Resumen del contenido incluido en la página 1
Model No. 831.150330
Serial No.
Write the serial number in the
space above for reference.
WEIGHT BENCH EXERCISER
User’s Manual
Serial Number Decal (under seat)
• Assembly
• Adjustments
• Part List and Drawing
Patent Pending
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manu-
Sears, Roebuck and Co., Hoffman Estates, IL 60179
al for future reference.
Resumen del contenido incluido en la página 2
TABLE OF CONTENTS WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 ASSEMBLY . . . . . . . . . . . . . . . .
Resumen del contenido incluido en la página 3
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of serious injury, read the following important precautions before using the weight bench. 1. Read all instructions in this manual before 11. Make sure that the set screws attaching the using the weight bench. Use the weight Olympic weight adapters are properly tight- bench only as described in this manual. ened each time the adapters are used. 2. It is the responsibility of the owner to ensure 12. The weight bench is designed to support a that a
Resumen del contenido incluido en la página 4
BEFORE YOU BEGIN ® ® Thank you for selecting the versatile PROFORM reading this manual, call 1-800-4-MY-HOME C800 weight bench. The weight bench offers an (1-800-469-4663). To help us assist you, please note impressive array of weight stations designed to devel- the product model number and serial number before op every major muscle group of the body. Whether calling. The model number is 831.150330. The serial your goal is to tone your body, build dramatic muscle number can be found on a decal a
Resumen del contenido incluido en la página 5
ASSEMBLY • Place all parts in a cleared area and remove the Make Things Easier for Yourself packing materials. Do not dispose of the packing materials until assembly is completed. This manual is designed to ensure that the weight bench can be assembled successfully The following tools (not included) are required by anyone. Most people find that by setting for assembly: aside plenty of time, assembly will go smoothly. • Two adjustable wrenches Before beginning assembly, carefully read the • On
Resumen del contenido incluido en la página 6
3. Attach the Leg Lever Bracket (7) to the Bench 3 Frame (1) with two M10 x 81mm Button Bolts 7 (75) and two M10 Nylon Locknuts (69). 69 Lubricate Press two 50mm Square Inner Caps (17) into the 4 70 Leg Lever (4). Press a 25mm Round Inner Cap (20) into the indicated end of the Weight Tube (11). 17 1 Attach the Weight Tube (11) to the Leg Lever (4) 24 with an M8 x 63mm Button Bolt (71), two M8 72 75 Washers (73), a 13mm Spacer (25), and an M8 73 25 Nylon Locknut (72). 20 Press a 25mm Round Angled
Resumen del contenido incluido en la página 7
6. Insert the Backrest Bracket (10) through the slot 6 in the Bench Frame (1) and under the Adjustment Lever (8). Make sure that the M10 x 65mm Flat 6 Head Screw (77) is under the Backrest Bracket arm. 69 67 77 Lubricate an M10 x 155mm Button Bolt (85) with grease. Attach the Backrest Tubes (6) to the Bench Frame (1) with the Bolt, two M10 Washers (67), and an M10 Nylon Locknut (69). Do not 1 overtighten the Locknut; the Backrest Tubes must be able to pivot easily. 67 85 8 10 Lubricate 7. Attach
Resumen del contenido incluido en la página 8
9. Slide a Pad Tube (50) into a hole in the Leg 9 Lever (4). Wet both sides of the Pad Tube with 54 7 52 soapy water. Slide two Large Foam Pads (51) 53 onto the Pad Tube as shown. Press two Large Pad Caps (53) into the Pad Tube. Repeat with the other Pad Tube and the Leg Lever. 51 82 4 Slide the Long Pad Tube (82) into the hole in the 52 Leg Lever Bracket (7). Wet both sides of the Pad 50 Tube with soapy water. Slide two Small Foam Pads (52) onto the Tube as shown. Press two 50 Small Pad Caps (5
Resumen del contenido incluido en la página 9
12. Attach a Base Cap (9) and a Rear Support (29) to 12 the a Base (28) with two M10 x 93mm Button 29 Bolts (48), an M10 Washer (67), an M10 Nylon Locknut (69), an M10 Nylon Jamnut (26), and an M4 x 16mm Screw (58). Repeat this step with the other Base (28) and 48 Rear Support (29). 48 9 28 26 58 67 69 13. Attach a Base (28) to the Center Base (27) with 13 three M10 x 68mm Button Bolts (79), three M10 Washers (67), and two M10 Nylon Locknuts (69). Do not tighten the Locknuts yet. 27 Attach the o
Resumen del contenido incluido en la página 10
15. Using a rubber mallet, tap the left Rack Foot (35) 15 into the indicated Base (28). Attach the Foot to the Base with two M10 x 65mm Button Bolts (60), four M10 Washers (67), and two M10 Nylon Locknuts (69). Do not tighten the Locknuts yet. 31 Attach the Left Upright (31) to the Rear Support (29) with two M10 x 68mm Button Bolts (79) and two M10 Nylon Locknuts (69). Do not tighten the Locknuts yet. 79 69 Attach the right Rack Foot (not shown) and 29 Right Upright (not shown) in the same man-
