Manual de instrucciones de Grizzly G0484

Manual de instrucciones del aparato Grizzly G0484

Aparato: Grizzly G0484
Categoría: Taladro
Fabricante: Grizzly
Tamaño: 8.04 MB
Fecha de añadido: 2/16/2014
Número de páginas: 48
Imprimir el manual

Descargar

¿Cómo se utiliza?

Nuestro propósito es proporcionarte el acceso más rápido posible a los contenidos incluidos en los manuales de instrucciones del aparato Grizzly G0484. Utilizando la vista previa online, puedes ver rápidamente el índice de contenidos y pasar a la página donde encontrarás la solución a tu problema con Grizzly G0484.

Para tu comodidad

Si ver los manuales de instrucción de Grizzly G0484 directamente en esta página no es cómodo para ti, puedes utilizar dos soluciones posibles:

  • Vista en pantalla completa – Para ver cómodamente los manuales de instrucciones (sin descargarlos en tu ordenador) puedes utilizar el modo de vista en pantalla completa. Para activar la vista del manual Grizzly G0484 en pantalla completa, utiliza el botón Pantalla completa
  • Descargar al ordenador – también puedes descargar el manual de instrucciones de Grizzly G0484 a tu ordenador y guardarlo en tu colección. Sin embargo, si no quieres ocupar espacio en tu dispositivo, siempre podrás descargarlo de ManualsBase.
Grizzly G0484 Manual de instrucciones - Online PDF
Advertisement
« Page 1 of 48 »
Advertisement
Versión impresa

Muchas personas prefieren no leer el documento en la pantalla, sino en versión impresa. La opción de impresión también está prevista y puedes utilizarla haciendo clic en el enlace más arriba - Imprimir el manual. No tienes que imprimir el manual completo de Grizzly G0484, solo las páginas que elijas. Ahorra papel.

Resúmenes

A continuación encontrarás resúmenes de los contenidos incluidos en las páginas posteriores del manual de instrucciones para Grizzly G0484. Puedes utilizarlos si quieres ver rápidamente el contenido que se encuentra en la siguientes páginas del manual.

Resúmenes de contenidos
Resumen del contenido incluido en la página 1

MODEL G0484
GEARHEAD MILL/DRILL
WITH STAND
OWNER'S MANUAL
COPYRIGHT © APRIL, 2007 BY GRIZZLY INDUSTRIAL, INC., REVISED JANUARY, 2008 (TS)
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#CRTS9021 PRINTED IN CHINA

Resumen del contenido incluido en la página 2

����������������������������������������������������������������������� �������������������������������������������������������������� ���������������������������������������������������������������������� �������������������������������������������������������������������� ������������������������ ������������������������������������������������������������������ �������������������������������������������������������������������� ���������������������������������������������������������������

Resumen del contenido incluido en la página 3

Table of Contents INTRODUCTION ............................................... 2 SECTION 5: ACCESSORIES ......................... 21 Foreword ........................................................ 2 SECTION 6: MAINTENANCE ......................... 23 Contact Info ................................................... 2 Schedule ...................................................... 23 Machine Data Sheet ...................................... 3 Cleaning and Protecting .............................

Resumen del contenido incluido en la página 4

INTRODUCTION Foreword Contact Info We are proud to offer the Model G0484 Gearhead If you have any comments regarding this manual, Mill/Drill with Stand. This machine is part of a grow- please write to us at the address below: ing Grizzly family of fine metalworking machinery. When used according to the guidelines set forth in Grizzly Industrial, Inc. C this manual, you can expect years of trouble-free, /O Technical Documentation Manager enjoyable operation and proof of Grizzly’s com- P.O. Box

Resumen del contenido incluido en la página 5

Machine Data Sheet � � � � � � �� � � � �� � � � � � � � �� � � � �� �� � � � � �� � �� � � � � �� � � � � � � � �� �� � �� � � � � �� � � � � �� � � � � �� � � � � � � � �� �� � � �� � �� � � � � �� � � � � � � � � ������ ������ ����������� ����� �� ��� �������� ����������� � �������� ������ ��������������������������������������������������������������� � ���������������������������������������������������������������������������������������������� �� � � � �������� ������ ��������������������

Resumen del contenido incluido en la página 6

������������� ����� ������������ ��������������������������������������������������������������� � ��������������������������������������������������������������������������������� ����� ���� ������� ������������� ������������������������������������������������������������������������������������������������������������������������������������������� ����� ���� ����� ������������� �������������������������������������������������������������������������������������������������������������������

