Manual de instrucciones de TDK NB-59S-09S-0

Resumen del contenido incluido en la página 1

(1/4)
Ultrasonic Nebulizer Units
Incorporate Type
NB Series
The TDK ultrasonic humidifier unit was the first such product in the geous from the standpoint of both health and reduced energy con-
world to be developed. There is an increasing need for indoor sumption.
humidification due to the proliferation of clean air heat pumps and In addition to such home uses, these ultrasonic humidifier units
central heating systems. have numerous advantages for humidification of vegetable show-
When the ap

Resumen del contenido incluido en la página 2

(2/4) NB-514S TYPE NB-59S-09S TYPE FEATURES FEATURES  Small size facilitates integration into various devices.  Compact, with highly reliable circuitry.  Complies with noise regulations in the Radio Law.  Separate transducer and drive circuit sections provide superior  Reduces harmonic component noise. layout versatility.  Parallel connection to one transformer is supported.  Provides DC.48V output (maximum 30mA, smoothing filter not SHAPES AND DIMENSIONS included). 1C 5 24±0.2 20±0.2 2-

Resumen del contenido incluido en la página 3

TU-51X-H 4123 (3/4) NB-80E-01 TYPE MOUNTINGS (Reference) FEATURES 1.NB-514S TYPE O-type  Compact, with highly reliable circuitry. ring  Separate transducer and drive circuit sections provide superior ø39.2±0.2 Chamber layout versatility. base  Because the ultrasonic frequencies used are higher than with typical household-type units, mist particle size is extremely fine. This part is thus ideal for products intended for smaller spaces. SHAPES AND DIMENSIONS Transducer 43.5max. ∗ 7 for

Resumen del contenido incluido en la página 4

(4/4) PRECAUTIONS  These units are readily damaged by operation when empty (without water). Therefore a means (float switch, etc.) should be provided to assure operation does not occur when empty.  Contact TDK prior to use of this unit for applications utilizing liquids other than water.  The unit should be used only after sufficient consideration of the product specifications for that specific unit.  When using units in parallel, make sure that voltage differences do not occur between