Resumen del contenido incluido en la página 1
OM-188 304AF 2007 −10
Processes Processes
MIG (GMAW) Welding
Pulsed MIG (GMAW-P)
Stick (SMAW) Welding
Description
Arc Welding Power Source With Built-In
Synergic Control
Invision 354MP
(230/460 And 460/575 Volt Models)
File: MIG (GMAW)
Visit our website at
www.MillerWelds.com
Resumen del contenido incluido en la página 2
From Miller to You Thank you and congratulations on choosing Miller. Now you can get the job done and get it done right. We know you don’t have time to do it any other way. That’s why when Niels Miller first started building arc welders in 1929, he made sure his products offered long-lasting value and superior quality. Like you, his customers couldn’t afford anything less. Miller products had to be more than the best they could be. They had to be the best you could buy. Today, the people that bu
Resumen del contenido incluido en la página 3
TABLE OF CONTENTS SECTION 1 − SAFETY PRECAUTIONS - READ BEFORE USING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1-1. Symbol Usage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1-2. Arc Welding Hazards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1-3. Additional Symbols For Insta
Resumen del contenido incluido en la página 4
Resumen del contenido incluido en la página 5
SECTION 1 − SAFETY PRECAUTIONS - READ BEFORE USING som _2007 −04 7 Protect yourself and others from injury — read and follow these precautions. 1-1. Symbol Usage DANGER! − Indicates a hazardous situation which, if Indicates special instructions. not avoided, will result in death or serious injury. The possible hazards are shown in the adjoining symbols or explained in the text. Indicates a hazardous situation which, if not avoided, could result in death or serious injury. The possible This gro
Resumen del contenido incluido en la página 6
Do not use welder to thaw frozen pipes. FUMES AND GASES can be hazardous. Remove stick electrode from holder or cut off welding wire at contact tip when not in use. Welding produces fumes and gases. Breathing Wear oil-free protective garments such as leather gloves, heavy these fumes and gases can be hazardous to your shirt, cuffless trousers, high shoes, and a cap. health. Remove any combustibles, such as a butane lighter or matches, Keep your head out of the fumes. Do not breathe the
Resumen del contenido incluido en la página 7
1-3. Additional Symbols For Installation, Operation, And Maintenance FIRE OR EXPLOSION hazard. MOVING PARTS can cause injury. Do not install or place unit on, over, or near Keep away from moving parts such as fans. combustible surfaces. Keep all doors, panels, covers, and guards Do not install unit near flammables. closed and securely in place. Do not overload building wiring − be sure power supply system is Have only qualified persons remove doors, panels, covers, or properly sized,
Resumen del contenido incluido en la página 8
1-4. California Proposition 65 Warnings For Gasoline Engines: Welding or cutting equipment produces fumes or gases which contain chemicals known to the State of California to Engine exhaust contains chemicals known to the State of cause birth defects and, in some cases, cancer. (California California to cause cancer, birth defects, or other reproduc- Health & Safety Code Section 25249.5 et seq.) tive harm. For Diesel Engines: Battery posts, terminals and related accessories contain lead and lead
Resumen del contenido incluido en la página 9
SECTION 2 − CONSIGNES DE SÉCURITÉ − LIRE AVANT UTILISATION fre_som_2007 −04 7 Se protéger et protéger les autres contre le risque de blessure — lire et respecter ces consignes. 2-1. Symboles utilisés DANGER! − Indique une situation dangereuse qui si on Indique des instructions spécifiques. l’évite pas peut donner la mort ou des blessures graves. Les dangers possibles sont montrés par les symboles joints ou sont expliqués dans le texte. Indique une situation dangereuse qui si on l’évite pas peu
Resumen del contenido incluido en la página 10
Il reste une TENSION DC NON NÉGLIGEABLE dans LE SOUDAGE peut provoquer un in les sources de soudage onduleur quand on a cendie ou une explosion. coupé l’alimentation. Le soudage effectué sur des conteneurs fermés tel Arrêter les convertisseurs, débrancher le courant électrique et que des réservoirs, tambours ou des conduites peu décharger les condensateurs d’alimentation selon les instructions provoquer leur éclatement. Des étincelles peuven indiquées dans la partie Entretien avant de toucher
Resumen del contenido incluido en la página 11
