Resumen del contenido incluido en la página 1
R
MODEL
ISSUE EMD-EU1717
2ZZ9020098
Resumen del contenido incluido en la página 2
WARNING: The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. NOTICE FEDERAL EMISSION COMPONENT DEFECT WARRANTY and CALIFORNIA EMISSION CONTROL WARRANTY are applicable to only those engines complied with EPA (Environmental Protection Agency) and CARB (California Air Resources Board) emission regulations in the U.S.A. NOTICE To the engines exported to and used in the countries other than the U.S.A., wa
Resumen del contenido incluido en la página 3
FEDERAL EMISSION COMPONENT DEFECT WARRANTY EMISSION COMPONENT DEFECT WARRANTY COVERAGE This emission warranty is applicable in all States, except the State of California. Fuji Heavy Industries Ltd. and Robin America Inc., Wood Dale Illinois, (herein "ROBIN AMERICA") warrant to the initial retail purchaser and each subsequent owner, that this utility equipment engine (herein "engine") was designed, built, and equipped to conform at the time of initial sale to all applic- able regulations of the
Resumen del contenido incluido en la página 4
*Consequential damages such as loss of time, inconvenience, loss of use of the engine of equip- ment, etc. *Diagnosis and inspection charges that do not result in warranty-eligible service being performed. *Any non-authorized replacement part, or malfunction of authorized parts due to use of non-autho- rized parts. OWNER’S WARRANTY RESPONSIBILITIES As the engine owner, you are responsible for the performance of the required maintenance listed in your owner's manual, ROBIN AMERICA recommends tha
Resumen del contenido incluido en la página 5
CALIFORNIA EMISSION CONTROL WARRANTY STATEMENT YOUR WARRANTY RIGHTS AND OBLIGATIONS The California Air Resources Board and Fuji Heavy Industries Ltd. are pleased to explain the emission control system warranty on your 2000 and later Small Off-Road engine(herein "engine"). In California, the engines must be designed, built and equipped to meet the State's stringent anti-smog standards. Fuji Heavy Industries Ltd. must warrant the emission control system on your engine for the periods of time desc
Resumen del contenido incluido en la página 6
LIMITED WARRANTY on Emission Control Systems - California Only - Fuji Heavy Industries Ltd. warrant to the owner of the 2000 and later engine that the engine (1) has been designed, built and equipped so as to conform at the time of manufacture with the applicable regulations of the California Air Resources Board, and (2) is free from defects in materials and workmanship which cause it to fail to conform with those regulations as may be applicable in the terms and conditions stated below; A. WAR
Resumen del contenido incluido en la página 7
(2) improper installation, adjustment or repair of the engine or of any warranted part unless performed by an authorized dealer. (3) failure to follow recommendations on fuel use contained in the 2000 and later Owner's Manual. (4) repairs performed outside of the authorized warranty service facility. (5) use of parts, which are not authorized by Fuji Heavy Industries Ltd.. 2. Add-on or modified parts This warranty does not cover any part which malfunctions, fails or is damaged due to alteration
Resumen del contenido incluido en la página 8
(2) Ignition System (i) Spark plug (ii) Flywheel magneto (iii) Ignition coil (3) Miscellaneous Items Used in Above Systems (i) Hoses and sealing gaskets, bolts, connectors, and assemblies. I. MAINTENANCE STATEMENTS It is your responsibility to have all scheduled inspection and maintenance services performed at the times recommended in the 2000 and later Owner's Manual and to retain proof that inspection and maintenance services are performed at the times when recommended. Fuji Heavy Indus- trie
Resumen del contenido incluido en la página 9
FOREWORD Thank you very much for purchasing a ROBIN ENGINE. Your ROBIN ENGINE can supply the power to operate various sorts of machines and equipment. Please take a moment to familiarize yourself with the proper operation and maintenance procedures in order to maximize the safe and efficient use of this product. Due to constant efforts to improve our products, certain proce- dures and specifications are subjected to change without notice. When ordering spare parts, always give us the MODEL, SP
Resumen del contenido incluido en la página 10
CONTENTS 1.SAFETY PRECAUTIONS 1 2. COMPONENTS 4 3. PRE-OPERATION CHECKS 6 4. OPERATING YOUR ENGINE 7 5. EASY TROUBLESHOOTING 9 6. MAINTENANCE SCHEDULE 11 7. "HOW-TO" MAINTENANCE 13 8. PREPARATIONS FOR STORAGE 17 9. SPECIFICATIONS 18
