Resumen del contenido incluido en la página 1
Model No. IMBE53900
Serial No.
USERÕS MANUAL
Write the serial number in the
space above for reference.
Serial Number Decal (under seat)
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete
customer satisfaction. If you
have questions, or if there are
missing parts, we will guarantee
you complete satisfaction
through direct assistance from
our factory.
TO AVOID UNNECESSARY
DELAYS, PLEASE CALL DIRECT
TO OUR TOLL-FREE CUSTOMER
HOT LINE. The trained techni-
cians on our customer
Resumen del contenido incluido en la página 2
Table of Contents Important Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Part Identification Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Assem
Resumen del contenido incluido en la página 3
Important Precautions WARNING: To reduce the risk of serious injury, read the following important precau- tions before using the weight bench. 1. Read all instructions in this manual before 11. The weight bench is designed to support a using the weight bench. Use the weight maximum of 560 pounds, including the user, bench only as described in this manual. a barbell, and weights. Do not place more than 310 pounds, including the barbell, on 2. It is the responsibility of the owner to ensure the we
Resumen del contenido incluido en la página 4
Before You Begin ¨ Thank you for selecting the versatile IMAGE 4.5 toll-free at 1-800-999-3756, Monday through Friday, 6 ¨ weight bench. The IMAGE 4.5 is designed to help you a.m. until 6 p.m. Mountain Time (excluding holidays). develop every major muscle group of the body. To help us assist you, please note the product model Whether your goal is a shapely figure, dramatic mus- number and serial number before calling. The model cle size and strength, or a healthier cardiovascular number is IMBE5
Resumen del contenido incluido en la página 5
R1100A Part Identification ChartÑModel No. IMBE53900 M6 x 16mm Screw (3) M8 x 16mm Bolt (75) M10 Washer (6) Large Washer (70) M8 x 25mm Bolt (76) M6 Washer (30) M8 Washer (77) M10 x 25mm Bolt (69) M8 x 30mm Bolt (64) M10 Nylon Locknut (11) M8 Nylon Locknut (42) M6 x 35mm Bolt (34) M6 x 55mm Screw (4) M8 x 60mm Bolt (65) M10 x 60mm Button Head Bolt (12) M8 x 65mm Carriage Bolt (71) M10 x 65mm Bolt (68) M10 x 65mm Carriage Bolt (66) M10 x 70mm Bolt (21) M8 x 70mm Bolt (41) M10 x 80mm Bolt (31
Resumen del contenido incluido en la página 6
Assembly Before beginning assembly, carefully read the ¥ As you assemble the weight bench, make sure all following information and instructions: parts are oriented as shown in the drawings. In addition to the included allen wrench , Make Things Easier for Yourself! assembly requires the following tools (not This manual is designed to ensure that the included): weight bench can be assembled successfully by anyone. By setting aside plenty of time, and ¥ Two (2) adjustable wrenches by decidin
Resumen del contenido incluido en la página 7
3. Slide a Brace (44) onto the bracket on one of the 3 Uprights (43). Attach the Brace to the Upright with two M10 x 65mm Bolts (68), four M10 Washers (6), and two M10 Nylon Locknuts (11). Do not tighten the Nylon Locknuts yet. 43 Slide the Upright (43) and the Brace (44) onto the M10 x 65mm Carriage Bolts (66) and the M8 x 65mm Carriage Bolts (71) in the left Base (46). Attach the 11 Upright with two M10 Nylon Locknuts (11). Attach the 6 Brace with two M8 Washers (77) and two M8 Nylon Locknuts
Resumen del contenido incluido en la página 8
6. Have a second person hold the Top Crossbar (48) so 6 that the pull-up bar faces away from the rack, as shown. 11 21 Attach the Top Crossbar (48) to the left Upright (43) 51 with two M10 x 70mm Bolts (21), a Small Support 48 Plate (51), and two M10 Nylon Locknuts (11). Do not 11 11 tighten the Nylon Locknuts yet. 21 Attach the Top Crossbar (48) to the right Upright (43) Pull-up with two M10 x 70mm Bolts (21), a Small Support Bar 11 Plate (51), and two M10 Nylon Locknuts (11). Do not tighten
Resumen del contenido incluido en la página 9
9. Identify the Left Safety Spotter (57) by the position of 9 the handle and the Left Spotter Hook (45). Place the Left Safety Spotter on the left Base (46) so it is cen- tered over the indicated hole. 53 Have a second person hold the Locking Bar (62) so 43 that the Left Weight Glider (60) rests on top of the Left Safety Spotter (57). Insert a Weight Guide (53) 62 into the Left Weight Glider, the Left Safety Spotter, and the hole in the Base (46). Note: Tilt the Weight Guide away from the Uprigh
Resumen del contenido incluido en la página 10
12. Attach the upper end of one of the Weight Guides 12 (53) to the bracket on the Upright (43) with an M8 x 64 30mm Bolt (64) and an M8 Washer (77). Attach the other Weight Guide (53) to the other 77 Upright (43) in the same manner. Tighten all of the Locknuts used in steps 1 to 12. 53 43 13. Press a 50mm x 70mm Outer Cap (10) onto each 13 11 end of the Stabilizer (13). Attach the Stabilizer (13) to the Bench Frame (5) with two M10 x 60mm Button Head Bolts (12) and two M10 Nylon Locknuts (11).
