.2 watts (typical)*** Sleep mode 0.2 watts (typical)*** Voltage tolerance (including noise) +5V ± 5% Ambient temperature 0° to 60°C (operating),
Resumen del contenido incluido en la página 15
**During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power to operational levels. ***Typical notebooks will pull power to the drive when entering S3 and S4; while in the S3 and S4 states, drive sleep and drive standby modes will not contribute to battery power consumption. 2.2 Formatted capacity Model Formatted capacity* Guaranteed sectors Bytes per sector ST91608220AS 160 Gbytes 312,581,808 512 ST9120822
Resumen del contenido incluido en la página 16
2.4 Physical organization Read/write Number SDRAM Non-volatile Drive model heads of discs buffer size cache size ST91608220AS 4 2 8 MB 256 MB ST91208220AS 3 2 8 MB 256 MB ST91008220AS 3 2 8 MB 256 MB ST9808212AS 2 1 8 MB 256 MB ST9608210AS 2 1 8 MB 256 MB 2.5 Recording and interface technology Interface Serial ATA (SATA) Recording method Perpendicular Recording density BPI (bits/inch max) 870k Track density TPI (tracks/inch max) 150k 2 Areal density (Gbits/inch max) 132 Spindle speed (RPM) (
Resumen del contenido incluido en la página 17
2.7 Seek time Seek measurements are taken with nominal power at 25°C ambient temperature. All times are measured using drive diagnostics. The specifications in the table below are defined as follows: � Track-to-track seek time is an average of all possible single-track seeks in both directions. � Average seek time is a true statistical random average of at least 5,000 measurements of seeks between random tracks, less overhead. Table 2: Typical seek times Typical seek times (msec) Read Write T
Resumen del contenido incluido en la página 18
2.9 Power specifications The drive receives DC power (+5V) through a native SATA power connector. 2.9.1 Power consumption Power requirements for the drives are listed in the table on page 10. Typical power measurements are based on an average of drives tested, under nominal conditions, at 25°C ambient temperature. • Spinup power Spinup power is measured from the time of power-on to the time that the drive spindle reaches operating speed. � Seek mode During seek mode, the read/write actuator arm
Resumen del contenido incluido en la página 19
2.9.1.1 Typical current profile Figure 1. Typical +5V only startup and operation current profile 2.9.2 Deferred spinup Momentus 5400.3 PSD SATA drives do not support the deferred spinup option. If you require this option, refer to the Momentus 5400.3 SATA Blade Server family of drives. 2.9.3 Conducted noise Input noise ripple is measured at the host system power supply across an equivalent 15-ohm resistive load on the +5 volt line. Using 5-volt power, the drive is expected to operate with a m
Resumen del contenido incluido en la página 20
2.9.5 Power-management modes The drive provides programmable power management to provide greater energy efficiency. In most systems, you can control power management through the system setup program. The drive features the following power-management modes: Table 4: Power management modes Power modes Heads Spindle Buffer Active (operating) Tracking Rotating Full power Idle, performance Tracking Rotating Self refresh—low power Idle, active Floating Rotating Self refresh—low power Idle, low power
