Resumen del contenido incluido en la página 1
OWNER’S MANUAL
40” LAWN AERATO R
MODEL:
SAT- 40 BH
• Assembly
• Installation
• Operation
• Repair Parts
For the latest product updates & setup tips:
Visit us on the web! Important: This manual contains information for the safety of
persons and property. Read it carefully before assembly and
www.brinly.com
operation of the equipment!
L-1643BH-D
Resumen del contenido incluido en la página 2
INTRODUCTION CONGRATULATIONS on the purchase of your new Brinly-Hardy Lawn Aerator! Your lawn aerator is designed, engineered and manufactured to give you the best possible dependability and performance. CUSTOMER RESPONSIBILITIES Please read and retain this manual. The instructions enables you to assemble and maintain your lawn aerator properly. And please, always observe the “Safety” instructions. TABLE OF CONTENTS SAFETY ....................................................................
Resumen del contenido incluido en la página 3
SAFETY TO HELP PREVENT BODILY INJURY DUE TO LOSS OF TOWING SAFELY STABILITY OR CONTROL: • Stopping distance increases with speed and weight of • Do not exceed maximum towing capacity of towing vehicle towed load. Travel slowly and allow extra time and distance to stop. listed in the vehicle operator's manual. • Do not tow this machine behind a motor vehicle such as a • Total towed weight must not exceed limits specified in tow- ing vehicle operator's manual. car, truck or ATV. • Towing th
Resumen del contenido incluido en la página 4
PARTS REFERENCE TOOLS REQUIRED FOR ASSEMBLY: • 1 - Pair of work gloves • 1 - Pair of pliers EXPLODED VIEW • 1 - Screwdriver (flat blade) • 2 - 7/16” Wrenches • 1 - 1/2” Wrench 2 • 2 - 3/4” wrenches 13 5 13 11 3 29 16 29 15 16 15 14 4 18 19 10 15 1 15 16 24 16 12 15 16 17 8 6 17 28 25 26 22 27 21 7 27 23 20 23 9 PARTS LIST REF PART NO. DESCRIPTION QTY. REF PART NO. DESCRIPTION QTY. 1. R-821-10 Drawbar Clevis 1 15. 30M1000P Hex Nut, 5/16” 11 2. B-5925 Logo Decal 1 16. 40M1000P
Resumen del contenido incluido en la página 5
ASSEMBLY Step 1. ATTACH END PANELS TO TRAY 1a) Attach the two End Panels (5) to the Tray (3) using six 5/16” x3/4” Rd Hd. Screws (13), 5/16” Flat Washers (29), 5/16” Lock Washers 5 (16) and 5/16” Hex Nuts (15), as shown. 16 15 29 16 29 13 5/16” Flat Washer 5/16” Lock Washer Qty. 6 Qty. 6 3 13 15 5/16” x 3/4” Rd Hd Screw 5/16” Hex Nut Qty. 6 Qty. 6 Step 2. INSTALL DRAWBAR 15 4 2a) Install Drawbar (4) to 16 1 Tray (3) using two 5/16” x3/4” 14 3 Rd Hd. Screws (13), 5/16” 5/16” x 1” Rd Hd Sc
Resumen del contenido incluido en la página 6
ASSEMBLY 6 Step 3. ASSEMBLE TINES TO AXLE 3a) Place a 5/8” Flat Washer, Thick 17 (17) onto the Axle Assembly (6), then slide it through the hole in End Panel (5 right Side) and add another Flat Washer Thick (17) if needed. 5 3b) Position the eleven Tines (7) and twenty-two Spacer/Bearing Tubes (27) onto the Axle Assembly (6) as follows: 17 28 • Bearing, small end first • Aerator Tine • Bearing, large end first Note: Round projections on Spacer/ Bearing flanges must fit into small hole
Resumen del contenido incluido en la página 7
ASSEMBLY Step 4. ATTACH HANDLE ASSEMBLY 4a) Attach the Handle Assembly (8) to end the of the Axle Assembly (6) by inserting one 1/4” x 1-1/4” Hex Bolt (25) though the hole in the end of the Axle Assembly) and secure with 1/4” Hex Nut(26), as shown. Note: The wheel bar mount on the Axle Assembly must be positioned downward, as shown, in order to properly attached the wheels. 4b) Slide the Handle Grip (10) on to the Handle Assembly (8). WHEEL BAR MOUNT 10 8 25 6 26 25 26 Hex Bolt, 1/4 x 1-1
Resumen del contenido incluido en la página 8
ASSEMBLY Step 5. INSTALL WHEELS 4a) Attach one Wheel (9) to the Handle Assembly (8) and the other wheel to the wheel bar mount on the Axle (6). Secure to each side using hardware in the following order: 23 21 22 Flat Washer, 1/2” Lock Washer, 1/2” Hex Nut, 1/2” • 1/2” x 3” Hex Bolt (20) Qty. 4 Qty. 3 Qty. 4 • 1/2” Flat Washer (23) • Wheel (9) • 1/2” Flat Washer (23) • 1/2” Hex Bolt (21) • 1/2” Lock Washer (22) 20 • 1/2” Hex Bolt Hex Bolt 1/2” x 3” Qty. 2 Note: Attaching wheel without
Resumen del contenido incluido en la página 9
ASSEMBLY Step 6. MOUNTING & TRANSPORTING 6a) Attach Aerator to your towing vehicle using Drawbar Pin (18) and Hairpin Cotter (12) supplied. 6b) To place in Transport Position: • Pull FORWARD on Handle Assembly (8). • Pull out slightly and position over Transport Lock Pin (24). Aerator rests on wheels. CAUTION: Avoid damage to tines. Engage the transport wheels when crossing concrete or 18 asphalt driveways and walkways 6c) To place in Operating Position: 12 Pull OUT on Handle Assembly (re
Resumen del contenido incluido en la página 10
OPERATION INSTALLING YOUR AERATOR OPERATING CAUTION: Avoid injury! Make sure feet and CAUTION: Avoid injury! Avoid damage to tines. hands are clear of Tine Tips. Engage the transport wheels when crossing concrete or asphalt driveways and walkways. Avoid injury! Do not operate lift handle unless attachment is installed to towing vehicle Excessive towed load can cause loss of control on slopes. Stopping distance increases with speed and weight of towed load. Total towed weight must not exce
Resumen del contenido incluido en la página 11
SERVICE MAINTENANCE After the first 30 minutes of use check all fasteners for tightness. Tines are manufactured with galvanized steel to resist wear of abrasive soil. Striking objects can cause tines to curl or break. Contact our Customer Service Department to purchase replace- ment Tines (Part # B-5423). Aerator is essentially maintenance free. However as with any steel product, it can rust. Apply a light coat of oil on tines after use to prevent rust. For rust appearing on painted surfaces
Resumen del contenido incluido en la página 12
MANUFACTURER’S LIMITED WARRANTY FOR Pull Behind Accessories The limited warranty set forth below is given by Brinly-Hardy The provisions as set forth in this warranty provide the sole and exclusive remedy arising from the sale. Brinly-Hardy Co. Company with respect to new merchandise purchased and shall not be liable for incidental or consequential loss or dam- used in the United States, its possessions and territories. age including, without limitation, expenses incurred for substi- Brinly
