Resumen del contenido incluido en la página 1
A Sierra Monitor Company
Driver Manual
(Supplement to the FieldServer Instruction Manual)
FS-8700-22 X30 DeviceNet Slave Adapter
Driver
APPLICABILITY & EFFECTIVITY
Effective for all systems manufactured after May 1, 2001
Driver Version: 1.00
Document Revision: 2
Resumen del contenido incluido en la página 2
FS-8700-22_X30_DeviceNet_Slave Manual Table of Contents TABLE OF CONTENTS 1. X30 DEVICENET SLAVE DESCRIPTION....................................................................... 3 2. DRIVER SCOPE OF SUPPLY......................................................................................... 4 2.1. Supplied by FieldServer Technologies for this driver.................................................. 4 rd 2.2. Provided by the Supplier of 3 Party Equipment ...........................
Resumen del contenido incluido en la página 3
FS-8700-22_X30_DeviceNet_Slave Manual Page 3 of 12 1. X30 DeviceNet Slave Description The X30 DeviceNet Slave Adapter driver can be used to emulate a single slave station on a DeviceNet network. The FieldServer DeviceNet adapter is implemented as an ODVA profile 12 communications adapter and acts as a group 2 only server on the DeviceNet network. Standard DeviceNet baudrates of 125k, 250k and 500kbit/s are supported. DeviceNet masters/scanners can open an IO connection of up to
Resumen del contenido incluido en la página 4
FS-8700-22_X30_DeviceNet_Slave Manual Page 4 of 12 2. Driver Scope of Supply 2.1. Supplied by FieldServer Technologies for this driver FieldServer Technologies Description PART # FS-8700-22 Driver Manual. X30-DeviceNet-Slave Anybus-S DeviceNet Card rd 2.2. Provided by the Supplier of 3 Party Equipment rd 2.2.1. Required 3 Party Software RSNetWorx, RSLogix or another Network Scheduling Tool. rd 2.2.2. Required 3 Party Configuration Connection to a properly terminated DeviceN
Resumen del contenido incluido en la página 5
FS-8700-22_X30_DeviceNet_Slave Manual Page 5 of 12 3. Hardware Connections The FieldServer is connected to the DeviceNet network as shown in the connection drawing below. 3.1. Hardware Connection Tips / Hints Use the recommended network cable and terminators as specified by the DeviceNet network organization and/or the manufacturer of your network equipment. FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com Tel: (408) 262-2299 Fax
Resumen del contenido incluido en la página 6
FS-8700-22_X30_DeviceNet_Slave Manual Page 6 of 12 4. Configuring the FieldServer as a DeviceNet Slave For a detailed discussion on FieldServer configuration, please refer to the FieldServer Configuration Manual. The information that follows describes how to expand upon the factory defaults provided in the configuration files included with the FieldServer (See “.csv” files provided with the FieldServer). This section documents and describes the parameters necessary for configuring th
Resumen del contenido incluido en la página 7
FS-8700-22_X30_DeviceNet_Slave Manual Page 7 of 12 4.2. Server Side Connection Descriptors Section Title Connections Column Title Function Legal Values Adapter Adapter Name DNet Protocol Protocol name X30_DNet_Slave DNet_Slave_Baudrate Baudrate 125K , 250K , 500K Example // Server Side Connections Connections Adapter, Protocol, DNet_Slave_Baudrate DNet, X30_DNet_Slave, 500K 4.3. Server Side Node Descriptors Section Title Nodes Column Title Function Legal
Resumen del contenido incluido en la página 8
FS-8700-22_X30_DeviceNet_Slave Manual Page 8 of 12 4.4. Server Side Map Descriptors 4.4.1. FieldServer Specific Map Descriptor Parameters Column Title Function Legal Values Up to 32 alphanumeric Map_Descriptor_Name Name of this Map Descriptor characters Name of Data Array where One of the Data Array names Data_Array_Name data is to be stored in the from “Data Array” section FieldServer above Starting location in Data 0 to maximum specified in Data_Array_Offset Array “Data Array
Resumen del contenido incluido en la página 9
FS-8700-22_X30_DeviceNet_Slave Manual Page 9 of 12 4.4.3. Map Descriptor Example. // Client side Map Descriptors Map_Descriptors Map_Descriptor_Name, Data_Array_Name, Data_Array_Offset, Function, Node_Name, DeviceNet_Data_Type, Address, Length, Scan_Interval Get_Data, Input_Data, 0, RDBC, CN5, WORD, 0, 10, 1s Put_Data, Output_Data, 0. WRBC, CN5, WORD, 0, 10, 1s Read function map Write function map descriptor gets data Note that each address descriptor puts
Resumen del contenido incluido en la página 10
FS-8700-22_X30_DeviceNet_Slave Manual Page 10 of 12 Appendix A. Advanced Topics Appendix A.1. DeviceNet X30 LED indicators LED 1 – Reserved LED 2 – Network Status Color Frequency Description - Off Not powered / Not online Green On Link OK, online, connected Green Flashing Online, not connected Red On Critical link failure Red Flashing Connection timeout LED 3 – Module Status Color Frequency Description - Off Not powered Green On Device operational Green Flashing Data
Resumen del contenido incluido en la página 11
FS-8700-22_X30_DeviceNet_Slave Manual Page 11 of 12 Appendix B. Driver Notes Appendix B.1. Setting the FieldServer’s DeviceNet MAC ID and Baudrate The MAC ID and Baudrate can be set in the FieldServer’s CSV file using the System_Station_Address and DNet_Slave_Baudrate parameters or it can be set with the DIP switches. Note that the System_Station_Address parameter must be removed from the config file if the DIP switch settings is to be used. FieldServer Technologies 1991 Tar
Resumen del contenido incluido en la página 12
FS-8700-22_X30_DeviceNet_Slave Manual Page 12 of 12 THIS PAGE INTENTIONALLY LEFT BLANK FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldserver.com