Resumen del contenido incluido en la página 11
16. Press two 25mm x 40mm Inner Caps (28) into each 16 Lubricate 28 27 Backrest Tube (27). Press two 25mm x 40mm Inner Caps into the Backrest Adjustment Bracket (35). 6 22 Lubricate an M10 x 190mm Bolt (22). Attach the Holes Backrest Tubes (27) to the welded tube on the 11 Backrest Adjustment Bracket (35) with the Bolt, two 6 M10 Washers (6), and an M10 Nylon Locknut (11). Make sure that the Backrest Tubes are turned as 28 35 shown. The indicated holes are not centered in the Backrest Tubes but
Resumen del contenido incluido en la página 12
20. Turn the Seat (14) as shown. Attach the wide end 20 of the Seat to the bracket on the Seat Mounting 14 Bracket (23) with two M6 x 16mm Screws (3). Tilt the Seat Mounting Bracket (23) upwards and attach the narrow end of the Seat (14) to the Seat Bracket Mounting Bracket with an M6 x 35mm Bolt (34) and an M6 Washer (30). 23 30 3 34 21. Attach the Adjustable Bench Leg (2) to the Bench 21 40 Leg (1) with the Adjustment Knob (37). 2 Insert a 45mm Square Inner Cap (40) into the top of the Adjus
Resumen del contenido incluido en la página 13
24. Attach the Curl Pad (8) to the Curl Upright (9) with 24 two M6 x 16mm Screws (3). 8 3 25. Make sure all parts are properly tightened before you use the weight bench. The use of all remaining 9 parts will be explained in ADJUSTING THE WEIGHT BENCH starting on the following page. Adjusting the Weight Bench This section explains how the weight bench can be adjusted. See the included exercise guide for important information about how to perform a variety of exercises and how to get the greatest
Resumen del contenido incluido en la página 14
ATTACHING WEIGHTS TO THE BARBELL To use the Barbell (63), slide the desired amount of weight (not included) onto each end of the Barbell. 61 Secure the weights with the Large Weight Clips (67). Note: To use standard weights, the Weight Adapters (61) 63 should be removed from the Barbell. Attach weights to the Barbell with the Small Weight Clips (not shown). 67 WARNING: Do not place more than 260 pounds on the Barbell (63). Always secure the weights with Weight Clips (67) when they are on the Ba
Resumen del contenido incluido en la página 15
ADJUSTING THE SEAT To raise the Seat (14), lift the narrow end of the Seat until the appropriate tab on the Seat Adjustment Bracket (36) engages the welded pin (not shown) on the right side of the Bench Frame (5). To lower the Seat (14), use the handle on the Seat 36 Handle Adjustment Bracket (36) to disengage the Seat 14 Adjustment Bracket from the pin on the right side of the Bench Frame (5). Lower the Seat to the desired posi- Pin tion and engage the appropriate tab on the Seat Adjustment Bra
Resumen del contenido incluido en la página 16
Ordering Replacement Parts To order replacement parts, simply call our Customer Service Department toll-free at 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). To help us assist you, please be pre- pared to give the following information when calling: ¥ The MODEL NUMBER of the product (IMBE53900) ¨ ¥ The NAME of the product (IMAGE 4.5 weight bench) ¥ The SERIAL NUMBER of the product (see the front cover of this manual) ¥ The KEY NUMBER and DESCR
Resumen del contenido incluido en la página 17
REMOVE THIS PART LIST/EXPLODED DRAWING FROM THE MANUAL SAVE THIS PART LIST/EXPLODED DRAWING AND THE USERÕS MANUAL FOR FUTURE REFERENCE 81
Resumen del contenido incluido en la página 18
R1100A Part ListÑModel No. IMBE53900 Key No. Qty. Description Key No. Qty. Description 1 1 Bench Leg 41 5 M8 x 70mm Bolt 2 1 Adjustable Bench Leg 42 13 M8 Nylon Locknut 3 4 M6 x 16mm Screw 43 2 Upright 4 4 M6 x 55mm Screw 44 2 Brace 5 1 Bench Frame 45 1 Left Spotter Hook 6 16 M10 Washer 46 2 Base 7 1 Bench Base 47 1 Middle Crossbar 8 1 Curl Pad 48 1 Top Crossbar 9 1 Curl Upright 49 1 Right Spotter Hook 10 2 50mm x 70mm Outer Cap 50 2 Large Support Plat
Resumen del contenido incluido en la página 19
R1100A Exploded DrawingÑModel No. IMBE53900 77 64 64 21 14 51 77 51 67 15 11 28 43 53 48 21 27 39 31 22 52 21 11 23 43 11 41 26 30 55 21 11 36 6 4 6 68 44 11 42 33 6 25 30 6 28 11 35 47 34 3 30 16 40 4 55 6 28 21 11 68 21 6 11 11 8 25 37 44 26 3 2 42 42 11 11 42 50 21 18 77 77 39 5 10 9 41 42 18 13 54 11 1 20 53 72 6 69 11 11 12 74 70 74 21 10 65 46 75 6 60 19 11 75 71 77 77 61 26 25 58 6 20 40 20 59 42 66 20 73 58 6 74 21 7 74 40 49 17 42 42 26 62 58 45 50 74 46 20 74 25 63 5
