Manual de instrucciones de Vector BD032806

Resumen del contenido incluido en la página 1

VEC415_Manual_NP_032806 4/18/06 12:20 PM Page 8
VEC415
TWO YEAR LIMITED WARRANTY PROGRAM
This limited warranty program is the only one that applies to this product, and it sets forth all the
responsibilities of Vector Manufacturing, regarding this product. There is no other warranty, other than
those described herein. Any implied warranty of merchantability or fitness for a particular purpose on
this product is limited in duration to the duration of this warranty.
This Vector Manufacturing pr

Resumen del contenido incluido en la página 2

VEC415_Manual_NP_032806 4/18/06 12:20 PM Page ii IMPORTANT SAFETY INSTRUCTIONS WARNINGS TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, EXPLOSION OR INJURY: • Do not connect to AC distribution wiring. • Remove appliance plug from outlet strip or turn off inverter before working on the appliance. Multiple outlet power strips with switches and circuit breakers only interrupt power to the “hot” receptacle terminals. The “neutral” terminals remain powered with respect to the “ground” terminals. • NO

Resumen del contenido incluido en la página 3

VEC415_Manual_NP_032806 4/18/06 12:20 PM Page iv TABLE OF CONTENTS Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Controls and Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 How This Inverter Works . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Resumen del contenido incluido en la página 4

VEC415_Manual_NP_032806 4/18/06 12:21 PM Page 2 Controls and Functions DC. The second stage is a MOSFET bridge stage that converts the high voltage DC into 115 volts, 60 Hz AC. The DC-to-DC converter stage uses creative, high frequency, zero voltage switching power conversion techniques that replace the bulky transformers found in less 1 technologically advanced models.The inverter stage uses advanced power MOSFET transistors in a full bridge configuration. Slim Power Inverter Output Waveform

Resumen del contenido incluido en la página 5

VEC415_Manual_NP_032806 4/18/06 12:21 PM Page 4 4. Rotate the plug slightly to make sure there is good contact. OPERATING INSTRUCTIONS 5. Push the ON/OFF pushbutton to turn the unit ON. Once properly connected to a 12 volt DC power source, the ON/OFF switch controls 6. The LED in the ON/OFF Pushbutton will light blue, indicating a proper connection. power to the unit. The bi-color LED indicator lights blue when the inverter is connected to DC power and the power pushbuton is set to ON. (If th

Resumen del contenido incluido en la página 6

VEC415_Manual_NP_032806 4/18/06 12:21 PM Page 6 Common Power Output Problems CARE AND MAINTENANCE Possible Causes Recommendations Storage Battery voltage Recharge battery or check 1. Ideal storage temperature range is 0-40°C (32-104°F). below 10.7 volts DC power supply. 2. Store and use the 100 Watt Slim Power Inverter in a cool, dry place with Equipment being operated Reduce load to maximum 100 watts. adequate ventilation for all-around air circulation. draws too much power 3. Avo