Manual de instrucciones de Global Machinery Company HG2000K

Resumen del contenido incluido en la página 1

INSTRUCTION MANUAL
2000W
Heat Gun Paint/
Stripper Kit
• Melbourne • Perth • Auckland • Hong Kong • Shanghai
HG2000K
• Taipei • New York • Verona • London • Paris 030825 MA ED1

Resumen del contenido incluido en la página 2

Contents Warranty 2 Full 2 Years Home Use Warranty Whilst every effort is made to ensure your complete Introduction 3 satisfaction with this tool, occasionally, due to the mass Environmental protection 3 manufacturing techniques, a tool may not live up to our required level of performance and you may need the Description of symbols 3 assistance of our service department. Specifications 3 This product is warranted for a 2-year period for home General safety instructions 4 domestic use f

Resumen del contenido incluido en la página 3

Description of symbols Dear Customer The rating plate on your tool may show symbols. These If you require any help with your product, whether it represent important information about the product or is a Warranty claim, spare part or user information, instructions on its use. please phone our Help Line for an immediate response. Wear hearing protection. Phone 1300 880 001 in Australia or 0800 445 721 in New Zealand. Wear eye protection. Wear breathing protection. Introduction Double insul

Resumen del contenido incluido en la página 4

7. Dress correctly. Do not wear loose clothing or General safety instructions jewellery. They can be caught in moving parts. Rubber To use this tool properly, you must observe the safety gloves and non-slip footwear are recommended when regulations, the assembly instructions and the operating working outdoors. If you have long hair, wear a instructions to be found in this Manual. All persons who protective hair covering. use and service the machine have to be acquainted with this Manual

Resumen del contenido incluido en la página 5

17. Stay alert. Watch what you are doing. Use common • Never leave the appliance unattended when in use. sense. Do not operate a power tool when you are • Rags, cloths, cord, string, wood shavings and the like tired. should never be left around the work area. 18. Check for damaged parts. Before using a tool, • Support the work properly. check that there are no damaged parts. If a part is • If you are interrupted when operating the appliance, slightly damaged, carefully determine if i

Resumen del contenido incluido en la página 6

Know your product 1 2 3 4 5 1. Heat Nozzle 2. Guard Sleeve 3. Body 4. LED Temperature Indicator 5. Variable Temperature Control Dial 6. Two speed rocker switch 7. Wire Stand 8. Power Cord Accessories 9. Heat Spreader 10. Heat Reflector 11. Heat Concentrator 12. Heat Deflector 6 13. Paint Scraper 14. Scraper Handle Scrapers 15. Scrapers 14 7 8 11 9 8 15 13 10 12 6

Resumen del contenido incluido en la página 7

Temperature Indicator Features: The temperature indicator gives the temperature during Two Speed Rocker Switch: operation. 6 LED’s are The rocker switch can be adjusted to 3 positions and placed on the box lid. Each these are: one represents a different temperature range: Position 0: Stop/Off LED No: Colour Temperature (C) o 1 Yellow 50 o 2 Yellow 100 o 3 Green 200 o 4 Green 350 Position 1: o 5 Red 500 50° - 550°C o 6 Red 650 Note: The temperature indicator gives the temperature for ref

Resumen del contenido incluido en la página 8

necessary. A Phillips #1 screwdriver (not supplied) is needed during the assembly. 1.Place the wire stand to the bottom of the handle, ensuring that the ends of the stand align themselves with the holes on the handle. 2.Insert the Phillips screw on one side between the end of the stand and the hole of the handle. Use the Phillips screwdriver to secure the screw. 3.Repeat this process on the other side of the handle. Note: Before you commence with the assembly,

Resumen del contenido incluido en la página 9

Carefully read the entire Instruction Manual before using this product. With continuing product development changes may Before returning this product for a have occurred which render the product received Warranty Claim or any other reason slightly different to that shown in this instruction Please Call 1300 880 001 (Australia) manual. The manufacturer reserves the right to or 0800 445 721 (New Zealand) change specifications without notice. Note: Specifications may differ from country to