Resumen del contenido incluido en la página 1
USB DRIVER
INSTALLATION GUIDE
Thank you for using the Icom Download Service.
Please read this installation guide before installing the USB driver into your PC that is connected to the IC-7200
with the USB (Universal Serial Bus) cable (third party).
OVERVIEW
When the transceiver is connected to a PC with the System requirements
USB cable, the following operations can be performed;
The PC which supports the following OS (Operating
System) is required;
• Remote control operation (CI-V: Icom Comm
Resumen del contenido incluido en la página 2
PRECAUTIONS Before connecting to the PC For IC-PCR1500/IC-PCR2500 user The process of connecting the USB cable (third party) • USB driver on the supplied CD between the transceiver and a PC may differ accord- The file that is included on the supplied CD with ing to your OS. the IC-PCR1500/IC-PCR 500 is the same as the See the “Driver installation” on pgs. 4 to 11 for details. download file from Icom HP. So, the USB driver in- stallation can also be performed with the supplied • A fter the dr
Resumen del contenido incluido en la página 3
PREPARING Before installing the USB driver Icom HP gives the USB driver download service. Before installing the USB driver, download the follow- ing compressed file. • USB driver (File name: 7200UsbDrv_v100.zip) Icom is not responsible for any damage or lack of data resulting from the use of the USB driver. 3
Resumen del contenido incluido en la página 4
DRIVER INSTALLATION Windows Vista NOTE: • NEVER connect the transceiver to the PC with the USB cable (third party) until the USB driver installation has been completed. • The USB driver for Windows Vista does not support the automatic recognition system. The displayed dialogue boxes, indications or oper- t “A program needs your permission to continue” dia- ations may differ slightly from the following instruc- logue box appears as below. tions according to your system conditions or envi- Cli
Resumen del contenido incluido en la página 5
DRIVER INSTALLATION Windows Vista (Continued) o After restarting the PC, connect the transceiver to !0 Turn the transceiver power ON. • “Installing device driver software” appears as below. the PC with the USB cable (third party) as shown below. • Be sure to connect the USB cable correctly and not up- side down. REMOTE !1 After the dialogue appears as below, USB driver installation has been completed. KEY SEND ALC ACC Transceiver To USB jack Type B USB cable (third party) Type A PC To USB
Resumen del contenido incluido en la página 6
DRIVER INSTALLATION (Continued) Windows XP NOTE: BE SURE to connect the transceiver to the PC with the USB cable (third party) before installing the USB driver. The displayed dialogue boxes, indications or oper- t The “Welcome to the Found New Hardware Wizard” ations may differ slightly from the following instruc- will come up as below. tions according to your system conditions or envi- Select “No, not this time,” then click [Next>]. ronment. q Make sure that the transceiver is not connect
Resumen del contenido incluido en la página 7
DRIVER INSTALLATION Windows XP (Continued) i Select the “Win” folder, then click [OK]. !2 Windows starts installing the USB driver. • The folder construction: “7200UsbDrv_v100” ➞ “Driver” ➞ “Win” Select Click o Click [Next>]. !3 After the installation is completed, click [Finish]. Click Click !0 The Wizard starts searching for the driver and !4 After clicking [Finish], the dialogue appears as below. shows the dialogue below during search. !5 The “Welcom to the Found New Hardware Wizard”
Resumen del contenido incluido en la página 8
DRIVER INSTALLATION Windows XP (Continued) !6 S elect “Install from a list or specific location @0 The Wizard starts searching for the driver and (Advanced),” then click [Next>]. shows the dialogue below during search. Select Click @ 1 After the driver is found, the “Hardware Installation” !7 Select “Search for the best driver in these locations.” dialogue box appears as below. then select “Include this location in the search:”, Clic k [Continue Anyway] to start the installation. and clic
Resumen del contenido incluido en la página 9
DRIVER INSTALLATION (Continued) Windows 2000 NOTE: BE SURE to connect the transceiver to the PC with the USB cable (third party) before installing the USB driver. The displayed dialogue boxes, indications or oper- t The “Found New Hardware Wizard” will come up as ations may differ slightly from the following instruc- below. tions according to your system conditions or envi- Click [Next>]. ronment. q Mak e sure that the transceiver is not connected to the PC. w Start up Windows. • Quit all
Resumen del contenido incluido en la página 10
DRIVER INSTALLATION Windows 2000 (Continued) o Select “slabbus.inf” in the “Win” folder, then click !2 After the installation is completed, click [Finish]. [Open]. • The folder construction: “7200UsbDrv_v100” ➞ “Driver” ➞ “Win” Select “slabbus.inf” Click Click !3 The “Found New Hardware Wizard” appears again. Click [Next>]. !0 Click [OK]. Click Click !1 When the driver is found, the following dialogue is displayed. Click [Next>] to start the installation. !4 Select “Search for a suitab