Resumen del contenido incluido en la página 11
18. Press a Top Bracket Bushing (55) into the Top 18 Bracket (36). Using a rubber mallet, tap the Top 56 Bracket onto the Left Upright (31) and the Guide 67 Bar (32). 36 Attach the Top Bracket (36) to the Left Upright 55 (31) with two M10 x 65mm Button Bolts (60), four 60 M10 Washers (67), and two M10 Nylon Locknuts 67 (69). Do not tighten the Locknuts yet. 67 67 Attach the Top Bracket (36) to the Guide Bar (32) with an M10 x 30mm Button Screw (56) and an 32 69 M10 Washer (67). 31 Assemble the o
Resumen del contenido incluido en la página 12
ADJUSTMENTS This section explains how to adjust the weight bench. See the EXERCISE GUIDELINES on page 15 for impor- tant information about how to get the most benefit from your exercise program. Also, refer to the accompanying exercise guide to see the correct form for each exercise. Make sure all parts are properly tightened each time the weight bench is used. Replace any worn parts immediate- ly. The weight bench can be cleaned with a damp cloth and a mild, non-abrasive detergent. Do not use
Resumen del contenido incluido en la página 13
USING THE BENCH FOR PRESS EXERCISES To prevent the weight rack from tipping while perform- ing press exercises on the bench, set the “L”-bracket (76) over the Center Base (27). 76 27 USING THE OLYMPIC WEIGHT ADAPTER Press a 48mm Round Inner Cap (16) into the Olympic Adapter (15). Attach the Olympic Adapter to the Weight Tube (11) with a 1/4” x 9.5mm Allen Head Set Screw (66). Make sure that the Set Screw is in the 11 bottom of the Adapter. 15 Press a 48mm Round Inner Cap (16) into a Weight Adap
Resumen del contenido incluido en la página 14
ATTACHING WEIGHTS TO THE BARBELL OR THE WEIGHT CARRIAGE 84 To use the barbell, slide the desired amount of weight 41 (not included) onto the Barbell Adapters (41). Secure the weights with the Large Weight Clips (84). WARNING: Do not place more than 62 310 pounds on the barbell. Always place the Weight same amount of weight on each side of the bar- Weight bell. Always secure weights with the Large Weight Clips (84). Your weights can be stored on the tubes on the Uprights (31 [not shown], 62) (se
Resumen del contenido incluido en la página 15
EXERCISE GUIDELINES THE FOUR BASIC TYPES OF WORKOUTS PERSONALIZING YOUR EXERCISE PROGRAM MUSCLE BUILDING Determining the exact length of time for each workout, To increase the size and strength of your muscles, as well as the number of repetitions or sets completed, push them close to their maximum capacity. Your mus- is an individual matter. It is important to avoid overdo- cles will continually adapt and grow as you progres- ing it during the first few months of your exercise pro- sively incre
Resumen del contenido incluido en la página 16
Rest for a short period of time after each set. The slowly as you stretch and do not bounce. Ease into ideal resting periods are: each stretch gradually and go only as far as you can • Rest for three minutes after each set for a muscle without strain. Stretching at the end of each workout building workout. is an effective way to increase flexibility. • Rest for one minute after each set for a toning work- out. STAYING MOTIVATED • Rest for 30 seconds after each set for a weight loss workout. For
Resumen del contenido incluido en la página 17
EXERCISE WEIGHT SETS REPS MONDAY Date: / / AEROBIC EXERCISE TUESDAY Date: / / EXERCISE WEIGHT SETS REPS WEDNESDAY Date: / / AEROBIC EXERCISE THURSDAY Date: / / EXERCISE WEIGHT SETS REPS FRIDAY Date: / / Make photocopies of this page for scheduling and recording your workouts. 17
Resumen del contenido incluido en la página 18
EXERCISE WEIGHT SETS REPS MONDAY Date: / / AEROBIC EXERCISE TUESDAY Date: / / EXERCISE WEIGHT SETS REPS WEDNESDAY Date: / / AEROBIC EXERCISE THURSDAY Date: / / EXERCISE WEIGHT SETS REPS FRIDAY Date: / / Make photocopies of this page for scheduling and recording your workouts. 18
Resumen del contenido incluido en la página 19
EXERCISE WEIGHT SETS REPS MONDAY Date: / / AEROBIC EXERCISE TUESDAY Date: / / EXERCISE WEIGHT SETS REPS WEDNESDAY Date: / / AEROBIC EXERCISE THURSDAY Date: / / EXERCISE WEIGHT SETS REPS FRIDAY Date: / / Make photocopies of this page for scheduling and recording your workouts. 19
Resumen del contenido incluido en la página 20
PART LIST—Model No. 831.150330 R0803A Key No. Qty. Description Key No. Qty. Description 1 1 Bench Frame 47 1 Curl Bar 2 1 Stabilizer 48 4 M10 x 93mm Button Bolt 3 1 Bench Leg 49 2 Weight Adapter 4 1 Leg Lever 50 2 Pad Tube 5 1 Curl Post 51 4 Large Foam Pad 6 2 Backrest Tube 52 2 Small Foam Pad 7 1 Leg Lever Bracket 53 4 Large Pad Cap 8 1 Adjustment Lever 54 2 Small Pad Cap 9 4 Base Cap 55 2 Top Bracket Bushing 10 1 Backrest Bracket 56 4 M10 x 30mm Button Screw 11 1 Weight Tube 57 2 M8 x
