Resumen del contenido incluido en la página 1
CR9977
2 Band Auto Set Dual Alarm
Clock Radio
Please read this manual before use
cr9977 instruction book issue 2.PMD 1 3/16/2006, 2:09 PM
ROBERTS
Sound for Generations
Resumen del contenido incluido en la página 2
Contents Contents .............................................................................. 1 Time zones ....................................................................... 17 Controls ............................................................................ 2-5 Specifications ................................................................... 18 Switching on ........................................................................ 6 General ...........................................
Resumen del contenido incluido en la página 3
1 2 Controls (Top) 3 4 5 11 10 9 87 6 1. Up/Hi button 4. Snooze button 7. Alarm mode button 10. Alarm 2 button 2. Time button 5. Sleep button 8. Down/Low button 11. Alarm 1 button 3. Date button 6. Alarm days button 9. On/Off button If you need any further advice, please call our Technical Helpline on :- 2 020 8758 0338 (Mon-Fri) cr9977 instruction book issue 2.PMD 3 3/16/2006, 2:09 PM
Resumen del contenido incluido en la página 4
Controls (Front) 12 12 15 14 13 12. PM indicator 13. Low battery indicator 14. Tuning dial 15. Alarm 'On' indicator 3 cr9977 instruction book issue 2.PMD 4 3/16/2006, 2:09 PM
Resumen del contenido incluido en la página 5
Controls (Right side) 16 17 18 16. Tuning control 17. Wave band selector switch 18. Volume control If you need any further advice, please call our Technical Helpline on :- 4 020 8758 0338 (Mon-Fri) cr9977 instruction book issue 2.PMD 5 3/16/2006, 2:09 PM
Resumen del contenido incluido en la página 6
Controls (Base) 20 20. Battery compartment 5 cr9977 instruction book issue 2.PMD 6 3/16/2006, 2:09 PM
Resumen del contenido incluido en la página 7
Switching on 1. Place your clock radio on a flat surface. Plug the power cord into the wall socket and switch on. 2. After a few seconds the time, day and date will set automatically. Your clock radio is fitted with a long life back-up battery to maintain the factory set time, day and date. Your clock radio will automatically reset to the correct time should the power source be interrupted. It will also automatically adjust for summer/winter time. See section on Back-up battery on page 15 . Shou
Resumen del contenido incluido en la página 8
Setting the year manually 1. To set the year hold down both theTime and Date buttons. The display will change to show the year. 2 2. Whilst holding down the Time and Date buttons set the correct 1 year by using the Up or Down buttons. When the Time and Date buttons are released the display will revert to showing the time. 1 2 Setting the date manually 1. To set the date hold down the Date button. 2 2. Whilst holding down the Date button set the correct date using the Up or Down buttons. 2 1 7 cr
Resumen del contenido incluido en la página 9
Setting alarm times Your clock radio has two separate alarms which can be set to activate at different times. 1 1. Press and hold down the Alarm 1 or Alarm 2 buttons. 2. Whilst holding down the Alarm 1 or Alarm 2 buttons press the 2 Up or Down buttons to set the alarm time. Release the buttons when the correct alarm time is reached. The clock uses a 12 hour display with a PM indicator. Ensure that the correct 12 hour cycle is selected. 2 Setting alarm mode The alarms can be set to wake you by ei
Resumen del contenido incluido en la página 10
Setting alarm day Your clock radio has five different day options for each of the alarms. The Alarm days are: Weekdays only display shows 1-5 Weekends only display shows 6-7 Everyday display shows 1-7 Monday to Saturday display shows 1-6 Sunday only display shows 7-7 Weekday alarm 1. Press and hold down the Alarm 1 or Alarm 2 buttons (depending on which alarm you wish to set day for). 2 2. Whilst holding down Alarm 1 or Alarm 2 buttons repeatedly press 1 and release the Alarm Days button until d
Resumen del contenido incluido en la página 11
Weekend alarm 1. Press and hold down the Alarm 1 or Alarm 2 buttons (depending on which alarm you wish to set day for). 2. Whilst holding down Alarm 1 or Alarm 2 buttons repeatedly press 2 and release the Alarm days button until display shows 6-7. 1 3. The alarm will sound on Saturday and Sunday at the preset time for 1 hour. To switch off the alarm until the next day press the On/off button. 4. To switch off the alarms permanently press and hold down the Alarm 1 or Alarm 2 button. Whilst holdin
Resumen del contenido incluido en la página 12
