Manual de instrucciones de JVC SA-K51U

Resumen del contenido incluido en la página 1

OPTION HDD KIT
SA-K51U
INSTRUCTIONS
R
For Customer Use:
VICTOR COMPANY OF JAPAN, LIMITED
Enter below the Serial No. which is
located on the body. Retain this
information for future reference.
This instruction book is made from
Model No. SA-K51U 100% recycled paper.
is a registered trademark owned by VICTOR COMPANY OF JAPAN, LTD.
is a registered trademark in Japan, the U.S.A., the U.K. and many other countries. Serial No.
Printed in Japan
© 2002 VICTOR COMPANY OF JAPAN, LIMI

Resumen del contenido incluido en la página 2

11. For added protection for this product during a lightning storm, or when it is left unattended IMPORTANT SAFEGUARDS and unused for long periods of time, unplug it form the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges. 1. Read all of these instructions. 12. Do not allow anything to rest on the power cord. Do not locate this appliance where the 2. Save these instructions for later use. cord will be abused

Resumen del contenido incluido en la página 3

Safety Precautions Thank you for purchasing this product. Features (These instrustions are for SA-K51U) Before beginning to operate this unit, please read the instruction manual carefully in Attaching the expansion hard disk SA-K51U to the VR-510U increases the memory capacity order to make sure that the best possible performance is obtained. to 160 GB and makes long-time recording possible. Due to design modifications, data given in this FOR USA AND CANADA instruction book are subject to possib

Resumen del contenido incluido en la página 4

3. Fix the SA-K51U in place by inserting the screws (black) into the four screw holes of the How to Attach stand and tightening them while the connector part of the SA-K51U is positioned so that it is faces the rear panel of the VR-510U. First, set the ID of the hard disk drive to “SLAVE.” Refer to the instructions on how to set the ID shown on the top (side with the model-name label affixed) of the hard disk drive. * Keep the screws straight and steady when tightening them because the stand has

Resumen del contenido incluido en la página 5

4. Select 2.HDD MOUNT by turning the jog dial and then return the shuttle dial to the How to Mount SELECT position by turning it either clockwise or anticlockwise. The following describes how to operate the front panel of the VR-510U to mount the SA- The jog operation switches from J.DIR ↑ ↓ to J.DIR – +. [ FUNCTI ON -1] J . D I R – + K51U. 1. FACTORY SETT I NG OFF 2 . HDD MOUN T [ - - - - ] O F F 3. D I P SW- 0 OFF 4. D I P SW- 1 OFF 1. Insert the plug into the plug socket and switch on the pow

Resumen del contenido incluido en la página 6

How to Verify Mounting Specifications The following describes how to operate the front panel of the VR-510U to verify that the SA- ● Mass: Approx. 750 g (including stand) K51U is mounted. ● Power Consumption: 9 W or less ● Allowable operating temperature: 5°C to 40°C 1. Press the MENU button. ● Allowable storage temperature: –20°C to 60°C The MENU screen is displayed. [MENU ] J . D I R · ● Allowable operating humidity: 30% to 80% RH CLOCK S E T ONSCRE EN / F . D I S P MODE ● Accessories: Stand ×