Manual de instrucciones de Universal Security Instruments MI5050

Resumen del contenido incluido en la página 1

MODEL MI3050, MI3050L
SECURITY INSTRUMENTS, INC.
MODEL MI5050, MI5050L
SMOKE & FIRE ALARM WITH SILENCE FEATURE
AND ALARM ORIGINATION FEATURE
READ ALL INSTRUCTIONS
This smoke alarm uses an extremely small amount of a radioactive
element in the ionization chamber. Do not tamper with radioactive sealed
source or try to repair the smoke alarm yourself.
Table of Contents:
Page #
Smoke Alarm Limitations and Functions ................................. 2
Recommended Location of Alarms ..................

Resumen del contenido incluido en la página 2

SMOKE ALARM LIMITATIONS AND FUNCTIONS   There are three basic smoke alarm types: IoPhic , Ionization and Photoelectric.  IoPhic is an ionization alarm containing a patent-pending Universal Smoke Sensing Technology.   IoPhic alarms are very effective at detecting fast flaming fires and also respond very quickly to slow smoldering fires - up to 87% faster than the maximum allowable alarm limit (UL217 Smoldering Smoke Test on 5/26/2010, Underwriters Laboratories Project #09CA38078). Ioniza

Resumen del contenido incluido en la página 3

RECOMMENDED LOCATION OF ALARMS  Locate the first smoke alarm in the immediate area of the bedrooms. Try to protect the escape route as the bedrooms are usually farthest from an exit. If more than one sleeping area exists, locate additional smoke alarms in each sleeping area. If a hall is more than 40 feet (12 meters) long, install a smoke alarm at each end.  Locate additional smoke alarms to protect any stairway as stairways act like chimneys for smoke and heat.  Locate at least one smoke ala

Resumen del contenido incluido en la página 4

AVOID THESE LOCATIONS  the garage – products of combustion are produced when you start your vehicle.  near appliances or areas where normal combustion regularly occurs (kitchens, near furnaces, gas hot water heaters). Use smoke alarms with photoelectric sensors or smoke alarms with Silence Feature for these areas.  in areas with high humidity, like bathrooms or areas near dishwashers or washing machines. Install at least 3 feet (0.9 meters) away from these areas.  in areas of turbulent air

Resumen del contenido incluido en la página 5

TO DEACTIVATE THE LOCKING FEATURES: To remove the smoke alarm for cleaning or servicing or to replace the battery, you must first remove the appropriate locking pin, if it has been installed. 1. Use long nose pliers to pull the locking pin out of the hole. 2. It is now possible to remove the smoke alarm or replace the battery. MOUNTING INSTRUCTIONS 1. Attach the mounting bracket in the proper location on the wall or ceiling (screws and anchors provided). 2. To activate 9 volt battery and alarm,

Resumen del contenido incluido en la página 6

NEVER use an open flame of any kind to test this smoke alarm. You might accidentally damage or set fire to the smoke alarm or to your home. The built-in test switch accurately tests the smoke alarm's operation as required by Underwriters Laboratories Inc. (UL). (UTHA) Sensitivity Indicating Means The sensitivity indicating means for this Smoke and Fire Alarm is the use of the analyzer for Smoke Detectors Model 501-A or 501-A/Bat Aerosol Generator Manufactured by Gemini Scientific Corp., 1122-B A

Resumen del contenido incluido en la página 7

DEVELOP AND PRACTICE A PLAN OF ESCAPE BASICS OF ESCAPE PLAN o Make a floor plan indicating all doors and windows and at least two escape routes from each room. Second story windows may need a rope or chain ladder. o Have a family meeting and discuss your escape plan, showing everyone what to do in case of fire. o Determine a place outside your home where all of you can meet if a fire occurs. o Familiarize everyone with the sound of the smoke alarm and train them to leave your home when they hear

Resumen del contenido incluido en la página 8

FCC PART 15 RADIO FREQUENCY DEVICES This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications, However, there is

Resumen del contenido incluido en la página 9

TEN YEAR LIMITED WARRANTY MODELS MI3050, MI3050L MODELS MI5050, MI5050L UNIVERSAL SECURITY INSTRUMENTS, INC./USI ELECTRIC, INC. ("USI") warrants your USI product to be free from defects in material and workmanship for a period of ten (10) years from the date of purchase. This warranty shall not apply to any batteries used in the product or to any damage which may be caused by such batteries. This warranty applies only to the original consumer purchaser and only to products used in normal residen