Resumen del contenido incluido en la página 1
Operator’s Manual
Walk-Behind Snow Thrower
Mfg. No. Description
1695722 Dual Stage Snow Thrower, 11.5 TP, 27 Inch
Manual Part No. 1737920
Revision B
Rev. Date 04/2009
Resumen del contenido incluido en la página 2
Thank you for purchasing this quality-built BRUTE snow thrower. We’re pleased that you’ve placed your confidence in the Murray brand. When operated and maintained according to the instructions in this manual, your Murray product will provide many years of dependable service. This manual contains safety information to make you aware of the hazards and risks associated with snow throwers and how to avoid them. This snow thrower is designed and intended only for snow throwing and is not intended f
Resumen del contenido incluido en la página 3
TABLE OF CONTENTS OPERATOR SAFETY.................................................................................... 4 FEATURES AND CONTROLS .......................................................................... 10 OPERATION ............................................................................................. 12 BEFORE OPERATING SNOW THROWER................................................................................. 12 CHECK THE TIRES ...........................................
Resumen del contenido incluido en la página 4
OPERATOR SAFETY Hazard Symbols and Meanings DANGER - Amputation Hazard The discharge chute contains a rotating Safety Alert – Identifies safety information about impeller to throw snow. Never clear or unclog hazards that can result in personal injury. the discharge chute with your hands. Fingers can quickly become caught and traumatic Operator’s Manual – Read and understand before amputation or severe laceration will result. performing any activity or running snow thrower. Always use a clean
Resumen del contenido incluido en la página 5
OPERATOR SAFETY Control Symbols on Equipment Read the Manual DANGER Oil Read, understand, and follow all the instructions on the snow thrower and in the operator’s manual before operating this unit. Fuel Forward Failure to observe the safet y instructions in this manual will result in death or serious injury. On Off Neutral • Be thoroughly familiar with the controls and the proper use of the snow thrower. • Make sure you are properly trained before operating the snow thrower. Choke Off Reve
Resumen del contenido incluido en la página 6
OPERATOR SAFETY Operation and Equipment Safety Fuel Handling DANGER DANGER Fuel and its vapors are extremely flammable and explosive. This snow thrower is only as safe as the operator. If it is misused, or not properly maintained, it can be dangerous. Always handle fuel with extreme care. Remember you are responsible for your safety and that of Failure to observe these safety instructions can cause a fire those around you. or explosion which will result in severe burns or death. • Keep the a
Resumen del contenido incluido en la página 7
OPERATOR SAFETY Moving Parts Children DANGER DANGER Keep hands, feet, and clothing away from rotating parts. Tragic accidents can occur if the operator is not alert to the Rotating parts can contact or entangle hands, feet, hair, presence of children. Children are often attracted to the unit clothing, or accessories. and the operating activity. Never assume that children will remain where you last saw them. Failure to observe these safety instructions will result in traumatic amputation or seve
Resumen del contenido incluido en la página 8
OPERATOR SAFETY Maintenance and Storage Engine Safety (Continued) WARNING WARNING This snow thrower must be properly maintained to ensure safe Starting engine creates sparking. operation and performance. Failure to observe the safety Sparking can ignite nearby flammable gases. instructions in this manual could result in death or serious Explosion and fire could result. injury. • When performing any maintenance or repairs on the snow thrower, shut OFF - the engine, disconnect spark plug wire, an
Resumen del contenido incluido en la página 9
OPERATOR SAFETY Look for this symbol to indicate important safety WARNING: If any safety decals become worn or damaged and pre cautions. This symbol indicates: “Attention! cannot be read, order replacement decals from your local dealer. Become Alert! Your Safety Is At Risk.” Before operating your snow thrower, read the safety decals as shown on your snow thrower. The cautions and warnings are for your safety. To avoid a personal injury or damage to your snow thrower, understand and follow al
Resumen del contenido incluido en la página 10
FEATURES AND CONTROLS NOTICE: Read this OPERATOR’S MANUAL and OPERATOR SAFETY before operating your snow thrower. Compare the illustrations with your SNOW THROWER to familiarize yourself with the location of various controls and adjustments. Save this manual for future reference. H A G F B D E C I STOP Engine Controls Figure 2 ENGINE AND SNOW THROWER CONTROLS ENGINE CONTROLS G. Fuel Tank and Cap A. Choke Control — Used to start a cold engine (see Figure 2). H. Oil Fill Cap B. Electric Start Bu
Resumen del contenido incluido en la página 11