Resumen del contenido incluido en la página 11
SYMBOLS Read the owner's manual. Stay clear of the hot surface. Exhaust gas is poisonous. Do not operate in an unventilated area. Stop the engine before refueling. Fire, open flame and smoking prohibited. Plus ; On (Run) positive polarity Off (Stop) Battery Engine start Engine oil (Electric start) Add oil
Resumen del contenido incluido en la página 12
1. SAFETY PRECAUTIONS Please make sure you review each precaution carefully. EXHAUST PRECAUTIONS NNever inhale exhaust gasses. They contain carbon monoxide, a colorless, odorless and extremely dangerous gas which can cause unconsciousness or death. Never operate the engine indoors or in a poorly ventilated area, such as tunnel, cave, etc. Exercise extreme care when operat- ing the engine near people or animals. Keep the exhaust pipe free of foreign objects. REFUELING PRECAUTIONS Be sure to sto
Resumen del contenido incluido en la página 13
PROTECTIVE COVER Place the protective covers over the rotating parts. If rotating parts such as the drive shaft, pulley, belt, etc. are left exposed, they are potentially hazardous. To prevent injury, equip them with protective covers or shrouds. Be careful of hot parts. The muffler and other engine parts become very hot while the engine is running or just after it has stopped. Operate the engine in a safe area and keep children away from the running engine. Never make adjustments on the machin
Resumen del contenido incluido en la página 14
Drain the fuel when transporting the engine. Do not move the engine while in operation when it has been removed from the equipment. Keep the unit dry (do not operate it in rainy conditions). PRE-OPERATION CHECKS. Carefully check fuel hoses and joints for looseness and fuel leakage. Leaked fuel creates a potentially dangerous situation. Check bolts and nuts for looseness. A loose bolt or nut may cause seri- ous engine trouble. Check the engine oil and refill if necessary. Check the fuel level an
Resumen del contenido incluido en la página 15
2. COMPONENTS EH025 Plug cover Air cleaner Stop switch Clutch Fuel tank cap Fuel tank Choke lever Muffler Carburetor Primer pump Oil gauge ( ) Oil filler Starter handle Engine serial No. Recoil starter - 4 -
Resumen del contenido incluido en la página 16
EH035 Plug cover Air cleaner Clutch Fuel tank cap Fuel tank Carburetor Choke lever Muffler Primer pump Starter handle Oil gauge (Oil filler) Recoil starter - 5 -
Resumen del contenido incluido en la página 17
3. PRE-OPERATION CHECKS CHECK ENGINE OIL Before checking or refilling engine oil, be sure the engine is located on a stable, level surface and stopped. Do not thread the gauge into oil filler to check oil level. If the oil level is below the lower level line on the dipstick, refill with the proper oil (see table) up to the upper level (up to the point of overflowing the filler neck). OIL CAPACITY EH025 : 80 mL EH035 : 100 mL Change oil if it is contaminated. (See page 11 Maintenance S
Resumen del contenido incluido en la página 18
4. OPERATING YOUR ENGINE STARTING STOP SWITCH PRIMER PUMP 1 3 ON ON OFF Set the throttle lever to the idling position. If the stop switch is installed on the engine.Set the stop switch to the Push the primer pump 7 to 10 times position "ON or I ". to feed the fuel to the carburetor. If the stop switch is installed on a machine side.Set the stop switch to the position "ON or I ". CHOKE LEVER RECOIL STARTER 2 4 Pull the starter handle slowly, until resistance is felt. This is the "compression"
Resumen del contenido incluido en la página 19
STOPPING STOP SWITCH CHOKE LEVER 1 5 ON OFF OFF Set the throttle lever at the low speed position and allow the engine to run at low speed for 2 or 3 minutes before stopping. If the stop switch is installed on the After starting the engine, gradually engine.Set the stop switch to the position "OFF or O ". open choke by turning the choke lever and finally keep it fully If the stop switch is installed on a opened. machine side.Set the stop switch to the position "OFF or O ". Do not fully open the
Resumen del contenido incluido en la página 20
5. EASY TROUBLESHOOTING WHEN ENGINE DOES NOT START: Perform the following checks before you take the engine to your Robin dealer. If you still have trouble after complet- ing the checks, take the engine to your nearest Robin dealer. Is the engine switch set ON? Is there enough compres- sion? 1. Pull the starter handle slowly and check if resistance is felt. 2. If little force is required to pull the starter handle, check if the spark plug is tightened firmly. 3. If the spark plug is loose, tigh
