Resumen del contenido incluido en la página 1
ESPAÑOL
ENGLISH FRANÇAIS
R
Instruction Manual
Manual de Instrucciones
Manuel d’Instructions
220LE/260LE
ForOccasionalUseOnly
WARNING:
Read and follow all Safety Rules and Operating Instructions before
using this product. Failure to do so can result in serious injury.
ADVERTENCIA:
Lea el manual de instrucciones y siga todas las advertencias e en-
strucciones de seguridad. El nohacerlo puede resultar enlesiones
graves.
AVERTISSEMENT:
Lire le manuel d’instructions et bien respecter tous les avertis
Resumen del contenido incluido en la página 2
IDENTIFICATION OFSYMBOLS Read and understand the WARNING! This chain instruction manual before saw can be dangerous! Care- using the chain saw. less or improper use can cause serious or even fatal injury. Always wear appropriate ear protection, eye protection and head protection. Always use two hands when operating the chain saw. WARNING! Contacting the guide bar tip with any object should be avoided; tip contact may cause the guide bar to move suddenly upward and backward, which may cause se- r
Resumen del contenido incluido en la página 3
S Carefully plan your sawing operation in ad- marked container for all fuel purposes. vance. Do not start cutting until you have a Wipe up all fuel spills before starting saw. clear work area, secure footing, and, if you S Move at least 10 feet (3 meters) from fuel- are felling trees, a planned retreat path. ing site before starting engine. S Turn the engine off and let saw cool in a OPERATE YOUR SAW SAFELY non-combustible area, not on dry leaves, S Do not operate a chain saw with one hand. stra
Resumen del contenido incluido en la página 4
Avoid Obstructions Elbow locked Clear The Working Area Thumb on underside of REDUCE THE CHANCE OF handlebar KICKBACK S Keep a good, firm grip on the saw with both S Recognize that kickback can happen. hands when the engine is running and With a basic understanding of kickback, don’t let go. A firm grip will help you reduce you can reduce the element of surprise kickback and maintain control of the saw. which contributes to accidents. Keep the fingers of your left hand encir- S Never let the movi
Resumen del contenido incluido en la página 5
action may push the guide bar rapidly back Symmetrical Guide Bar toward the operator. Either of these events may cause you to lose control of the saw which could result in serious injury or even death. DO NOT RELY UPON ANY OF THE DEVICES BUILT INTO YOUR SAW. YOU Large Radius Tip SHOULD USE THE SAW PROPERLY AND S Low--Kickback Chain, designed with a CAREFULLY TO AVOID KICKBACK. Re- contoured depth gauge and guard link duced--kickback guide bars and low--kick- which deflect kickback force and allo
Resumen del contenido incluido en la página 6
The chain is sharp and can cut you even when NOTE: If this saw is to be used for commer- it is not moving! cial logging, a chain brake is required and shall 1. Loosen and remove the chain brake nuts not be removed or otherwise disabled to com- and the chain brake from the saw. ply with Federal OSHA Regulations for Com- 2. Remove the plastic shipping spacer (if mercial Logging. present). SAFETY NOTICE: Exposure to vibrations through prolonged use of gasoline powered hand tools could cause blood v
Resumen del contenido incluido en la página 7
Depth Gauge Adjusting the tension: Cutters Chain tension is very important. Chain stretches during use. This is especially true during the first few times you use your saw. Always check chain tension each time you use and refuel your saw. An adjusting screw (located on the guide bar ) is used to adjust the tension of the chain (see Drive Links illustration). 6. Place the chain over and behind the 1. Turn adjusting screw clockwise until clutch, fitting the drive links in the clutch chain solidly
Resumen del contenido incluido en la página 8
OPERATION KNOW YOUR SAW READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR CHAIN SAW. Compare the illustrations with your unit to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference. Chain Front Hand Guard Front Handle Adjustment Tool (Bar Tool) Starter Rope ON/STOP Switch Muffler Chain Primer Bulb Starter Bar Oil Fill Cap Housing Fuel Mix Fill Cap Cylinder Cover Chain Throttle Direction Lockout Adjusting Rear of
Resumen del contenido incluido en la página 9
FUELING & LUBRICATION STARTING The chain must not WARNING: WARNING: Remove fuel cap slow- move when the engine runs at idle speed. If ly when refueling. the chain moves at idle speed refer to CAR- BURETOR ADJUSTMENT within this FUELING ENGINE manual. Avoid contact with the muffler. A hot This engine is certified to operate on muffler can cause serious burns. unleaded gasoline. Before operation, To stop the engine move the ON/STOP gasoline must be mixed with a good quality switch to the STOP posi
