Manual de instrucciones de Human Touch HT-7450

Resumen del contenido incluido en la página 1

April 10, 2012

REPLACING THE SEAT PAD MOUNTING CLIPS
HT-7450
®
It is imperative that Human Touch products are repaired in a manner that ensures product safety and regulatory compliance and that is fully consistent with the practices used
during the manufacturing process. Therefore, Human Touch requires that all product repairs are performed using only factory-new parts and in accordance with these repair SERVICE LEVEL: 2
instructions. Failure to adhere to these instructions voids the product

Resumen del contenido incluido en la página 2

3. Standing in front of the chair, tip the seat pad upward and rest it against the backrest (Fig.2). 4. Using a Phillips-head screwdriver, remove the two screws that secure the broken mounting clip, then remove the clip (Fig.2). 5. Place the new clip into position, then secure it using the two screws. 6. Push the seat pad firmly back down into position. Mounting clip Backside of the seat pad (Fig.2) Please send any questions or comments regarding these instructions to: documentation@humanto