Resumen del contenido incluido en la página 1
READ AND SAVE THESE INSTRUCTIONS
Coffee Maker
USE AND CARE GUIDE FOR
MODEL ME2TMB
Resumen del contenido incluido en la página 2
Resumen del contenido incluido en la página 3
IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed, including the following: • Read all instructions. • Do not touch hot surfaces. Use handles or knobs. • To protect against electric shock, do not place cord, plugs, or appliance in water or other liquid. • Close supervision is necessary when any appliance is used by or near children. • Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts
Resumen del contenido incluido en la página 4
ADDITIONAL IMPORTANT SAFEGUARDS WARNING: This appliance generates heat and escaping steam during use. Use proper precautions to prevent the risk of burns, fires, or other injury to persons or damage to property. • All users of this appliance must read and understand this Owner’s Manual before operating or cleaning this appliance. • The cord to this appliance should be plugged into a 120V AC electrical outlet only. • Use water only in this appliance! Do not put any other liquids or food products
Resumen del contenido incluido en la página 5
CAUTION: A short power supply cord is provided to reduce the risk resulting from becoming entangled in or tripping over a longer cord. Do not use an extension cord with this product. POLARIZED PLUG: This appliance has a polarized plug, (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. D
Resumen del contenido incluido en la página 6
Your product may vary slightly from illustration. Parts Identification Water Chamber Lid Water Chamber Filter Basket (P/N 31062) with Water Level Indicator Filter Basket Holder Mug Lid(s) (P/N 30909) Flow Nozzle (P/N 31063) FIGURE B Thermal Mugs Drip Tray (P/N 30911) (P/N 31064) Overflow Tray (P/N 31065) Base FIGURE A Power Switch with FIGURE C Indicator Light FIGURE D 6
Resumen del contenido incluido en la página 7
Brewing 1. Plug into 120V ~ 60 Hz outlet. 2. Make sure unit is in the OFF position. The Indicator Light will be off. IMPORTANT: Place coffee maker on a level surface. 3. Markings on the Water Level Indicator indicate the amount of water required to brew the desired number of Thermal Mugs. Lift up the hinged Water Chamber Lid and fill to desired level with cold, fresh water for the number of Thermal Mugs (one or two), using the Water Level Indicator on the Water Window. WARNING: When making one T
Resumen del contenido incluido en la página 8
Helpful Hints for Brewing • Always use fresh, cold water for brewing. In areas with hard water or where water contains a high mineral content, use cold filtered water for optimal coffee taste. ® ® • For best results, use Melitta #2 paper cone filters and Melitta Premium Fine Grind Roast Coffee. • The markings on the Water Level Indicator reflect the quantity of fresh water to be used. The quantity of brewed coffee is less because the coffee grounds absorb water. Care and Cleaning 1. Make sure Po
Resumen del contenido incluido en la página 9
Descaling We recommend that you descale your coffee maker once a month because mineral deposits can form a coating in the coffee maker, causing slower brewing time and possibly an off flavor in the coffee. Use a cleaner recommended for coffee makers. To descale your unit: 1. Pour two ounces of vinegar or coffee cleaner into the Water Chamber. Add cold water to the level 2 indicator. 2. Place a clean #2 paper cone filter in the filter basket and close Water Chamber Lid. Place both Mugs in proper
Resumen del contenido incluido en la página 10
IMPORTANT NOTICE If any parts are missing or defective, DO NOT return this product. Please call our Customer Relations Department for assistance. 800-233-9054 Monday - Friday 9am - 5pm CST LIMITED ONE YEAR WARRANTY ® Warranty: This Melitta product is warranteed by Salton, Inc. to be free from defects in materials or workmanship for a period of (1) year from the original purchase date. This product warranty covers only the original consumer purchaser of the product. Warranty Coverage: This warra
Resumen del contenido incluido en la página 11
For Products Purchased in the USA, but Used in Canada: You may return the product insured, packaged with sufficient protection, and postage and insurance prepaid to the USA address listed below. Please note that all customs duty / brokerage fees, if any, must be paid by you and we will require you to pay the cost of customs duty / brokerage fees to us in advance of our performing any service. Risk During Shipment: We cannot assume responsibility for loss or damage during incoming shipment. For y
Resumen del contenido incluido en la página 12