FEATURES AND CONTROLS A C E H 1 2 B D G F Snow Thrower Controls Figure 3 B. Auger Drive Clutch Lever — Used to engage and disengage the F. Skid Shoe — Used to adjust ground clearance of auger housing. auger and impeller. To engage push down, to disengage release. G. Clean-Out Tool — Used to remove snow and debris from the dis- C. Traction Drive Clutch Lever — Used to propel snow thrower for- charge chute and the auger housing. ward or reverse. Push down to engage, release to disengage. TM H. Fr
Resumen del contenido incluido en la página 12
OPERATION BEFORE OPERATING SNOW THROWER NOTE: This snow thrower was shipped WITH OIL in the ■ ■ Check the fasteners. Make sure all fasteners are tight. engine. See “Before Starting Engine” instructions in the OPERATION section of this manual before starting engine. ■ ■ On electric start models, the unit was shipped with the starter cord plugged into the engine. Before operating, unplug the starter cord from the engine. CHECK THE TIRES Check tires for damage. Check the air pressure in the tires w
Resumen del contenido incluido en la página 13
OPERATION WARNING: The operation of any snow thrower can result in foreign objects being thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields before beginning snow thrower operation. We recommend standard safety glasses or Wide Vision Safety Mask over spectacles. OPERATE THE SNOW THROWER NOTE: Always release the traction control lever before moving the speed select lever. CAUTION: Operation with a Snow Cab. Wind may blow 6. Use the speed select l
Resumen del contenido incluido en la página 14
OPERATION TRACTION LOCK PINS The right traction wheel can be completely released using the locking pin (A A, Figure 6). This allows the unit to be easily moved with the engine off. A Traction Lock Pins Figure 6 CHECK THE OIL (BEFORE STARTING ENGINE) TEMPERATURE TYPE OF OIL 0°F (-18°C) and above S.A.E. 5W30 NOTE: The engine was shipped from the factory filled with oil. Check the level of the oil. Add oil as needed. 0°F (-18°C) and below S
Resumen del contenido incluido en la página 15
OPERATION FILL THE FUEL TANK WARNING: Gasoline is flammable. Always use caution when handling or storing gasoline. Turn This engine is certified to operate on gasoline. Exhaust Emission Control engine off and let engine cool at least two minutes before System: EM (Engine Modifications). removing the gas cap. Do not add gasoline to the fuel tank Fill the fuel tank with fresh, clean, unleaded regular, unleaded premium, or re- while snow thrower is running, hot, or when snow thrower formulated auto
Resumen del contenido incluido en la página 16
OPERATION 9. Electric Start: Depress the starter push button (A A, Figure 11). After you start the engine, first disconnect the extension cord from the wall receptacle and then from the power cord receptacle (B B). C B A A Inserting Safety Key Figure 9 Starting with Cord Handle Figure 10 7. Rewind Start: Firmly hold the starter cord handle (A A, Figure 10).
Resumen del contenido incluido en la página 17
OPERATION OPERATING TIPS CLEAR A CLOGGED DISCHARGE CHUTE 1. Most efficient snowthrowing is accomplished when snow is removed DANGER: Hand contact with the rotating impeller inside immediately after it falls. the discharge chute is the most common cause of injury 2. For complete snow removal, slightly overlap each swath previously taken. associated with snow throwers. Never clear or unclog 3. Snow should be discharged downwind whenever possible. discharge chute with your hands, or while engine is
Resumen del contenido incluido en la página 18
MAINTENANCE SERVICE RECOMMENDATIONS FIRST BEFORE EVERY EVERY EVERY BEGINNING BEFORE PROCEDURE 2 EACH OFTEN 5 10 25 EACH STORAGE HOURS USE HOURS HOURS HOURS SEASON Tighten all Screws and ✓ ✓ ✓ Nuts Check Traction Clutch Cable Adjustment (See ✓ ✓ Cable Adjustment) Check Auger Clutch Cable Adjustment (See ✓ ✓ ✓ Cable Adjustment) SNOW THROWER Adjust Drive Belts ✓ ✓ ✓ Lubricate Chains and Hex ✓ ✓ Shaft Lubricate Auger Shaft (See Shear Pin Replace- ✓ ✓ ment) Lubricate Free-Hand ✓ ✓ ✓ Linkage Oil, Chec
Resumen del contenido incluido en la página 19
MAINTENANCE LUBRICATE AUGER GEAR BOX The auger gear box is lubricated at the factory and should not require additional lubrication. If for some reason the lubricant should leak out, or if the auger gear box has been serviced, add Lubriplate GR132 Grease or equivalent. Maximum 3- 1/4 ounces, (92 grams) should be used. Remove filler plug (A A, Figure 14), once a year. If grease is visible, do not add. If grease is not visible, use a piece of fine wire, like a dipstick to check Lubricating Controls
Resumen del contenido incluido en la página 20
MAINTENANCE ENGINE MAINTENANCE A Check Crankcase Oil Level - Before starting engine and after each 8 hours of continuous use. Add the recommended motor oil as required. NOTE: Over filling the engine can affect performance. Tighten the oil fill cap securely to prevent leakage. Full Change Oil - Every 50 hours of operation or at least once a year, even if the snow thrower is not used for fifty hours. Use a clean, high quality detergent oil. Fill the crankcase to FULL line on dipstick (A A, Figure
