Resumen del contenido incluido en la página 1
C141-E257-02EN
MBB2147RC
MBB2073RC
HARD DISK DRIVES
PRODUCT MANUAL
Resumen del contenido incluido en la página 2
FOR SAFE OPERATION Handling of This Manual This manual contains important information for using this product. Read thoroughly before using the product. Use this product only after thoroughly reading and understanding especially the section "Important Alert Items" in this manual. Keep this manual handy, and keep it carefully. FUJITSU makes every effort to prevent users and bystanders from being injured or from suffering damage to their property. Use the product according to this manual.
Resumen del contenido incluido en la página 3
REVISION RECORD Edition Date published Revised contents 01 April, 2007 02 July, 2007 The followings are changed. - Important Alert Items - Section 1.2 - Table 2.2 and Table 2.3 - (1) of Subsection 3.3.2 - (6) of Subsection 4.1.3 - Section 5.1 - (1) and (3) of Subsection 5.4.1 - Subsection 5.4.2 - (2) and (4) of Subsection 5.4.3 - Subsection 6.1.1 - Damage of Subsection 6.2.1 - Subsection 6.3.2 - Damage of Subsection 6.4.3 - Subsection 7.2.1 Specification No.: C141-E257-
Resumen del contenido incluido en la página 4
Related Standards Product specifications and functions described in this manual comply with the following ANSI (*1) standards and SFF Committee specifications. Document number Title T10/1236D Rev.20 SCSI Primary Commands-2 (SPC-2) [NCITS.351:2001] T10/996D Rev. 8c SCSI-3 Block Commands (SBC) [NCITS.306:1998] T10/1157D Rev. 24 SCSI Architecture Model-2 (SAM-2) T10/1561D Rev. 14 SCSI Architecture Model-3 (SAM-3) T10/1562D Rev. 05 Serial Attached SCSI (SAS) T10/1601D Rev. 10 Serial At
Resumen del contenido incluido en la página 5
Preface This manual describes MBB2147RC and MBB2073RC, 2.5-inch type hard disk drives with an embedded Serial Attached SCSI (SAS). This manual details the specifications and functions of the above disk drive, and gives the requirements and procedures for installing it into a host computer system. This manual is written for users who have a basic understanding of hard disk drives and their use in computer systems. The MANUAL ORGANIZATION section describes organization and scope of this
Resumen del contenido incluido en la página 6
Preface CONVENTIONS USED IN THIS MANUAL MBB2147RC and MBB2073RC hard disk drives are described as "the HDD" in this manual. Decimal number is represented normally. Hexadecimal number is represented as X'17B9', 17B9h or 17B9H. Binary number is represented as "010". Conventions for Alert Messages This manual uses the following conventions to show the alert messages. An alert message consists of an alert signal and alert statements. The alert signal consists of an alert symbol and a sig
Resumen del contenido incluido en la página 7
Important Alert Items Important Alert Messages The important alert messages in this manual are as follows: A hazardous situation could result in minor or moderate personal injury if the user does not perform the procedure correctly. Also, damage to the product or other property, may occur if the user does not perform the procedure correctly. Task Alert message Page Installation Damage 43 Never remove any labels from the HDD or deface them in any way. High temperature To
Resumen del contenido incluido en la página 8
Important Alert Items Task Alert message Page Diagnostics Data loss and Save data stored on the HDD to other media before requesting repair. 67 Maintenance Fujitsu does not assume responsibility if data is corrupted during servicing or repair. High temperature 67 To prevent injury, never touch the HDD while it is hot. The DE and LSI become hot during operation and remain hot immediately after turning off the power. Electrical shock 67 Never touch the HDDs while power-fee
Resumen del contenido incluido en la página 9
MANUAL ORGANIZATION PRODUCT MANUAL 1. General Description 2. Specifications (This manual) 3. Data Format 4. Installation Requirements 5. Installation 6. Diagnostics and Maintenance 7. Error Analysis SAS INTERFACE 1. SAS Interface MANUAL 2. Command Processing 3. Data Buffer Management 4. Command Specifications 5. Parameter Data Formats 6. Sense Data and Error Recovery Methods 7. Disk Media Management C141-E257 5
Resumen del contenido incluido en la página 10
This page is intentionally left blank.
