Manual de instrucciones de Weider 831.150460

Resumen del contenido incluido en la página 1

PATENT PENDING
USER'S MANUAL
Model No. 831.150460
Serial No.
The serial number can be found in the
location shown below. Write the serial
number in the space above.
Serial Number Decal (under
CAUTION
Read all precautions and instruc-
tions in this manual before
using this equipment. Save this
manual for future reference.
SEARS, ROEBUCK AND CO., HOFFMAN ESTATES, IL 60179

Resumen del contenido incluido en la página 2

TABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 ADJUSTING THE WEIDER PR

Resumen del contenido incluido en la página 3

BEFORE YOU BEGIN ® Thank you for selecting the WEIDER PRO 120 HELPLINE at 1-800-736-6879, Monday through Weight Bench. The PRO 120 Weight Bench is Saturday, 7 a.m. until 7 p.m. Central Time (excluding designed to be used with your own weights (not holidays). To help us assist you, please note the prod- included) to develop several muscle groups. Whether uct model number and serial number before calling. your goal is a shapely figure, dramatic muscle size The model number is 831.150460. The seria

Resumen del contenido incluido en la página 4

ASSEMBLY Before beginning assembly, carefully read the • Tighten all parts as you assemble them, unless following information and instructions: instructed to do otherwise. • Place all parts in a cleared area and remove the • During assembly, make sure that all parts are ori- packing materials; do not dispose of the packing ented as shown in the drawings. materials until assembly is completed. • Read each assembly step before you begin. THE FOLLOWING TOOLS (NOT INCLUDED) ARE REQUIRED FOR ASSEMBLY

Resumen del contenido incluido en la página 5

1. Before beginning assembly, be sure that you 1 have read and understand the information on 8 the previous page. Press a 38mm x 38mm Inner Cap (16) into the end 3 Align these of the Frame (1). Press Two 50mm Round Outer Holes Caps (9) onto the Adjustment Leg (3). Press a 11 38mm x 50mm Inner Cap (8) into the end of the 1 Adjustment Leg. Align the indicated holes in the Frame (1) and the 16 Adjustment Leg (3). Attach the Adjustment Leg to 9 the Frame with two Lock Pins (11). 2. Align the indicat

Resumen del contenido incluido en la página 6

ADJUSTING THE WEIDER PRO 120 The weight bench is designed to be used with your own weights (not included). The steps below explain how the weight bench can be adjusted. Refer to the accompanying exercise poster for exercise information. Inspect and tighten all parts each time you use the weight bench. Replace any worn parts immediately. The weight bench can be cleaned with a damp cloth and a mild, non-abrasive detergent. Do not use solvents. ADJUSTING THE PIVOT LEG 1 To change the position of th

Resumen del contenido incluido en la página 7

PART LIST and R0996A EXPLODED DRAWING—Model No. 831.150460 Key Part Key Part No. Qty. No. Description No. Qty. No. Description 1 1 132209 Frame 10 2 132148 Pad Tube 2 1 132504 Pivot Leg 11 2 132505 Lock Pin 3 1 132506 Adjustment Leg 12 1 132210 Bench 4 2 111855 M6 x 48mm Bolt 13 1 012033 M10 Nylon Locknut 5 2 132137 M6 x 16mm Bolt 14 1 111084 M10 x 68mm Bolt 6 4 103805 Foam Pad 15 1 105977 “L” Pin 7 4 112402 3/4” Round Inner Cap 16 1 103833 38mm x 38mm Inner Cap 8 2 132142 38mm x 50mm Inner Cap

Resumen del contenido incluido en la página 8

® The model number and serial number of your WEIDER PRO 120 Model No. 831.150460 are listed on a decal attached to the frame. See the front cover of this manual to find the location of the decal. QUESTIONS? All replacement parts are available for immediate purchase or special order when you visit your nearest SEARS Service Center. If you find that: To request service or to order parts by telephone, call the toll-free numbers listed at the left. • you need help assembling or ® operating the WEID