Resumen del contenido incluido en la página 11
DRIVER INSTALLATION Windows 2000 (Continued) !6 Click [Browse...]. !9 When the driver is found, the following dialogue is displayed. Click [Next>] to start the installation. Click !7 Select “slabw2k.inf” in the “Win” folder, then click [Open]. • T he folder construction: “7200UsbDrv_v100” ➞ Click “Driver” ➞ “Win” @ 0After the installation is completed, click [Finish]. Select “slabw2k.inf” • Restarting the PC is recommended. Click !8 Click [OK]. Click Click 11
Resumen del contenido incluido en la página 12
COM PORT CONFIRMATION After the driver installation is completed, confirming the driver availability and the port number is recommended. Windows Vista Windows XP q Start up Windows. For Windows 2000: w Right click “Computer,” then select “Properties.” Refer to the following instructions because the • “Computer” is available in menu. operations of Windows 2000 are similar to Windows e “System” screen appears as below. XP. Click [Device Manager]. q Start up Windows. w Right click “My
Resumen del contenido incluido en la página 13
DRIVER UNINSTALLATION The displayed dialogue boxes or indications may differ slightly from the following instructions according to your system conditions, or environment. Windows Vista Windows XP q Start up Windows. For Windows 2000: w Select the “Control Panel” in the Start menu. Refer to the following instructions because the • The control panel appears as shown in the next step operations of Windows 2000 are similar to Windows below. XP. e Click the “Uninstall a program.” • The “Unins
Resumen del contenido incluido en la página 14
FOR YOUR REFERENCE When the transceiver is connected to a PC with the USB cable (third party), remote control operation can be per- formed with the CI-V command. The IC-7200 has the USB-Serial convert function, so the PC recognizes the connected transceiver as COM port and the CI-V control software can be used. Simultaneous use of the [USB] and [REMOTE] jacks are available. COM Port setting To change the COM Port number setting, connect the transceiver to the PC and then turn the transceiver po
Resumen del contenido incluido en la página 15
FOR YOUR REFERENCE COM Port setting (Continued) Windows XP t Clic k [Port Settings] tab, then click [Advanced...]. For Windows 2000: Refer to the following instructions because the operations of Windows 2000 are similar to Windows XP. Click q Start up Windows. w Right click “My Computer,” then select “Properties.” • “My Computer” is available in menu. e “System Properties” screen appears as below. Click [Hardware] tab and then click [Device Man- ager]. Click Click Click y Set the
Resumen del contenido incluido en la página 16
FOR YOUR REFERENCE (Continued) About audio When the transceiver is connected to a PC with the USB cable (third party), the following operations can be performed; • Received audio output to the PC. • Modulation input from the PC. The set mode item ‘Modulation input (Data OFF)’ or ‘Modulation input (Data ON)’ must be set as “U” (USB) for modulation input from the PC. See p. 17 on this installation guide or p. 77 on the IC-7200 instruction manual for details of settings. [Received audio output to
Resumen del contenido incluido en la página 17
FOR YOUR REFERENCE About audio (Continued) The modulation input settings To input the audio signal from the USB jack of the transceiver, set the modulation input connector as “USB” in the set mode item ‘Modulation input (Data OFF)’ or ‘Modulation input (Data ON)’, or CI-V system (command). • When the data mode is OFF (SSB or AM mode is in use) M-CH/RIT q Push and hold SET for 1 sec. twice to enter the set mode. w Rotate [M-CH] to select “Mod.” ANF NB NR METER 1 A/B 2 3 V/M SPLIT 1.
Resumen del contenido incluido en la página 18
FOR YOUR REFERENCE About audio (Continued) USB level setting Set the input modulation level of the USB jack in the set mode item ‘USB Level’ or CI-V system (command). M-CH/RIT SET q Push and hold for 1 sec. twice to enter the set mode. ANF NB NR METER w Rotate [M-CH] to select “USB LVL.” V/M 1 A/B 2 3 SPLIT 1.8 = 3.5 7 4 5 6 M-CL AGC MW10 14 18 e Rotate [DIAL] to set the input modulation level of 7 8 9 COMP SCAN VOX 21 24 28 . the USB jack within 0% to 100% in 1% steps. MODE TS 0
Resumen del contenido incluido en la página 19
FOR YOUR REFERENCE (Continued) Specifications Connector type USB B type Interface USB 2.0/1.1 Power supply Self power The PC cannot recognize the transceiver when the power is OFF. Support OS Windows Vista Windows XP Windows 2000 Serial for CI-V Compliant for CI-V spec. Asynchronous serial Construction (1 bite) Start bit : 1 Data bit : 8 Parity bit : No Stop bit : 1 Speed : 300/1200/4800/9600/19200 bps Received audio output Number of data bit : 16-bit Sampling ra
