Manual de instrucciones de Giant GP7155-5100

Resumen del contenido incluido en la página 1

Triplex Ceramic
Plunger Pump Manual
Model
GP7155-5100
Contents:
Installation Instructions: page 2
Preventive Maintenance
and Spare Parts List: page2
Pump Specifications: page 3
Exploded View: page 4
Parts List/Kits: page 5
Repair Instructions: page 6
Dimensions: page 7
Warranty Information: back page

Resumen del contenido incluido en la página 2

INSTALLATION INSTRUCTIONS Installation of the Giant Industries, Inc., pump is not a further reduce system pulsation. Dampeners can also complicated procedure, but there are some basic steps reduce the severity of pressure spikes that occur in systems common to all pumps. The following information is to be using a shut-off gun. A dampener must be positioned considered as a general outline for installation. If you have downstream from the unloader. unique requirements, please contact Giant Ind

Resumen del contenido incluido en la página 3

Specifications - Model GP7155-5100 U.S. ........................................... Metric Volume .............................................................................. 65.8 GPM .................................. 250 LPM Discharge Pressure ........................................................... 1500 PSI .................................... 100 Bar Crankshaft Speed .................................................................................................................. 700 RP

Resumen del contenido incluido en la página 4

Exploded View - GP7155-5100 4

Resumen del contenido incluido en la página 5

Spare Parts List - GP7155-5100 ITEM PART DESCRIPTION QTY. ITEM PART DESCRIPTION QTY. 1 07600 Crankcase 1 39B 07723-0100 Compact Ring 3 2 13000 Oil Filler Plug Assembly 1 39C 07797-0100 Support Disc 3 4 07601 Crankcase Cover 1 39D 05218 Clip Ring 3 5 07602 Gasket, Crankcase Cover 1 41 05219 Sleeve Support Ring 3 8 07603 Oil Dip Stick 1 42 07711 V-Sleeve 9 9 01009 O-Ring, Dip Stick 1 43 07712-0100 Pressure Ring 3 10 13133 Hexagon Screw 12 45 05220 Pressure Spring 3 11 07109-0400 Spring Washer 12 4

Resumen del contenido incluido en la página 6

GP7155-5100 REPAIR INSTRUCTIONS 51C 57 51A 57 58 56 51 51E 51D To Check Valve Assemblies 2. Remove valve adapter (56) and To Check Seals & Plungers. 1. Loosen plugs (58), take out tension spring (57) with pull-out 3.Loosen nuts (49A) and remove tension spring (57) and then tool size 5. There is an O-ring pump head. CAUTION: Don't remove the complete valve (51G) under both the suction and loosen the 3 plunger connections assembly (51) with either a the discharge valve each of which (36A) before

Resumen del contenido incluido en la página 7

GP7150A, GP7155A, GP7255A SERIES DIMENSIONS - INCHES (mm) GP7155-5100 Pump Dimensions - Inches (mm) 7

Resumen del contenido incluido en la página 8

GIANT INDUSTRIES LIMITED WARRANTY Giant Industries, Inc. pumps and accessories are warranted by the manufacturer to be free from defects in workmanship and material as follows: 1. For portable pressure washers and self-service car wash applications, the discharge manifolds will never fail, period. If they ever fail, we will replace them free of charge. Our other pump parts, used in portable pressure washers and in car wash applications, are warranted for five years from the dateof shipment for a