Manual de instrucciones de Hans Grohe Montreux 16560XX1

Resumen del contenido incluido en la página 1

Installation Instructions / Warranty
Montreux
16540XX1
Montreux
16560XX1

Resumen del contenido incluido en la página 2

Montreux Wall-Mount Tub Filler 16540XX1 Wall-Mount Shower Mixer 16560XX1 16540XX1 16560XX1 Technical Data Operating pressure: max. 145 psi Recommended operating pressure: 14.5 - 72 psi Hot water temperature: max. 176° F* Recommended hot water temperature: 120°F - 140°F* Center distance: 6 3/4“ ± 1 3/4“ Connections ½" female: cold right hot left Tub filler flow rate @ 45 psi approx. 5.8 gpm Flow rate for handshower 2.5 gpm Backflow prevention provided by check valve. This unit is not anti-sc

Resumen del contenido incluido en la página 3

Installation During rough-in, install two 1/2” female threaded fittings, recessed 3/16” behind the surface of the finished wall. The fittings should be 6 3/4” apart on center. Flush the hot and cold supplies thoroughly. Wrap the threads on the offset adapters with TM Teflon thread tape. Screw the adapers into the female fittings. The adapters should extend 1 7/16” - 1 5/8” outside the surface of the finished wall. 1 7/16” - 1 5/8” Adjust the offset adapters so that the distance betw

Resumen del contenido incluido en la página 4

Install the escutcheons. Install the washers and the mixer. Tighten the nuts. Place a hose washer in one end of the hand- shower hose. Screw it to the handshower outlet. Place the other hose washer in the other end of the hose. Screw it to the handshower. Place the handshower in the holder. User Instructions: Turn the handles to turn the water on. The right handle controls the cold water, the left handle controls the hot water. When the diverter is in the forward position, water will

Resumen del contenido incluido en la página 5

Push the diverter to the rear to obtain water from the handshower. The check valve should be removed and checked yearly. Replacement Parts 16560XX1 10 9 5 1 8 3 2 6 5

Resumen del contenido incluido en la página 6

16540XX1 10 14 13 16 9 11 7 1 15 8 5 3 6 2 11 12 4 1 handle 16597XXX 2 screw cover cold / hot water 97987000 3 sleeve 97993XXX 4 aerator 98575XXX 5 valve cartridge 94149000 6 check valve 94074000 7 diverter assembly 98591000 8 escutcheon 98595XXX 9 noise reduction 96429000 10 offset adapters 98592001 11 sliding gear lever 98594XXX 12 cover caps 98593XXX 13 shower base 98590XXX 14 handshower 16320XX1 15 hose 28112000 16 screen washer 94246000 XXX = Colors 000 chrome plated 820 br

Resumen del contenido incluido en la página 7

Cleaning Recommendation for Hansgrohe Products Modern faucetry and shower products utilize a combination of materials to comply with the needs of the market with regard to design and functionality. To avoid damage, it is necessary to use some caution when cleaning. Damage caused by improper treatment is not covered under the Hansgrohe warranty. Cleaning Materials for Faucets and Showers • To remove lime scale, use only products made specifically for that purpose. Always follow the manufactur

Resumen del contenido incluido en la página 8

THIS WARRANTY DOES NOT COVER, AND HANSGROHE WILL NOT PAY FOR: A. Conditions, malfunctions or damage not resulting from defects in material or workmanship. B. Conditions, malfunctions or damage resulting from (1) improper installation, improper maintenance, misuse, abuse, negligence, accident or alteration, or (2) the use of abrasive or caustic cleaning agents or “no rinse” cleaning products, or the use of the product in any manner contrary to the product instructions. C. Labor or other expense