Resumen del contenido incluido en la página 1
MMG-CR3810.OM.QXD 7/15/02 7:09 AM Page 21
UNDERCABINET CD CLOCK RADIO
MODEL: MMG-CR3810
BEFORE OPERATING THIS PRODUCT,
PLEASE READ THESE INSTRUCTIONS COMPLETELY.
OPERATING INSTRUCTIONS
Resumen del contenido incluido en la página 2
MMG-CR3810.OM.QXD 7/15/02 7:09 AM Page 1 SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated ‘dangerous voltage’ within the product’s enclosure that may be of sufficient magnitude to constitut
Resumen del contenido incluido en la página 3
MMG-CR3810.OM.QXD 7/15/02 7:09 AM Page 2 INFORMATION: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installa- tion. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with instructions, may cause harmful interfer- ence to radio communicat
Resumen del contenido incluido en la página 4
MMG-CR3810.OM.QXD 7/15/02 7:09 AM Page 3 IMPORTANT SAFETY INSTRUCTIONS (CONTINUED) 10. POWER SOURCES 18. REPLACEMENT PARTS This product should be operated only from the When replacement parts are required, be sure type of power source indicated on the marking the service technician uses replacement parts label. If you are not sure of the type of power specified by the manufacturer or those that have supply to your home, consult your appliance the same characteristics as the original part. dea
Resumen del contenido incluido en la página 5
MMG-CR3810.OM.QXD 7/15/02 7:09 AM Page 4 Dear Customer: Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your musical enjoyment. Now it’s time to consider how you can maximize the fun and excitement your equipment offers. This manufacturer and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoyi
Resumen del contenido incluido en la página 6
MMG-CR3810.OM.QXD 7/15/02 7:09 AM Page 5 POWER SOURCE Unravel the AC cord and connect it to a conveniently located AC outlet having 120V and AC Outlet 60Hz only. The Clock Display will blink. NOTE: The AC plug supplied with the unit is polarized to help minimize the possibility of AC Plug electric shock. If the AC plug does not fit into a nonpolarized AC outlet, do not file or cut the wide blade. It is the user’s responsibility to have an electrician replace the obsolete outlet. LOCATION OF CON
Resumen del contenido incluido en la página 7
MMG-CR3810.OM.QXD 7/15/02 7:09 AM Page 6 LOCATION OF CONTROLS (CONTINUED) 1. OPEN/CLOSE Button 2. Number Buttons 3. OVER Button 1 12 4. STOP ( ) Button 5. PLAY/PAUSE ( ) Button 2 6.SKIP/TUNING Button 7.SKIP/TUNING Button 13 3 8. MEM DOWN/ RANDOM Button 9. MEM UP/REPEAT Button 4 5 10. TUNER/BAND Button 14 6 11. CD Button 7 8 15 12. POWER Button 9 13. MUTE Button 16 10 11 14. VOLUME +/– Buttons 17 18 15. MEM/CLOCK SET Button 16. TIMER Button 17. DISPLAY Button 18. Battery Compartment (Rear) B
Resumen del contenido incluido en la página 8
MMG-CR3810.OM.QXD 7/15/02 7:09 AM Page 7 MOUNTING This under the cabinet CD clock radio has been designed to be installed underneath a wooden cabinet by using the Mounting Template, four (4) Screws, four (4) Washers and four (4) Spacers (see Figure 1). Mounting Template Screws (4 of each size) 2-3/4" and 1-5/8" Spacers (4 of each size) 4 Washers 1" 1/2" 1/4" Figure 1 MOUNTING THE UNIT Locate a desired space for the CD clock radio (it is recommended to mount the unit at the front edge of the c
Resumen del contenido incluido en la página 9
MMG-CR3810.OM.QXD 7/15/02 7:09 AM Page 8 MOUNTING (CONTINUED) 3b. IF YOUR CABINET HAS AN OVERHANG: Measure the thickness of the overhang (see Figure 3). Fold the front of the template down along the printed guideline that is closest to the thickness of your cabinet. Tape the Measure Thickness folded portion to the of Cabinet Overhang backside of the overhang, Figure 3 then tape the template underneath the cabinet (see Figure 4). NOTE: If the cabinet has glue blocks or other obstructions, cut
Resumen del contenido incluido en la página 10
MMG-CR3810.OM.QXD 7/15/02 7:09 AM Page 9 MOUNTING (CONTINUED) 7. Insert screws from the INSIDE of the cabinet. The washers must be used on metal cabinets and wood cabinets if the drilled holes were not countersunk. Position the washers, flat- side down, and insert the screws into the holes. 8. If your cabinet does not SELECT SCREWS WHICH MEET MINIMUM, BUT DO NOT have an overhang, skip EXCEED MAXIMUM LENGTH this step. Figure 5 If your cabinet has an overhang, hold the Mounting Screws screwhead
Resumen del contenido incluido en la página 11
1 2 2 MMG-CR3810.OM.QXD 7/15/02 7:09 AM Page 10 OPERATION TO SET OR RESET THE ACTUAL TIME 1 2 1 2 When the unit is off, press the Press the SKIP/TUNING / MEMORY/CLOCK SET button. buttons ❶ to set the hour, then press the MEMORY/CLOCK SET button ❷. Press the SKIP/TUNING / buttons ❶ to set the minutes, then press the MEMORY/CLOCK SET button ❷ again. TO SET THE COUNTDOWN TIMER 1 2 2 2 1 1 Press and hold the TIMER button ❶; Press the TIMER button ❶ again and the display will show “00:00” and the
Resumen del contenido incluido en la página 12
MMG-CR3810.OM.QXD 7/15/02 7:09 AM Page 11 OPERATION (CONTINUED) TO START THE COUNTDOWN TIMER 1 2 Once the countdown time has been When the countdown timer reaches entered (see previous page), press “00:00:oo”, the unit will beep. Press the TIMER button and the display will the TIMER button again to turn off the start counting down the preset beeps. countdown time. NOTES: During the countdown, if you press the TIMER button again, the countdown timer will revert back to the original timer.
