Resumen del contenido incluido en la página 1
360W
MAGNESIUM
®
ALLNAILER
ACALN
INSTRUCTION MANUAL
1
C o de: ACALN IM
Black Magenta
Cyan Yellow
D a t e: 070910 E dition: 03 Op: DCR
Resumen del contenido incluido en la página 2
Contents Warranty 2 Warranty Power Tools Introduction 3 Whilst every effort is made to ensure your complete satisfaction with this tool, occasionally, due to the mass Environmental protection 3 manufacturing techniques, a tool may not live up to our Description of symbols 3 required level of performance and you may need the Specifications 4 assistance of our service department. General safety rules 4 This product is warranted for a 2-year period for home domestic use from the date of the or
Resumen del contenido incluido en la página 3
Introduction Description of symbols Your new GMC power tool will more than satisfy The rating plate on your tool may show symbols. your expectations. It has been manufactured under These represent important information about the stringent GMC Quality Standards to meet superior product or instructions on its use. performance criteria. Wear hearing protection. You will find your new tool easy and safe to operate, Wear eye protection. and, with proper care, it will give you many years Wear
Resumen del contenido incluido en la página 4
Specifications General safety rules WARNING. Read all instructions. Failure to follow all Voltage: 230 –240V ~ 50Hz instructions listed below may result in electric shock, Input power: 360W fire and/or serious injury. The term “power tool” in all of the -1 warnings listed below refers to your mains operated (corded) Hammer rate: 0 – 4200 min power tool or battery operated (cordless) power tool. Nail length: 40mm (1-5/8") to 150mm (6") Save these instructions Nail type: Accepts all co
Resumen del contenido incluido en la página 5
3. Personal safety 4. Power tool use and care a. Stay alert, watch what you are doing and use a. Do not force the power tool. Use the correct power tool common sense when operating a power tool. for your application. The correct power tool will do the job Do not use a power tool while you are tired or under better and safer at the rate for which it was designed. the influence of drugs, alcohol or medication. A moment b. Do not use the power tool if the switch does not turn of inattention wh
Resumen del contenido incluido en la página 6
Any use other than those mentioned in this manual will Additional safety rules for nailers be considered a case of misuse. The user and not the 1. Use only the nail types indicated in this manual. manufacturer shall be liable for any damage or injury Use of accessories that are not designed for this tool resulting from such cases of misuse. could result in personal injury and / or damage to the tool. To use this tool properly, you must observe the safety 2. Do not touch metal parts of to
Resumen del contenido incluido en la página 7
Know your product 1. On/off trigger switch with variable speed control 2. Power cord 3. Nail gripping jaws 4. Jaw release button 5 5. Depth adjustment dial 6. Safety switch 4 7. Non marking jaw protector 3 6 1 7 4 2 7
Resumen del contenido incluido en la página 8
2. Press in then turn the depth Accessories B A adjustment dial (5) to the We recommend that you buy appropriate level (Fig. B). all your accessories such as nails from the store where you bought the tool. Use good quality Installing the non- accessories with a well-known marking jaw protector brand name. Store personnel ® can help and advise (Fig. A). The Allnailer comes supplied with a non marking jaw protector (7) designed to protect the Unpacking workpiece surface from the jaw ham
Resumen del contenido incluido en la página 9
Note. This product is designed for intermittent use. The Operation E recommended operational duration is 10 seconds on and WARNING. Make sure your 10 seconds off. Please operate accordingly. finger is not on the trigger switch (1) when loading Driving a nail I nails into the tool (Fig. E). 1. Once the nail is inserted in the jaws and button (4) is Safety switch released, the nail can be 1. The nailer is protected driven into the workpiece. against accidental F 2. Hold the tool such th
Resumen del contenido incluido en la página 10
CAUTION. Do not use cleaning agents to clean the plastic Variable speed K parts of the nailer. A mild detergent on a damp cloth is The variable speed feature recommended. Water must never come into contact with enables you to select the best the tool. speed for a particular application. Cleaning The farther you squeeze the 1. Keep your machine and its trigger, the faster the tool will M cord clean. The outside of the operate. machine can be cleaned using Use lower speeds for starting
Resumen del contenido incluido en la página 11
11
Resumen del contenido incluido en la página 12
GMC customer assist If your product needs repairing, replacing, technical service or you simply need help or advice, please contact us on our Customer Assist Line 1300 880 001 (Australia) or 0800 445 721 (New Zealand). For prompt service we suggest you log your service request online at www.gmcservice.com.au. Should you not have access to the Internet, please contact our service department on 1300 880 001 (Australia) or 0800 445 721 (New Zealand). 7am –7pm, 7days a week (AEST). Please n
