Resumen del contenido incluido en la página 1
2
Table of Contents
Introduction
Specifications 4
Major Components 5
Safe Riding Recommendations
Safety Recommendations 9
Cargo Carrying Recommendations 11
ASSEMBLY
Caution about Assembly 12
Major Components 12
Basic Maintenance
Cleaning and Lubrication 17
Scheduled Maintenance 17
Fixing a Flat Tire 18
Replacing Brake S
Resumen del contenido incluido en la página 2
3 4 Introduction SPECIFICATIONS Congratulations on you purchase of your new Husky industrial bicycle. You have purchased a bicycle that has many features and qualities. Model HD-105, HD-105L, HD-120 Please take a few minutes and read through this manual before you ride Frame Size HD-105L (16”), HD-105/120 (19”) your bicycle for the first time. Learning about this product and safe riding Wheel Size 26 x 2.125” and maintenance will return many years of enjoyment a
Resumen del contenido incluido en la página 3
MODEL HD-105/120 COMPONENTS GRIP HANDLEBAR FRONT BASKET SADDLE STEM SEAT POST FENDER FRAME HEAD TUBE FRAME REAR WHEEL FRONT WHEEL TIRE PEDAL CRANK CHAIN GUARD FORK CHAIN
Resumen del contenido incluido en la página 4
9 10 SAFE RIDING AT NIGHT SAFE RIDING RECOMMENDATIONS We do not recommend riding your bicycle at night. If you have to ride at night, please follow these rules: Good Sense Safety Tips Whether you use your bicycle for business or pleasure riding, your safety LIGHTS - You should equip your bicycle with a high quality bicycle head should always be your #1 concern. Here are some of the general light for the front, usually mounted on the handle bar, and a blinking red common sens
Resumen del contenido incluido en la página 5
11 12 grip of the handlebar in all conditions. Using gloves when riding your bike Cargo Carrying Recommendations helps minimize loss of grip in wet conditions. CARRYING CARGO - Your Husky bicycle is designed to carry light FENDERS - HUSKY offers fenders as standard equipment for most of its cargo. Weight distribution of cargo is very important. Do not stack products. Fenders protect the rider from water and mud splashes. cargo too high. Whether you use a basket, or carr
Resumen del contenido incluido en la página 6
13 14 a rubber mallet, tap the loosened bolt down to release the wedge from the CAUTION ABOUT BICYCLE ASSEMBLY steer tube. You can now raise or lower the stem to the desired height. Your bicycle is shipped from factory 60% assembled. For your safety, we recommend that you purchase this product fully assembled. The price CAUSION: Never raise the stem beyond the maximum level you pay for this bicycle may include assembly. Most authorized Husky (insertion mark) stamped on the stem
Resumen del contenido incluido en la página 7
15 16 The saddle’s height can be adjusted by loosening the seat post binder normally found at auto service stations as the high pressure may bolt located on the frame’s seat tube. To adjust the saddle height, twist cause a blow out. and pull the seat post up to the desired point and tighten the binder bolt, making sure that the saddle’s nose is straight. Check the tire pressure using a pressure gauge specifically made for bicycles. Automotive pressure gauges may not be suitable for b
Resumen del contenido incluido en la página 8
17 18 brakes are maintenance free and need no adjustment. If you have adjustments, wheel alignment and truing, component replacement, tire difficulty braking or using your coaster brake, take your bike to a bike repair or replacement. dealer for inspection. The coaster brake arm is attached to the frame with a bolt and nut. For the coaster brake to perform, the arm must be If you ride your bicycle for more than 20 hours a month, we recommend secured tightly at all times. INSPECT T
Resumen del contenido incluido en la página 9
19 20 9. Check the bead of the tire and make sure you do not see any part of HUSKY LIMITED WARRANTY the tube left out or pinched under. The bead must be seated within Husky models HD-105, HD-105L, and HD-120 are warranted to be free the wall of the rim. from defects in materials and workmanship with the following limitation: 10. Inflate the tire by pumping 4 or 5 strokes. Check the tire seating and make sure the bead is not hanging out of the edge of the rim. TIME PERIOD 11. You c
Resumen del contenido incluido en la página 10
21 22 MAKING A WARRANTY CLAIM To make a claim under this warranty, follow these steps: 1. Do not perform any repair or replacement of any parts until an authorized HUSKY dealer inspects your bicycle or the dealer or OWNER’S RECORD manufacturer authorizes such replacement. If there are no Husky dealers in your area, contact Husky customer service at Date of Purchase ______________________ (800) 392-3337 or send an email to support@huskybicycles.com for instructions or r