Resumen del contenido incluido en la página 11
CONTENTS CHAPTER 1 General Description....................................................................13 1.1 Standard Features......................................................................................13 1.2 Hardware Structure ...................................................................................17 1.3 System Configuration ...............................................................................18 CHAPTER 2 Specifications ...................................
Resumen del contenido incluido en la página 12
Contents 4.1.1 Dimensions............................................................................................... 41 4.1.2 Mounting orientations .............................................................................. 42 4.1.3 Notes on mounting ................................................................................... 43 4.2 Power Supply Requirements.................................................................... 46 4.3 Connection Requirements .....................
Resumen del contenido incluido en la página 13
Contents 6.2.5 Tests ..........................................................................................................70 6.3 Operation Check .......................................................................................71 6.3.1 Initial seek operation check ......................................................................71 6.3.2 Operation test............................................................................................71 6.3.3 Diagnostic test..........
Resumen del contenido incluido en la página 14
Contents Illustrations Figures Figure 1.1 Example of SAS system configuration (Dual port internal cabled environment) ...................................................................... 18 Figure 1.2 Example of SAS system configuration (Dual port internal backplane environment)................................................................. 18 Figure 3.1 Cylinder configuration................................................................... 28 Figure 3.2 Spare area in cell.......
Resumen del contenido incluido en la página 15
Contents Tables Table 2.1 Model names and order numbers .................................................. 21 Table 2.2 Function specifications.................................................................. 22 Table 2.3 Environmental/Power requirements.............................................. 24 Table 3.1 Format capacity ............................................................................. 34 Table 4.1 Surface temperature check point and maximum temperature....... 45
Resumen del contenido incluido en la página 16
This page is intentionally left blank.
Resumen del contenido incluido en la página 17
CHAPTER 1 General Description 1.1 Standard Features 1.2 Hardware Structure 1.3 System Configuration This chapter describes the feature and configuration of the hard disk drives (HDDs). The HDDs are high performance large capacity 2.5-inch hard disk drives with an embedded Serial Attached SCSI (SAS) controller. The interface used to connect the HDDs to the host system complies with ANSI T10/1601-D Serial Attached SCSI-1.1 (SAS-1.1), which covers items ranging from SAS physi
Resumen del contenido incluido en la página 18
General Description (4) Dual SAS port support The HDDs have two pairs of driver and receiver set (PHY) for the SAS to support dual SAS port connection. On HDDs, Primary and Secondary Ports on SAS plug connector (2 physical links plus power connections) are used for SAS port connection. (5) High-speed data transfer The maximum data-transfer speed on the SAS is 300.0 MB/s. The large-capacity data buffer of the HDDs enable the effective use of such high-speed data transfers avai
Resumen del contenido incluido en la página 19
1.1 Standard Features (9) Command queuing feature The HDDs can queue maximum 128 commands, and optimizes the issuing order of queued commands by the reordering function. This feature realizes the high speed processing. (10) Reserve and release functions The HDDs can be accessed exclusively in the multi-host or multi-initiator environment by using the reserve and release functions. (11) Error recovery The HDDs can try to recover from errors in the HDD using its powerful
Resumen del contenido incluido en la página 20
General Description (16) Large capacity A large capacity can be obtained from the HDDs by dividing all cylinders into several partitions and changing the recording density on each partition (constant density recording). The disk subsystem with large capacity can be constructed in the good space efficiency. (17) Start/Stop of spindle motor Using the SAS primitive or the SCSI command, the host system can start and stop the spindle motor. (18) Diagnosis The HDDs have a diagnosti