Resumen del contenido incluido en la página 13
1 MMG-CR3810.OM.QXD 7/15/02 7:09 AM Page 12 OPERATION (CONTINUED) TO LISTEN TO THE RADIO 1 2 2 1 2 2 Press the POWER button ❶ to turn Tune a station by pressing the the unit on. Press the RADIO/BANDSKIP/TUNING or button ❶. button once ❷ to select radio. To scan for strong station(s), press Repeatedly press to select the desired and hold the the SKIP/TUNING or band (AM, FM). button ❶; the unit will then scan and stop on the next strong station. Adjust the volume using the VOLUME +/– buttons ❷
Resumen del contenido incluido en la página 14
MMG-CR3810.OM.QXD 7/15/02 7:09 AM Page 13 OPERATION (CONTINUED) TO RECALL MEMORY PRESETS MUTE 1 3 1 4 1 2 2 2 1 To recall the Memory Presets, simply To temporarily mute the sound, press press the MEMORY UP/REPEAT the MUTE button ❶ on the remote, the button ❶ or MEMORY DOWN/ sound will be muted. Press the MUTE RANDOM button ❷, or directly select button ❶ again or one of the VOLUME them using the Number buttons ❸. For +/– buttons ❷ to restore the sound. Memory Presets over 9, press the OVER bu
Resumen del contenido incluido en la página 15
MMG-CR3810.OM.QXD 7/15/02 7:09 AM Page 14 OPERATION (CONTINUED) TO PLAY A CD 1 2 2 1 Press the PLAY/PAUSE ) button ( Insert a CD as described on the to start playback; the Play indicator previous page. Press the POWER will appear. TO PAUSE PLAYBACK, button ❶ to turn the unit on and press press the PLAY/PAUSE ) button ( the CD button ❷. The total playing again; the display will blink and the time and number of tracks will appear Pause indicator will appear. Press in the display. again to resu
Resumen del contenido incluido en la página 16
2 MMG-CR3810.OM.QXD 7/15/02 7:09 AM Page 15 OPERATION (CONTINUED) DIRECT TRACK ACCESS When a CD is playing, simply press 1 the Number buttons ❶ to directly 1 select a track. For tracks over 9, press 2 the OVER button ❷, followed by the Number buttons ❶ (i.e. to select track 12, press the OVER button, followed by “1” then “2”. TO REPEATEDLY PLAY BACK ONE TRACK 1 2 2 1 1 1 3 Press the POWER button ❶ to turn Press the SKIP/TUNING or the unit on and press the CD button ❷. button ❶ to select a t
Resumen del contenido incluido en la página 17
1 MMG-CR3810.OM.QXD 7/15/02 7:09 AM Page 16 OPERATION (CONTINUED) TO RANDOMLY PLAY BACK TRACKS ON A CD 1 2 2 1 3 2 2 Press the POWER button ❶ to turn Press the PLAY/PAUSE ) button ( the unit on and press the CD button ❷. ❶ to begin playback. The unit will play Press the MEMORY DOWN/RANDOM all the tracks in random order. Adjust button ❸; “RANDOM” will appear in the the volume using the VOLUME +/– buttons ❷ as desired. When all the display. tracks have been played, the unit will stop. TO PROGR
Resumen del contenido incluido en la página 18
MMG-CR3810.OM.QXD 7/15/02 7:09 AM Page 17 OPERATION (CONTINUED) 3 4 2 1 1 Press the PLAY/PAUSE ) button Adjust the volume using the VOLUME ( to begin playback. The unit will play all +/– buttons ❶ as desired. When the the tracks in the order you disc is through playing, it will stop. programmed them. Press the STOP () button ❷ to stop the disc before it is finished. 5 NOTES: Press the STOP ( ) button to stop the disc before it is finished. Programming is the ability to preselect the orde
Resumen del contenido incluido en la página 19
C B L E E N A MMG-CR3810.OM.QXD 7/15/02 7:09 AM Page 18 CARE AND MAINTENANCE Caring for Compact Discs Treat the disc carefully. Handle the compact disc only by its edges. Never allow your fingers to come in contact with the shiny, unprinted side of the disc. Do not attach adhesive tape, stickers, etc. to the compact disc label. Clean the compact disc periodically with a soft, lint-free, dry cloth. Never use detergents or abrasive cleaners to clean the disc. If necessary, use a CD cleanin
Resumen del contenido incluido en la página 20
MMG-CR3810.OM.QXD 7/15/02 7:09 AM Page 19 TROUBLESHOOTING GUIDE If you experience a problem with this unit, check the chart below before calling for service. SYMPTOM CAUSE SOLUTION Unit will not AC cord not Check AC cord turn on. connected. connection. Disc will not play. CD compartment Close CD compartment not closed. door. Disc inserted Reinsert disc correctly. incorrectly. Dirty or defective disc. Try another disc. Moisture Wipe disc with soft cloth. condensation on disc. No sound. Volume