Resumen del contenido incluido en la página 7

Identification A B Y W C X V D U E T S F R Q N O P M G L K H J I Figure 1. G0484 Identification. A. Mill/Drill Motor N. Work Lamp B. Headstock Lift Motor O. Quill Lock Lever C. Fine Feed Knob P. Quill Depth Limiter D. Headstock Tilt Lock Bolt and Scale Q. Quill Depth Scale E. Quill Feed Lever R. Master Power Switch F. Fine Feed Lock Knob S. Emergency Stop Button G. Manual Headstock Crank T. Headstock Down Button H. Y-Axis Handwheel U. Headstock Up Button I. X-Axis Handwheel V. Power Lamp J. Powe

Resumen del contenido incluido en la página 8

� � � �� � �� � �� � � � �� � � � �� � � � �� � � �� � � � � � � �� � � � �� � � � � � � �� � � �� � � � � � �� � � � � ��� � � � � � � � � �� � � � �� � � � � � � � � � �� � � � � � � �� � �� � � � � � �� � � � � � � �� � �� � �� � � � � � � �� � �� �� � � � � � � � � �� � �� � � � � � � � �� � � � � � � ���� � � � � �� � � � � �� � � � �� � � � � � �� �� � �� �� � � � � � �� � �� � � � � � � �� � � �� � � � � � �� � � � � �� � � � � � � � �� � �� � � � � � �� � � �� � � � � �� � �� � � � � � �

Resumen del contenido incluido en la página 9

� � � � � �� � � � � � � �� � � � �� � � �� � � � � � � � � � ��� ����� ������ �������� ���� ���� � ���� � � � � � � � � � � � � � � � � � � � � � � � � � �� � � � � � � � � � � � � � � � � � � � � � � � � � � � �� ���������� ����� �� ������ ��� ��������� ���� � � � � � � � � � � � � � � � � � � � � � � � � � � � �� � ����� ���� ���������� ��������� ������� ���� � ���������� ������������� ���� ����� ���� �������� ���� ���������� �� � ����������� ���� � � � � � � � � � � � � � � � � � � � � � � �

Resumen del contenido incluido en la página 10

Additional Safety Instructions for Mill/Drills 1. UNDERSTANDING CONTROLS. Make 9. POWER DISRUPTION. In the event of a sure you understand the use and operation power outage during use of the mill/drill, of all controls before operating machine. turn OFF all switches to avoid possible sud- den start up once power is restored. 2. SAFETY ACCESSORIES. Always use a chip guard in addition to your safety glass- 10. MACHINE CARE AND MAINTENANCE. es when milling to prevent bodily injury. Never operat

Resumen del contenido incluido en la página 11

Circuit Requirements SECTION 2: CIRCUIT REQUIREMENTS Grounding 220V Single-Phase In the event of an electrical short, grounding reduces the risk of electric shock. The grounding wire in the power cord must be properly connected to the grounding prong on the plug; likewise, the outlet must be properly installed and grounded. Serious personal injury could occur if you All electrical connections must be made in accor- connect the machine to the power source dance with local codes and ordinan

Resumen del contenido incluido en la página 12

SECTION 3: SETUP Setup Safety Items Needed for Setup The following items are needed to complete the This machine presents setup process, but are not included with your serious injury hazards machine: to untrained users. Read through this entire manu- Description Qty al to become familiar with • Assistance ...................... 1 or More Persons the controls and opera- • Power Lifting Equipment ............ As Needed tions before starting the • Wrench 7mm ................................

Resumen del contenido incluido en la página 13

Inventory Clean Up Inventory Clean Up After all the parts have been removed from the The unpainted surfaces are coated with a waxy crate, you should have the following items with oil to prevent corrosion during shipment. Remove your machine: this protective coating with a solvent cleaner or citrus-based degreaser such as Grizzly’s G7895 Inventory: (Figure 3) Qty Citrus Degreaser. To clean thoroughly, some parts A. Downfeed Handles ..................................... 3 must be removed.