Resumen del contenido incluido en la página 10
S If the brake is already activated, it is disengaged by pulling the front hand guard ON/STOP back toward the front handle as far as Switch possible. S When cutting with the saw, the chain brake Primer must be disengaged. Bulb Disengaged ON/STOP SWITCH Engaged ON STOP CHOKE/FASTIDLE LEVER (SIDE VIEW) Braking function control CAUTION: The chain brake must be checked several times daily. The engine must be running when performing this proce- dure. This is the only instance when the saw should be p
Resumen del contenido incluido en la página 11
S Keep the engine at full speed the entire FELLING LARGE TREES time you are cutting. (6 inches in diameter or larger) S Allow the chain to cut for you. Exert only The notch method is used to fell large trees. light downward pressure. If you force A notch is cut on the side of the tree in the de- the cut, damage to the bar, chain, or en- sired direction of fall. After a felling cut is gine can result. made on the opposite side of tree, the tree S Release the throttle trigger as soon as will tend
Resumen del contenido incluido en la página 12
S DO NOT cut down a partially fallen tree with your saw. Be extremely cautious with Never turn saw upside WARNING: partially fallen trees that may be poorly down to undercut. The saw cannot be con- supported. When a tree doesn’t fall com- trolled in this position. pletely, set the saw aside and pull down the Always make your first cut on the compres- tree with a cable winch, block and tackle, sion side of the log. The compression side of or tractor. the log is where the pressure of the log’s CUT
Resumen del contenido incluido en la página 13
Usingasupport stand PRUNING nd 2 Cut WARNING: Limit pruning to limbs shoulder height or below. Do not cut if branches are higher than your shoulder. Get a professional to do the job. S Make your fist cut 1/3 of the way through the bottom of the limb. st 1 Cut S Next make a 2nd cut all the way through the limb. Then cut a third overcut leaving a 1 to 2 inch collar from st the truck of the tree. 1 Cut nd 2 Cut Second cut Third cut LIMBING AND PRUNING Collar WARNING: Be alert for and guard First cu
Resumen del contenido incluido en la página 14
1. Loosen 3 screws on cylinder cover. Outlet Cover BACK VIEW OF 2. Remove cylinder cover. MUFFLER 3. Remove air filter. 4. Clean the air filter using hot soapy water. Muffler Rinse with clean cool water. Air dry com- Screws pletely before reinstalling. 5. Lightly oil air filter before installing to im- prove the efficiency of air filter. Use Spark Arresting 2--cycle engine oil or motor oil (SAE 30). Screen Squeeze excess oil from filter. 6. Reinstall air filter. 7. Reinstall cylinder cover and 3
Resumen del contenido incluido en la página 15
4. Remove spark plug from cylinder and dis- BAR MAINTENANCE card. If your saw cuts to one side, has to be forced 5. Replace with Champion RCJ--7Y spark through the cut, or been run with an improper plug and tighten securely with a 3/4 inch amount of bar lubrication it may be necessary socket wrench. Spark plug gap should to service your bar. A worn bar will damage be 0.025 inches. your chain and make cutting difficult. 6. Reinstall the spark plug boot. After each use, ensure ON/STOP switch is in
Resumen del contenido incluido en la página 16
TROUBLESHOOTING TABLE WARNING: Always stop unit and disconnect spark plug before performing all of the recommended remedies below except remedies that require operation of the unit. TROUBLE CAUSE REMEDY Engine will not 1. Move ignition switch to ON. 1. Ignition switch off. start or will run 2. See “Difficult Starting” in 2. Engine flooded. only a few Operation Section. seconds after 3. Fuel tank empty. 3. Fill tank with correct fuel mixture. starting. 4. Install new spark plug. 4. Spark plug not
Resumen del contenido incluido en la página 17
U.S.EPA/CALIFORNIA/ENVIRONMENT CANADA EMISSION CONTROL WARRANTY STATEMENT YOUR WARRANTY RIGHTS AND OBLIGA- warranty shall be for a period of two years from TIONS: The U.S. Environmental Protection the initial date of purchase. WHAT IS COV- Agency, California Air Resources Board, Envi- ERED: REPAIR OR REPLACEMENT OF ronment Canada and ELECTROLUX HOME PARTS. Repair or replacement of any war- PRODUCTS, INC., are pleased to explain the ranted part will be performed at no charge to emissions control
Resumen del contenido incluido en la página 18
The information on the product label indicates which standard your engine is certified. Example: (Year) EPA Phase 1 or Phase 2 and/or CALIFORNIA. This engine is certified to be emissions compliant for the following use: Moderate (50 hours) Intermediate (125 hours) Extended (300 hours) 18
