Resumen del contenido incluido en la página 1
When you installing AGP card, please make sure the following
notice is fully understood and practiced. If your AGP card has
"AGP 4X notch"(show below), please make sure your AGP card is
AGP 4X (1.5V).
®
Caution: AGP 2X card is not supported by Intel 845(GE/PE) /
845(E/G) / 850(E). You might experience system unable to boot up
normally. Please insert an AGP 4X card.
Example 1: Diamond Vipper V770 golden finger is compatible with 2X/4X
mode AGP slot. It can be switched between AGP 2X(3.3V) or 4X(1
Resumen del contenido incluido en la página 2
M The author assumes no responsibility for any errors or omissions that may appear in this document nor does the author make a commitment to update the information contained herein. M Third-party brands and names are the property of their respective owners. M Please do not remove any labels on motherboard, this may void the warranty of this motherboard. M Due to rapid change in technology, some of the specifications might be out of date before publication of this booklet.
Resumen del contenido incluido en la página 3
Declaration of Conformity We, Manufacturer/Importer (full address) G.B.T. Technology Träding GMbH Ausschlager Weg 41, 1F, 20537 Hamburg, Germany declare that the product ( description of the apparatus, system, installation to which it refers) Mother Board GA-8GEM667 is in conformity with (reference to the specification under which conformity is declared) in accordance with 89/336 EEC-EMC Directive !!!!! EN 55011 Limits and methods of measurement !!!!! EN 61000-3-2* Disturbances in supply systems
Resumen del contenido incluido en la página 4
DECLARATION OF CONFORMITY Per FCC Part 2 Section 2.1077(a) Responsible Party Name:G.B.T. INC. (U.S.A.) Address: 17358 Railroad Street City of Industry, CA 91748 Phone/Fax No:(818) 854-9338/ (818) 854-9339 hereby declares that the product Product Name: Motherboard GA-8GEM667 Model Number: Conforms to the following specifications: FCC Part 15, Subpart B, Section 15.107(a) and Section 15.109 (a),Class B Digital Device Supplementary Information: This device complies with part 15 of the FCC Rules. Op
Resumen del contenido incluido en la página 5
GA-8GEM667 Series P4 Titan-DDR Motherboard USER’S MANUAL ® Pentium 4 Processor Motherboard Rev. 1001 12ME-8GEM667-1001
Resumen del contenido incluido en la página 6
Table of Content Item Checklist ......................................................................................... 4 WARNING! ............................................................................................... 4 Chapter 1 Introduction ............................................................................. 5 Features Summary ...................................................................................... 5 GA-8GEM667 Series Motherboard Layout .......................
Resumen del contenido incluido en la página 7
English Top Performance ...................................................................................... 42 Load Fail-Safe Defaults ............................................................................. 43 Load Optimized Defaults ........................................................................... 44 Set Supervisor/User Password .................................................................. 45 Save & Exit Setup .............................................................
Resumen del contenido incluido en la página 8
Item Checklist þ The GA-8GEM667 motherboard o 2 Port USB Cable x 1 þ IDE cable x 1/ Floppy cable x 1 o 4 Port USB Cable x 1 þ CD for motherboard driver & utility o SPDIF-KIT x 1 (SPD-KIT) þ GA-8GEM667 series user’s manual o IEEE 1394 Cable x1 þ I/O Shield (*) o Audio Combo Kit x 1 o Quick PC Installation Guide o Motherboard Settings Label o RAID Manual WARNING! Computer motherboards and expansion cards contain very delicate Integrated Circuit (IC) chips. To protect them against damage from stati
Resumen del contenido incluido en la página 9
English Chapter 1 Introduction Features Summary Form Factor ! 24.4cm x 22cm Micro-ATX size form factor, 4 layers PCB. Motherboard ! GA-8GEM667 Series Motherboard: GA-8GEM667 and GA-8GEM667-C ® ® CPU ! Socket 478 for Intel Micro FC-PGA2 Pentium 4 processor ® ® ! Support Intel Pentium 4 (Northwood, 0.13 m) processor ® ® ! Support Intel Pentium 4 Processor with HT Technology ® ! Intel Pentium 4 400/533MHz FSB ! 2nd cache depends on CPU Chipset ! Chipset Intel 845GE HOST/AGP/Controller ! ICH4
Resumen del contenido incluido en la página 10
Hardware Monitor ! CPU/System Fan Revolution detect ! CPU/System Fan Fail Warning ! CPU Overheat Warning ! System Voltage Detect On-Board VGA ! Built in Intel 845GE Chipset On-Board Sound ! Realtek ALC650 CODEC ! Line Out / 2 front speaker ! Line In / 2 rear speaker(by s/w switch) ! Mic In / center& subwoofer(by s/w switch) ! SPDIF out ! 1 Buzzer ! CD In / AUX In / Game port On-Board LAN * ! Builit in RTL8101L Chipset ! 1 RJ 45 port PS/2 Connector ! PS/2 Keyboard interface and PS/2 Mouse interf
Resumen del contenido incluido en la página 11