Monday to Saturday alarm 1. Press and hold down the Alarm 1 or Alarm 2 buttons (depending on which alarm you wish to set day for). 1 2 2. Whilst holding down Alarm 1 or Alarm 2 buttons repeatedly press and release the Alarm days button until display shows 1-6. 3. The alarm will sound at the preset time for 1 hour. To switch off the alarm until the next day press the On/off button. 4. To switch off the alarms permanently press and hold down the Alarm 1 or Alarm 2 button. Whilst holding down the A
Resumen del contenido incluido en la página 13
Checking alarm times 1. Press and hold down either Alarm 1 or Alarm 2 buttons depending which alarm you want to check. The display will change from normal time to alarm time. Release the Alarm 1 or Alarm 2 buttons to return to normal time. To adjust the alarm time refer to instructions 1 on pages 8 - 9. Checking alarm mode 1. Press and hold down either Alarm 1 or Alarm 2 buttons depending which alarm you want to check. 2 1 2. Whilst holding down Alarm 1 or Alarm 2 buttons press the Alarm mode b
Resumen del contenido incluido en la página 14
Snooze control 1. The radio or buzzer alarm can be silenced for approximately 9 minutes by pressing the Snooze button. This sequence can be repeated during the 60 minute alarm period. 1 Sleep timer 2 You can program your clock radio to play the radio for up to 90 minutes and then switch off. 1 1. Press the Sleep button. The display will show the sleep time. 2 2. To increase or decrease the amount of time the radio will play before switching off, hold down the Sleep button and increase or decreas
Resumen del contenido incluido en la página 15
Listening to the radio 1. Switch on the radio by pressing the On/Off button. 2. Select the required waveband using the Waveband switch. 1 2 3. Tune in to the desired station using the Tuning control. 4. Adjust volume using the Volume control. 5. The Wire aerial located on the rear of your clock radio is for FM reception. The wire should be fully extended and positioned for optimum reception. For MW reception there is a built in ferrite aerial. Rotate your clock radio to the position giving bes
Resumen del contenido incluido en la página 16
Dimmer switch 1 The Dimmer switch on your clock radio will allow you to adjust the intensity of the clock display to suit room brightness. 1. Use the High or Low buttons to adjust the intensity of the display. 1 Back-up battery As with all batteries, eventually the built in lithium battery will need to be replaced. A number of factors, such as the length of time between the date your clock radio was manufactured and the date you plugged it in for the first time, determine the amount of time befo
Resumen del contenido incluido en la página 17
Changing the back-up battery 1. Purchase a replacement lithium backup battery type CR2032 or equivalent. 2. Remove the new battery from its packaging so that it is ready to install. 3. Important: Maintain connection to AC mains supply during battery replacement. This will provide power whilst the original battery is removed. 4. Use a small screwdriver to remove the small screw securing the battery holder on cabinet base. 5. Remove the battery holder from cabinet. 6. Remove old battery from holde
Resumen del contenido incluido en la página 18
Time Zones Your clock radio is set to UK time zone 12 GMT (UTC). Should you wish to take your clock radio to other countries the time zone will need to be reset. 1. Press and hold down the Alarm mode button - the display will show the time zone currently selected e.g. 12. 1 2. Whilst holding down the Alarm mode button adjust the time zone using the Up or Down buttons. See following table for details of time zones and their offsets relative to GMT. Zone Offset (Hours) Zone Offset (Hours) 00 GMT +
Resumen del contenido incluido en la página 19
Specifications Circuit features Power Requirements Loudspeaker 8 ohms Mains AC 230 volts, 50Hz only Back-up Battery 1 x CR2032 Lithium (3 - 5 year life) Output power 180mW Frequency Coverage Aerial System FM Wire Aerial FM 87.5 - 108MHz MW 515 - 1635 kHz MW Built-in Ferrite aerial The Company reserves the right to amend the specification without notice. If you need any further advice, please call our Technical Helpline on :- 18 020 8758 0338 (Mon-Fri) cr9977 instruction book issue 2.PMD 1
Resumen del contenido incluido en la página 20
General Fuse Do not allow this unit to be exposed to moisture (e.g. dripping or This apparatus must be protected by a 3A fuse (BS1362) in a 13A plug splashing) or to temperatures exceeding 70 degrees centigrade. It is (BS1363). If another type of plug is used a 5A fuse should be fitted in recommended that the FM band be used wherever possible as better the plug, adaptor or distribution board. results in terms of quality and freedom from interference will usually be obtained than on the MW band.
