Resumen del contenido incluido en la página 1
ENGLISH ESPAÑOL
PORTABLE TYPE
ROOM AIR CONDITIONER
INSTALLATION AND OPERATION
MANUAL
ACONDICIONADOR DE AIRE
PARA HABITACIÓN TIPO
PORTÁTIL
MANUAL DE INSTALACIÓN
Y FUNCIONAMIENTO
CV-2P10SC
This product can also be used as an ion
generator
Device of this mark is a trademark of Sharp
Corporation.
Plasmacluster is a registered trademark or a
trademark of Sharp Corporation.
Resumen del contenido incluido en la página 2
Resumen del contenido incluido en la página 3
ENGLISH ENGLISH Please read this manual carefully before using the product. This manual should be kept in a safe place for handy reference. CONTENTS • FOR CUSTOMER ASSISTANCE ........................................................ EN-2 • CONSUMER LIMITED WARRANTY ................................................... EN-3 • PRECAUTIONS .................................................................................. EN-4 • LOCATION ........................................................
Resumen del contenido incluido en la página 4
FOR CUSTOMER ASSISTANCE (the United States) To aid in answering questions if you call for service or for reporting loss or theft, please record below the model and serial number located on the back side of the unit. MODEL NUMBER SERIAL NUMBER DATE OF PURCHASE Dealer Name Address City State Zip Telephone TO PHONE: Dial 1-800-BE-SHARP (237-4277) for: SERVICE (for your nearest Sharp Authorized Servicer) PARTS (for your Authorized Parts Distributor) ACCESSORIES ADDITIONAL CUSTOMER INF
Resumen del contenido incluido en la página 5
ENGLISH CONSUMER LIMITED WARRANTY CONSUMER LIMITED WARRANTY FOR THE U.S. USERS SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the “Product”), when shipped in its original container, will be free from defective workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser for parts or labor
Resumen del contenido incluido en la página 6
PRECAUTIONS Points to keep in mind when using your unit. WARNINGS FOR USE • Install the unit in accordance with the installation instructions in the latter section of this manual. • Do not modify any part of this product. • Do not insert anything into any part of the unit. • Ensure the power supply used has an appropriate voltage rating. Only use a three-pin grounded electrical AC socket rated 125V, 60Hz, and 15 amps or more. Use of a power supply with an improper voltage rating can resu
Resumen del contenido incluido en la página 7
ENGLISH WARNING ABOUT GROUNDING • Improper use of the grounding plug can 3-Pin socket result in the risk of electric shock. This appliance must be grounded. In the event of an electrical short circuit, ground- Grounding pin ing reduces the risk of an electric shock by providing a less resistant conduit for the 3-Pin plug electric current. This appliance is equipped with a cord that has a grounding wire connected to a grounding plug. The plug must be plugged into a socket that is prope
Resumen del contenido incluido en la página 8
PRECAUTIONS NOTES ON OPERATION • Allow 3 minutes for the compressor to restart cooling. If you turn the unit off and immediately restart it, allow three minutes for the compressor to restart cooling. There is an electronic device in the unit that keeps the compressor turned off for three minutes for safety. • In the event of a power failure during use, allow 3 minutes before restarting the unit. After power is reinstated, restart the unit. If the power was off for less than three min- u
Resumen del contenido incluido en la página 9
ENGLISH LOCATION • The unit should be placed on a firm foundation to MIN.12" minimize noise and vibration. For safe and secure (30cm) positioning, place the unit on a smooth, level floor strong enough to support the unit. This will also help to avoid water spilling out into the room. • The unit has casters to aid placement, but it should only be rolled on smooth, flat surfaces. Use caution when rolling on carpet surfaces. Do not attempt to roll the unit over objects. • The unit must
Resumen del contenido incluido en la página 10
PART NAMES FRONT VIEW 1 1 Air Outlet 2 2 Vertical louvers 3 3 Horizontal louvers 4 4 POWER Button 5 5 Receiver window (for remote control) 6 6 AIR CON Lamp (green) 7 7 TIMER Lamp (orange) 8 8 MAXIMUM Lamp (red) 9 9 ION GENERATOR Lamp 10 (blue) 10 10 Air inlet 10 REAR VIEW 11 1 1 Exhaust air outlet 12 1 2 Window adapter 13 Exhaust hose 13 1 4 Remote control hook 14 1 5 A i r fi l t e r 15 16 Grill 17 Air inlet 1 8 Drainpipe and stopcock 16 1 9 Power plug 17
Resumen del contenido incluido en la página 11
ENGLISH REMOTE CONTROL 1 1 Tramsmitter 2 Display AIR CON MODE ONLY 3 A/C Button 4 TEMP Button 5 MAX COOL Button 2 6 MODE Button 7 SLEEP Button 8 ON TIMER Button 12 ION MODE ONLY 9 3 9 ION Button 10 MAX DENSITY Button 4 10 11 REFRESH Button 5 11 6 COMMON 12 OFF Button 7 13 13 FAN Button 14 14 LOUVERS Button 8 15 CANCEL Button 15 16 OFF TIMER Button 16 17 RESET Button 17 18 MODE Symbols : COOL : DEHUMIDIFICATION : FAN : VENTILATION 19 REFRESH Symbol REMOTE CONTROL D
