Manual de instrucciones de Life Fitness 914101

Resumen del contenido incluido en la página 1

l
~Serious Steel
9114101 ST PLATE RACK
I
I
ASSEMBLY INSTRUCTIONS
Revis’ion: 05/05/97
1
Part # 6691401

Resumen del contenido incluido en la página 2

]IMPORTANT NOTES I There is a risk assumed by individuals who use this type of equipment. To minimize risk, please follow these rules: 1. Consult your physician before beginning any exercise program. Inspect equipment daily. Tighten all loose connections and replace worn parts ~mmediately. 2. Failure to do so :may result in serious injury. 3. Do not allow minors or children to play on or around this equipment. Exercise with care to avoid injury. 4. 5. If unsure of proper use of equipment, call y

Resumen del contenido incluido en la página 3

PARTS LIST [ QT~ PART # DESCRIPTION KEY 1 6690101 FRAME WELDMENT 1 4 6690401 1-1/2" DIA X 19" TUBE 2 4 3102502 3/8" LOCKWASHER 3 4 3102910 1/2 X 3" BOLT 4 4 3102801 1/2" LOCKNUT 5 8 RUBBER BUMPER 6 3102502 4 7 3102502 1/2" FLAT WASHER 4 3202401 3/8 X 1" BUTTON HEAD CAP SCREW 8 2 6615503 3 X 2 X 18" TUBE 9 1/2 X 3" FIGURE 1 STEP 1: SECURELY assemble two 3 X 2 X 18" TUBES (9) to the FRAME WELDMrI ’ (1) using four 1/2 X BOLTS (4) four 1/2" FLAT WASHERS (7) and four 1/2" LOCKNUTS (5) ~s shown in FI

Resumen del contenido incluido en la página 4

FIGURE 2 STEP 2: Insert the four 1.-1/2 DIA X 19" TUBES (2) through the side of FRAME WELDM[ENT (1) so the threaded hole in the 19" :IqJ-BES (2) lines up with the holes in the FRAME WELDMENT (1) as shown in FIGURE 2. STEP 3: SECURELY assemble the four 1-1/2" DIA X 19" TUBES (2) to the FRAME WF, LDMENT (1) using four 3/8-16 X 1" BUTI’ON ~ CAP SCREWS (8) and four 3/8" LO KWAS]EIERS (3) as shown FIGURE 2. FIGURE 4 STEP 4: Slide eight RUBBER BUMSPERS (6) over the ends of the 1-1/2" DIA X 19" TUBES