English HT functionality requirement content "Enabling the functionality of Hyper-Threading Technology for your computer system requires all of the following platform components: ® - CPU: An Intel Pentium 4 Processor with HT Technology ® - Chipset: An Intel Chipset that supports HT Technology - BIOS: A BIOS that supports HT Technology and has it enabled - OS: An operation system that has optimizations for HT Technology - 7 - Introduction
Resumen del contenido incluido en la página 12
GA-8GEM667 Series Motherboard Layout KB_MS CPU_FAN ATX FDD SOCKET478 ATX_12V F_AUDIO 845GE 2X_DET IDE1 AGP IDE2 IT8712 CODEC BUZZER PCI1 ICH4 PCI2 SYS _FAN SPDIF_O BAT PCI3 BIOS * RTL 8101L PWR_LED IR_CIR F_USB1 F_USB2 F_PANEL CD_IN * MODEM CI WOL COMB “ * ” Only for GA-8GEM667. GA-8GEM667 Series Motherboard - 8 - English MIC_IN LINE_OUT VGA USB LINE_IN COMA GAME LPT LAN * SUR_CEN GA-8GEM667 DDR1 DDR2 CLR_PWD
Resumen del contenido incluido en la página 13
English Chapter 2 Hardware Installation Process To set up your computer, you must complete the following steps: Step 1- Install the Central Processing Unit (CPU) Step 2- Install memory modules Step 3- Install expansion cards Step 4- Connect ribbon cables, cabinet wires, and power supply Step 5- Setup BIOS software Step 6- Install supporting software tools Step 1 Step 4 Step 1 Step 2 Step 4 Step 4 Step 3 - 9 - Hardware Installation Process
Resumen del contenido incluido en la página 14
Step 1: Install the Central Processing Unit (CPU) Step1-1 : CPU Installation Angling the Socket 0 rod to 65 Actuation Lever 2. Pull the rod to the 90-degree directly. 1. Angling the rod to 65-degree maybe feel a kind of tight, and then continue pull the rod to 90-degree when a noise “cough” made. Pin1 indicator Pin1 indicator 4. Locate Pin 1 in the socket and look 3. CPU Top View for a (golden) cut edge on the CPU upper corner. Then insert the CPU into the socket. ! ! ! ! ! Please make sure the
Resumen del contenido incluido en la página 15
English Step1-2 : CPU Heat Sink Installation 2. Hook the other end of the 1. Hook one end of the cooler cooler bracket to the CPU bracket to the CPU socket first. socket. ! ! ! ! ! Please use Intel approved cooling fan. ! ! ! ! ! We recommend you to apply the thermal tape to provide better heat conduction between your CPU and heatsink. (The CPU cooling fan might stick to the CPU due to the hardening of the thermal paste. During this condition if you try to remove the cooling fan, you might pull
Resumen del contenido incluido en la página 16
Step 2: Install memory modules The motherboard has 2 dual inline memory module (DIMM) sockets. The BIOS will automatically detects memory type and size. To install the memory module, just push it vertically into the DIMM socket .The DIMM module can only fit in one direction due to the notch. Memory size can vary between sockets. Total Memory Sizes With Unbuffered DDR DIMM Devices used on DIMM 1 DIMM x 64 / x 72 2 DIMMs x 64 / x 72 64 Mbit (2Mx8x4 banks) 128 MBytes 256 MBytes 64 Mbit (1Mx16x4
Resumen del contenido incluido en la página 17
English DDR Introduction Established on the existing SDRAM industry infrastructure, DDR (Double Data Rate) memory is a high performance and cost-effective solution that allows easy adoption for memory vendors, OEMs and system integrators. DDR memory is a sensible evolutionary solution for the PC industry that builds on the existing SDRAM infrastructure, yet makes awesome advances in solving the system performance bottleneck by doubling the memory bandwidth. DDR SDRAM will offer a superior soluti
Resumen del contenido incluido en la página 18
Step 4: Connect ribbon cables, cabinet wires, and power supply Step 4-1: I/O Back Panel Introduction #(*) $ % " & " " " " " PS/2 Keyboard and PS/2 Mouse Connector PS/2 Mouse Connector Ø This connector supports standard PS/2 keyboard and PS/2 mouse. (6 pin Female) PS/2 Keyboard Connector (6 pin Female) Ø Before you connect your device(s) into USB # USB Connector connector(s), please make sure your device(s) such as USB keyboard,mouse, scanner, zip, LAN(*) Connector speaker..etc. Have a standard U
Resumen del contenido incluido en la página 19
English $ Parallel Port and VGA Port / COMA Port Parallel Port Ø This mainboard sutports 1 standard COM port, (25 pin Female) 1 VGA port and 1 LPT port. Device like printer can be connected to LPT port ; mouse and modem etc can be connected to COM port. Serial Port VGA Port (9 pin Male) (15 pin Female) % Game /MIDI Ports Ø This connector supports joystick, MIDI keyboard and other relate audio devices. Joystick/ MIDI (15 pin Female) & Audio Connectors Ø After install onboard audio driver, you ma
Resumen del contenido incluido en la página 20
Step 4-2 : Connectors Introduction 1 3 4 6 10 5 21 11 8 20 13 2 15 9 19 12 16 17 18 14 7 1) CPU_FAN 13) SPDIF_O 2) SYS_FAN 14) F_USB1/F_USB2 3) ATX_12V 15) CI 4) ATX 16) IR_CIR 5) IDE1/IDE2 17) WOL 6) FDD 18) COM B 7) PWR_LED 19) MODEM (*) 8) 2X_DET 20) BAT 9) F_PANEL 21) CLR_PWD 10) F_AUDIO 11) SUR_CEN 12) CD_IN “ * ” Only for GA-8GEM667. GA-8GEM667 Series Motherboard - 16 - English