Protéger les bouteilles de gaz comprimé d’une chaleur excessive, LES ACCUMULATIONS DE GAZ des chocs mécaniques, des dommages physiques, du laitier, des risquent de provoquer des blessures flammes ouvertes, des étincelles et des arcs. ou même la mort. Placer les bouteilles debout en les fixant dans un support station- Fermer l’alimentation du gaz protecteur en cas naire ou dans un porte-bouteilles pour les empêcher de tomber ou de non-utilisation. de se renverser. Veiller toujours à bien
Resumen del contenido incluido en la página 12
LES FILS DE SOUDAGE peuvent LE RAYONNEMENT HAUTE FRÉ- provoquer des blessures. QUENCE (H.F.) risque de provoquer des interférences. Ne pas appuyer sur la gâchette avant d’en avoir reçu l’instruction. Le rayonnement haute fréquence (H.F.) peut Ne pas diriger le pistolet vers soi, d’autres per- provoquer des interférences avec les équipe- sonnes ou toute pièce mécanique en enga- ments de radio −navigation et de communica- geant le fil de soudage. tion, les services de sécurité et les ordinat
Resumen del contenido incluido en la página 13
2-5. Principales normes de sécurité Safety in Welding, Cutting, and Allied Processes, ANSI Standard Z49.1, L4W 5NS (téléphone : 800-463-6727 ou à Toronto 416-747-4044, site de Global Engineering Documents (téléphone : 1-877-413-5184, site Internet : www.csa-international.org). Internet : www.global.ihs.com). Safe Practice For Occupational And Educational Eye And Face Protec- tion, ANSI Standard Z87.1, de American National Standards Institute, Recommended Safe Practices for the Preparation for We
Resumen del contenido incluido en la página 14
OM-188 304 Page 10
Resumen del contenido incluido en la página 15
SECTION 3 − INTRODUCTION 3-1. Specifications RMS Amps Input at Rated Load Output, 60 Hz 3-Phase at NEMA Load Voltages and Voltage Amperage Max. Open- Class I Rating Rated Output at Rated Output at Range in Range in Range in Range in Circuit Circuit 60% Duty Cycle CV Mode CC Mode Voltage 230 V 460 V KVA** KW** 300 A at 32 VDC, 3-Phase 10 −35 V 5 −400 A 90 VDC 30.5 18.9 12.2 11.6 (0.21*) (0.10*) (0.09*) (0.04*) 225 A at 29 VDC, 1-Phase 47.4 24.5 11.3 7.6 (0.34*) (0.14*) (0.09*) (0.04*) *While idli
Resumen del contenido incluido en la página 16
3-3. Volt-Ampere Curves Volt-ampere curves show minimum and maximum voltage and amper- age output capabilities of unit. Curves of other settings fall be- tween curves shown. CC Mode CV Mode va_curve1 4/95 − SA-188 537 / SA-178 653 OM-188 304 Page 12
Resumen del contenido incluido en la página 17
SECTION 4 − INSTALLATION 4-1. Selecting A Location 24 in (610 mm) Dimensions And Weight 76 lb (34.6 kg) 17 in (432 mm) 12-1/2 in (318 mm) 1 Lifting Handles Movement Use handles to lift unit. 2 Hand Cart 1 ! Do not move or operate unit Use cart or similar device to move where it could tip. unit. 3 Rating Label Use rating label to determine input 1 power needs. 2 4 Line Disconnect Device Locate unit near correct input power supply. ! Special installation may be required where gasoline or volatile
Resumen del contenido incluido en la página 18
4-2. Weld Output Receptacles And Selecting Cable Sizes ! ARC WELDING can cause Electromagnetic Interference. To reduce possible interference, keep weld cables as short as possible, close together, and down low, such as on the floor. Locate welding operation 100 meters from any sensitive electronic equipment. Be sure this welding machine is installed and grounded according to this manual. If interference still occurs, the user must take extra measures such as moving the welding machine, using shi
Resumen del contenido incluido en la página 19
4-3. Remote 14 Receptacle Information Socket* Socket Information A 24 volts ac. Protected by circuit breaker CB2. 24 VOL 24 VOLTS TS AC AC AJ AJ K B Contact closure to A completes 24 volts ac I B contactor control circuit. L L NH NH C C I 115 volts ac. Protected by circuit breaker CB1. M D G 1 115 VOL 15 VOLTS TS AC AC F F E J Contact closure to I completes 115 volts ac contactor control circuit. C Output to remote control; +10 volts dc. REMOTE D Remote control circuit common. OUTPUT OUTPUT CONT
Resumen del contenido incluido en la página 20
4-5. Electrical Service Guide NOTICE − INCORRECT INPUT POWER can damage this welding power source. This welding power source requires a CONTINUOUS supply of input power at rated frequency10%) and voltage 10%). Phase to ground voltage shall not exceed +10% of rated input voltage. Do not use a genera- tor with automatic idle device (that idles engine when no load is sensed) to supply input power to this welding power source. NOTICE − Actual input voltage should not be 10% less than minimum and