Resumen del contenido incluido en la página 12
INSTALL WINDOW PANEL Installation in a double-hung sash window Hole Insect guard net Rain guard Connect the rain guards to the insect 1 guard net. Insert all three projections on each rain guard into the holes in the insect guard net. Side “A” will now be at the top, as indicated in the diagram. Projec- "A" tion Attach the guard combined above to Projection 2 the window pane l. "A" Window panel Push the insect guard net firmly to ensure that its four projections fit into the holes in
Resumen del contenido incluido en la página 13
ENGLISH Adjustment panel Inner width of the window: 28.3" (718mm) - 45.3" (1150mm) Use the window panel and the adjustment panel. (1) Open the window sash and place the window panel on the window sill. (2) Slide the adjustment panel to fit the win- dow frame width. (3) Secure the window panel to the sill with 3 screws. 28.3"-45.3" Inner width of the window: 45.3" (1150mm) - 70.9" (1800mm) Use the window panel, the adjustment panel and the extension panel. Extension panel Adjustment panel
Resumen del contenido incluido en la página 14
INSTALL WINDOW PANEL Installation in a sliding sash window "A" Connect the rain guards to the insect 1 guard net. Insert all three projections on each rain guard into the holes in the insect guard net. Insect guard net Side “A” will now be at the top, as indicated in the diagram. Hole Projection Attach the guard combined above to 2 the window panel. Rain guard Push the insect guard net firmly to ensure that its four projections fit into the holes in the window panel. Window panel S
Resumen del contenido incluido en la página 15
ENGLISH Adjustment panel Inner height of the window: 28.3" (718mm) - 45.3" (1150mm) Use the window panel and the adjustment panel. (1) Open the window sash and place the window panel on the window frame. (2) Slide the adjustment panel to fit the 28.3"- 45.3" window frame height. (3) Secure the window panel to the window frame with 3 screws. Extension panel Adjustment panel Inner height of the window: 45.3" (1150mm) - 70.9" (1800mm) Use the window panel, the adjustment panel and the extens
Resumen del contenido incluido en la página 16
INSTALLATION AND REMOVAL OF EXHAUST HOSE Installation of the exhaust hose Attach the window adapter to the 1 exhaust hose. Extend one end of the exhaust hose and insert it into the window adapter, and turn it Window (approx. three times) until it stops. adapter Make sure they are securely attached. Extend Exhaust hose Exhaust hose Attach the exhaust hose to the unit. 2 Insert the two projections into the two holes on the unit, and firmly attach them to each other until they click.
Resumen del contenido incluido en la página 17
ENGLISH Removal of the exhaust hose Remove the window adapter. "PUSH" 1 Pull out and remove the window adapter by pushing down two “PUSH” markings, and slide and close the exhaust cover in the win- dow panel. Remove the exhaust hose from the 2 unit. Lift up and remove the exhaust hose from Exhaust hose the unit by pushing on the two projections. Projection EN-15 CV-2P10SC_en.indd 15 11.3.22 11:00:15 AM
Resumen del contenido incluido en la página 18
PRE-OPERATION CHECKS POWER PLUG CHECK This unit uses a fused power plug. Always check the power plug before use. TEST Press the RESET button. RESET 1 Insert the power plug into the wall sock- 2 et. Press the TEST button. 3 You will hear a CLICK if the circuit breaker is functioning correctly. Press the RESET button until you hear 4 another CLICK. The circuit breaker is activated, power is supplied, and the unit is now ready for use. CAUTION: Do not attempt to use the unit if the abov
Resumen del contenido incluido en la página 19
ENGLISH PRE-OPERATION CHECKS HOW TO USE THE REMOTE CONTROL Point the remote control toward the receiver window and press the desired button. The unit generates a beep when it receives the signal. • Make sure nothing, such as curtains, blocks the signal receiver window. • The signal effective distance is 23 feet (7 m). CAUTION: • Do not expose the receiver window to direct sun- light. This may adversely affect its operation. • Use of certain fluorescent lamp in the same room may interfere wit
Resumen del contenido incluido en la página 20
USE FOR AIR CONDITIONER Use when the unit operates with the cool, dehumidification, fan or ventilation mode. During operation, Plasmacluster ions are released into the room. • The exhaust hose must be installed in these modes. • Ensure that the stopcock is securely attached the drainpipe. • When cool or dehumidification operation is performed at high humidity conditions, water tank inside the unit may frequently become full. When the water tank is full, the unit stops operating and TIMER, AIR
