Manual de instrucciones de Human Touch iJOY-300

Resumen del contenido incluido en la página 1

February 11, 2011

REPLACING THE REMOTE
iJOY-300
®
It is imperative that Human Touch products are repaired in a manner that ensures product safety and regulatory compliance and that is fully consistent with the practices used
during the manufacturing process. Therefore, Human Touch requires that all product repairs are performed using only factory-new parts and in accordance with these repair SERVICE LEVEL: 2
instructions. Failure to adhere to these instructions voids the product warranty and

Resumen del contenido incluido en la página 2

INSTALLING THE NEW REMOTE 1. Holding the new remote next to the chair base, connect the remote connectors to the corresponding connectors on the chair base. 2. Using a flat-head screwdriver and screw, attach the green grounding wire to the chair using the threaded screw hole as shown. 3. Place the remote cable into position, then replace the plastic remote cable grommet to hold the cable in place. 4. Replace the four screws to secure the cable cover. 5. Replace the metal plate, then secure