Manual de instrucciones de Lenoxx Electronics CR-501

Resumen del contenido incluido en la página 1

®
AM / FM CLOCK RADIO
MODEL CR-501
OPERATING INSTRUCTIONS
EASY TO SET CLOCK CONTROLS
•
RECEIVES AM/FM BROADCASTS
•
ELECTRONIC DIGITAL CLOCK
•
PM & AUTO INDICATORS
•
WAKE-UP TO RADIO OR BUZZER ALARM
•
SNOOZE FUNCTION (FOR EXTRA 9 MINUTES SLEEP)
•
SLEEP TO RADIO (WITH AUTOMATIC SHUT OFF)
•
PLEASE READ CAREFULLY BEFORE USE
IB-CR501-DG-E-052405
IB-CR501-DG-E-052405.pmd 1 5/24/2005, 4:34 PM

Resumen del contenido incluido en la página 2

WARNING TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THE PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. TO PREVENT ELECTRICAL SHOCK, MATCH WIDE BLADE PLUG TO WIDE SLOT, FULLY INSERT. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with WARNING: TO REDUCE The exclamation point arrowhead symbol, THE RISK OF ELECTRIC within an e

Resumen del contenido incluido en la página 3

ADDITIONAL SAFETY INSTRUCTIONS 1. Power Sources - The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance. 2. Wall or Ceiling Mounting - The appliance should not be mounted to a wall or ceiling. 3. Object and Liquid Entry - Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings. 4. Servicing - The user should not attempt to service the appliance bey

Resumen del contenido incluido en la página 4

OPERATING INSTRUCTIONS Powering Up Plug the AC power cord into a 120V, 60Hz electrical outlet. The clock display will light up and flash indicating the power is on. NOTE: This cord is polarized. This means the cord will only fit one way into the socket or wall outlet. If it does not fit, do not force it, just reverse it and try again. Setting the Clock 1. Press the TIME set button together with the HOUR set button until the display shows the desired hour. 2. Press the TIME set button together wi

Resumen del contenido incluido en la página 5

OPERATING INSTRUCTIONS Waking up to Radio (Alarm) 1. Set the alarm time as previously instructed. 2. Select your desired AM or FM broadcast by following the procedure of Playing the Radio. 3. Make sure the VOLUME control is set loud enough to wake you up. 4. Slide the FUNCTION switch to AUTO position and the AUTO lamp will light up. NOTE: Your set is now ready to turn on automatically at your selected alarm time. 5. When alarm sounds, to get 9 minutes of extra sleep, press the SNOOZE button. 6.

Resumen del contenido incluido en la página 6

TROUBLE SHOOTING (Helpful Hints) SHOULD YOUR SET EXHIBIT A PROBLEM, CHECK THE FOLLOWING BEFORE SEEKING SERVICE. SYMPTOM CAUSE SOLUTION AM or PM not set Advance the clock 12 correctly. Is alarm hours. time set in AM range Alarm does not (PM Lamp off)? come on in the morning. FUNCTION switch Set the FUNCTION is in OFF position. Is switch to AUTO or the AUTO Lamp off? ALARM position. FM antenna wire is Extend FM antenna not extended. wire. FM is distorted Station not tuned in Tune to desired stati

Resumen del contenido incluido en la página 7

SPECIFICATIONS Power source: AC 120V, 60Hz Dimensions: 5 1/2" (Length) 2 5/8" (Height) 5" (Depth) Frequency range: FM 88 - 108MHz AM 530 - 1700kHz LIMITED WARRANTY We warrant this product to be free from defects in material and workmanship under normal use for a period of 90 days after purchase and we will repair it free of charge or replace it at no charge, should it become defective under this warranty, providing you submit proof of purchase (sales slip) with the set. During the init