Resumen del contenido incluido en la página 14

Site Considerations Moving & Placing Site Considerations Moving & Placing Base Unit Floor Load Refer to the Machine Data Sheet on Page 3 for the weight and footprint specifications of your machine. Some residential floors may require The Model G0484 is a additional reinforcement to support both the heavy machine. Serious machine and operator. personal injury may occur if safe moving methods Placement Location are not used. To be safe, Consider existing and anticipated needs, size of

Resumen del contenido incluido en la página 15

Mounting to Shop Floor Mounting to Shop Assembly Floor To assemble your mill/drill: We recommend that you mount your new machine 1. Place the handwheels on the longitudinal and to the floor. Because floor materials may vary, cross lead screws, and tighten the set screw floor mounting hardware is not included. (see Figure 8). Lag shield anchors with lag bolts and anchor studs (Figure 7) are two popular methods for Set Screw anchoring an object to a concrete floor. NOTICE Anchor studs are st

Resumen del contenido incluido en la página 16

� � � 5. Push the emergency stop button in, then Test Run twist it clockwise so it pops out. When the emergency stop button pops out, the switch is reset and ready for operation (see Figure Once the assembly is complete, test run your 10). machine to make sure it runs properly and is ready for regular operation. The test run consists of verifying the following: 1) The main motor pow- ers up and runs correctly and 2) the stop button safety feature works correctly. �������� ������������ If

Resumen del contenido incluido en la página 17

3. Twist the emergency stop button clockwise Break-In so that it pops out. 4. Switch the spindle rotation dial to "F" (for- After successfully completing the Test Run, it is ward) and let the spindle run for 10 minutes. necessary run the mill/drill in each speed and direction without a load to seat the bearings. 5. Press the emergency stop button in and wait for the spindle to stop. NOTICE 6. Switch the spindle rotation dial to "R" (reverse) Only change spindle speed when the spindle and l

Resumen del contenido incluido en la página 18

SECTION 4: OPERATIONS Operation Safety Control Panel A. Power Lamp: Glows when the master power switch is ON. Damage to your eyes and lungs could result B. Headstock Up Button: Controls the head- from using this machine without proper pro- stock motor so the headstock is powerfed tective gear. Always wear safety glasses and upwards. a respirator when operating this machine. C. Headstock Down Button: Controls the headstock motor so the headstock is power- fed downwards. D. Emergency Stop

Resumen del contenido incluido en la página 19

Spindle Height Table Travel Control (X-Axis and Y-Axis) Spindle height is changed by unlocking the quill Longitudinal Feed lock lever and the fine feed knob, and using the The longitudinal feed, or X-axis, is moved by quill feed handles or the fine feed knob (Figure the handwheel at the right end of the table. The 12). The spindle scale indicates the spindle height handwheel will move the table in both direc- in inches and millimeters. tions side-to-side. One complete revolution of the handw

Resumen del contenido incluido en la página 20

Tooling Changes Drawbar Your mill/drill has an R-8 spindle taper. Follow Nut these general procedures to install and remove R-8 tooling like drill chuck arbors, face cutters, or collets of your choice. LACERATION HAZARD! Leading edges of end mills and other cutting tools can Figure 14. Unseating the arbor/cutter. be very sharp. Protect your hands with gloves or a shop 6. Clear away all items from the cutter before towel when handling. turning the mill/drill ON. To install tooling in


Manuales de instrucciones similares
# Manual de instrucciones Categoría Descargar
1 Grizzly G0484 Manual de instrucciones Batidora de mano 1
2 Grizzly 12 Speed Press G7947 Manual de instrucciones Taladro 0
3 Grizzly G0491 Manual de instrucciones Taladro 0
4 Grizzly 8 Speed Gear-Head Press G0483 Manual de instrucciones Taladro 0
5 Grizzly G0517g Manual de instrucciones Taladro 0
6 Grizzly G0463 Manual de instrucciones Taladro 2
7 Grizzly 16 Speed PRess G0485 Manual de instrucciones Taladro 0
8 Grizzly G0705 Manual de instrucciones Taladro 0
9 Grizzly 21-Bit Line Boring Machine G0643 Manual de instrucciones Taladro 1
10 Grizzly G0520 Manual de instrucciones Taladro 2
11 Grizzly G0704 Manual de instrucciones Taladro 17
12 Grizzly G1005Z Manual de instrucciones Taladro 0
13 Grizzly G0619 Manual de instrucciones Taladro 1
14 Grizzly G1004 Manual de instrucciones Taladro 1
15 Grizzly G1007 Manual de instrucciones Taladro 1
16 AllTrade COMPONENT #690551-1HR Manual de instrucciones Taladro 0
17 Ardisam Earthquake 8902 Manual de instrucciones Taladro 2
18 Ardisam Earthquake 8900 Manual de instrucciones Taladro 1
19 Ardisam Earthquake 9000 Manual de instrucciones Taladro 18
20 Ardisam Earthquake 9200 Manual de instrucciones Taladro 0